-
- Keylock nose stops the carabiner from snagging when un-clipping and allows release even when under tension: On notched noses the notch catches on slings and webbing and if they are under load it is much harder to release them.
- Patented Taperlock nose increases push-in strength and helps the carabiner achieve high strengths.
- Barrel on the gate cannot be overtightened onto the nose of the carabiner: If this happens and the carabiner is then loaded it can be very difficult to undo the gate afterward.
- Offset D shape is optimised for improved ergonomics whilst maximising safety: The steep angles on the top and bottom bars drive loads into the back bar where the carabiner is strongest.
- Excellent corrosion resistance, especially with the black electrophoretic coating.
- All carabiners marked with individual serial number for full traceability.
- Hot forging the back allows us to move metal to where it is needed: This creates an I-Beam structure this is strong and light.
- Can be fitted with an RFID chip if required.
- Can be fitted with a captive bar if required.
-
- Strong, safe and secure
- One handed operation for ease of use
- Top ‘shelf’ allows in-situ gear selection
- Low nose profile minimises hook-ups
- Can be set to either the unlocked or locked position
- Max webbing size: 45 x 3mm
- WLL 3kN - Not PPE
- User installable - flat bladed screwdriver required
-
-Belay carabiner for consistent rope control and compatibility with belay devices: Belay carabiners give smooth and confident belaying with tube and assisted breaking belay devices. They have full section top bars for consistent rope control and reduced rope wear. Their shape resists flipping into sub-optimal orientations when belaying, acting to ensure the carabiner loads along its strongest axis.-Offset D carabiner for optimal loading and ergonomics: D-Shaped carabiners encourage loading in their strongest orientation by forcing loads toward the carabiner spine. An Offset D refines this basic design by extending the top bar, increasing internal volume. This improves handling and compatibility with thick ropes and slings.-Nylon clip ensures carabiner loads correctly-Full section top bar for consistent rope handling and increased longevity: A rope running over a full section top bar has more consistent handling characteristics than one running over an I-Beam surface. Our belay carabiners feature full section top bars for greater control rope control. Ropes loading over full section bar also bend less than those loaded over I-Beam surfaces, increasing rope longevity-Keylock nose eliminates snagging-I-Beam construction for optimum strength to weight ratio: I-Beam construction techniques allow carabiners to be lighter without compromising strength. This is achieved through hot forging, a process which allows metal to be made into complex shapes that improve functionality.Please, contact us for more information and prices
-
The Petzl Bm'D lightweight asymmetrical carabiner with triact-lock automatic locking system, is suited for connection to diverse equipment such as descenders or positioning lanyards. Its fluid interior design and Keylock system facilitate handling. The sleeve is reinforced for greater front and lateral gate strength. The H-shaped cross-section ensures an improved strength-to-weight ratio and protects markings from abrasion.
-
-Compact, lightweight and versatile.
-Designed to ensure main axis loading.
-"Rhino horn" ensures device remains in loading area.
-Incorporates DMM's shortest gate.
-Low overall length well suited to restricted height scenarios.
-Patented and pat. features.
-Hot forged and CNC machined.
-
-Removable connector: Gated connection point allows for direct attachment of the connector to the lanyards.
-Facilitates handling when passing intermediate anchors:Thanks to an ergonomic shape, automatic double-action locking system and a wide opening.
-H-shaped cross-section: This ensures an improved strength to weight ratio.Please, Contact us for more information and prices -
-Belay carabiner for consistent rope control and compatibility with belay devices: Belay carabiners give smooth and confident belaying with tube and assisted breaking belay devices. They have full section top bars for consistent rope control and reduced rope wear. Their shape resists flipping into sub-optimal orientations when belaying, acting to ensure the carabiner loads along its strongest axis.
-Directional belay carabiner designed to ensure optimum orientation when belaying-Downward opening internal wiregate enables secure attachment to belay loop in one movement, and prevents accidental removal once located-Keylock nose eliminates snagging: This carabiner’s nose slots into a groove in the gate, allowing it to achieve full strength without a gate notch. This creates a clean internal profile that won’t catch on gear, bolts or slings, giving easier clipping and removal from systems.-I-Beam construction for optimum strength to weight ratio-Full section top bar for consistent rope handling and increased longevity: A rope running over a full section top bar has more consistent handling characteristics than one running over an I-Beam surface. Our belay carabiners feature full section top bars for greater control rope control. Ropes loading over full section bar also bend less than those loaded over I-Beam surfaces, increasing rope longevity.-Pronounced horn and flat base encourage optimal loading: The top of the Ceros' spine prevents assisted breaking devices and rope controllers from twisting around the spine and cross-loading the carabiner.-Captive bar version allows installation in tamper proof systems -
-Belay carabiner for consistent rope control and compatibility with belay devices: Belay carabiners give smooth and confident belaying with tube and assisted braking belay devices. They have full section top bars for consistent rope control and reduced rope wear. Their shape resists flipping into sub-optimal orientations when belaying, acting to ensure the carabiner loads along its strongest axis. -Offset D carabiner for optimal loading and ergonomics: D-Shaped carabiners encourage loading in their strongest orientation by forcing loads toward the carabiner spine. An Offset D refines this basic design by extending the top bar, increasing internal volume. This improves handling and compatibility with thick ropes and slings. -Keylock nose eliminates snagging: This carabiner's nose slots into a groove in the gate, allowing it to achieve full strength without a gate notch. This creates a clean internal profile that won't catch on gear, bolts or slings, giving easier clipping and removal from systems -I-Beam construction for optimum strength to weight ratio: I-Beam construction techniques allow carabiners to be lighter without compromising strength. This is achieved through hot forging, a process which allows metal to be made into complex shapes that improve functionality. -Full section top bar for consistent rope handling and increased longevity: A rope running over a full section top bar has more consistent handling characteristics than one running over an I-Beam surface. Our belay carabiners feature full section top bars for greater control rope control. Ropes loading over full section bar also bend less than those loaded over I-Beam surfaces, increasing rope longevity. -Pronounced horn and flat base encourage optimal loading: The top of the Rhino's spine prevents assisted braking devices and rope controllers from twisting around the spine and cross-loading the carabiner. The Rhino's flat base helps it sit in the belay loop, and works with the horn to help the Rhino orientate correctly.
-
-Rigging carabiner for strength and ease of handling: Rigging carabiners are used at critical connection points in rigging and anchor systems. They are built to be strong, and have large gate openings, internal volumes, and extended rope baskets. This makes them easier to handle with gloves on, and allows them to accommodate thick ropes, and multiple knots or slings. -HMS carabiner for ease of rigging: HMS carabiners have extended top bars to accommodate multiple attachments like slings and knots. Their top bars are curved, allowing attachments to self centre and encouraging optimal loading. HMS carabiners tend to be large, for better compatibility with thick ropes and while wearing gloves. -Large gate opening and high internal volume for easy handling and more attachment options: The gate opening is the distance between the nose of a carabiner and the gate when it is fully opened. Larger gate openings make a carabiner easier to use while wearing gloves, and with thick ropes and slings. Internal volume refers to the area inside a carabiner, and large internal volumes mean easier attachment and removal of multiple devices, knots and slings. -Taperlock nose gives high push-in strength: The nose design on these carabiners helps them resist shearing forces and achieve high side loading strength ratings. Taperlock is an evolution of our Keylock design, which gives a clean internal profile that prevents snagging on gear, bolts and slings. -I-Beam construction for optimum strength to weight ratio: I-Beam construction techniques allow carabiners to be lighter without compromising strength. This is achieved through hot forging, a process which allows metal to be made into complex shapes that improve functionality. Please, contact us for more information and prices
-
-Rigging carabiner for strength and ease of handling: Rigging carabiners are used at critical connection points in rigging and anchor systems. They are built to be strong, and have large gate openings, internal volumes, and extended rope baskets. This makes them easier to handle with gloves on, and allows them to accommodate thick ropes, and multiple knots or slings. -Klettersteig carabiner for ease of handling: Klettersteig carabiners are wide, maximising gate opening and the internal working volumes for ease of use with gloves, thick ropes, and wide webbing. They also encourage loading in their strongest orientation by forcing loads toward the carabiner spine. -Large gate opening and high internal volume for easy handling and more attachment options: The gate opening is the distance between the nose of a carabiner and the gate when it is fully opened. Larger gate openings make a carabiner easier to use while wearing gloves, and with thick ropes and slings. Internal volume refers to the area inside a carabiner, and large internal volumes mean easier attachment and removal of multiple devices, knots and slings. -Taperlock nose gives high push-in strength: The nose design on these carabiners helps them resist shearing forces and achieve high side loading strength ratings. Taperlock is an evolution of our Keylock design, which gives a clean internal profile that prevents snagging on gear, bolts and slings -I-Beam construction for optimum strength to weight ratio: I-Beam construction techniques allow carabiners to be lighter without compromising strength. This is achieved through hot forging, a process which allows metal to be made into complex shapes that improve functionality Please, contact us form more information and prices
-
-Rigging carabiner for strength and ease of handling: Rigging carabiners are used at critical connection points in rigging and anchor systems. They are built to be strong, and have large gate openings, internal volumes, and extended rope baskets. This makes them easier to handle with gloves on, and allows them to accommodate thick ropes, and multiple knots or slings -Offset D carabiner for optimal loading and ergonomics: D-Shaped carabiners encourage loading in their strongest orientation by forcing loads toward the carabiner spine. An Offset D refines this basic design by extending the top bar, increasing internal volume. This improves handling and compatibility with thick ropes and slings. -Taperlock nose gives high push-in strength: The nose design on these carabiners helps them resist shearing forces and achieve high side loading strength ratings. Taperlock is an evolution of our Keylock design, which gives a clean internal profile that prevents snagging on gear, bolts and slings. -I-Beam construction for optimum strength to weight ratio: I-Beam construction techniques allow carabiners to be lighter without compromising strength. This is achieved through hot forging, a process which allows metal to be made into complex shapes that improve functionality. Please, contact us for more information and prices
-
-Taperlock nose gives high push-in strength: The nose design on these carabiners helps them resist shearing forces and achieve high side loading strength ratings. Taperlock is an evolution of our Keylock design, which gives a clean internal profile that prevents snagging on gear, bolts and slings. -I-Beam construction for optimum strength to weight ratio: I-Beam construction techniques allow carabiners to be lighter without compromising strength. This is achieved through hot forging, a process which allows metal to be made into complex shapes that improve functionality. -Large gate opening and high internal volume for easy handling and more attachment options: The gate opening is the distance between the nose of a carabiner and the gate when it is fully opened. Larger gate openings make a carabiner easier to use while wearing gloves, and with thick ropes and slings. Internal volume refers to the area inside a carabiner, and large internal volumes mean easier attachment and removal of multiple devices, knots and slings. -Available with a captive bar to secure orientation and prevent tampering: Captive bars ensure carabiners load along their strongest axis by securing their orientation, and can also be used to create tamper proof systems that cannot be dismantled by users. Please, contact us for more information and prices
-
-Keylock nose eliminates snagging: This carabiner's nose slots into a groove in the gate, allowing it to achieve full strength without a gate notch. This creates a clean internal profile that won't catch on gear, bolts or slings, giving easier clipping and removal from systems. -Oval carabiner for rigging stability and central positioning of attachments: Oval carabiners have curved rope baskets for compatibility with slings, ropes, pulleys, and devices. The baskets allow attachments to self-centre when loaded, giving greater stability in systems that D shaped carabiners. Their symmetry allows them to work both ways in rigging systems. -I-Beam construction for optimum strength to weight ratio: I-Beam construction techniques allow carabiners to be lighter without compromising strength. This is achieved through hot forging, a process which allows metal to be made into complex shapes that improve functionality. -Available with a captive bar to secure orientation and prevent tampering: Captive bars ensure carabiners load along their strongest axis by securing their orientation, and can also be used to create tamper proof systems that cannot be dismantled by users.
-
- Versatile and lightweight keylock HMS Screwgate (56g) -Strong and light I-Beam construction -A modern interpretation of the HMS (Pear) shape to encourage correct loading and increase volume to enable improved handling and compatibility with thicker ropes and slings -Keylock nose to eliminate snagging Please contact us for more information and price
-
-Personal Locking Carabiner for versatility and low weight: Personal lockers are used where weight and size are as important as strength, such as on sling runners and for most connection points on belay stances. In a standard 2 person climbing team, most of your locking carabiners will be personal lockers. -Offset D carabiner for optimal loading and ergonomics: D-Shaped carabiners encourage loading in their strongest orientation by forcing loads toward the carabiner spine. An Offset D refines this basic design by extending the top bar, increasing internal volume. This improves handling and compatibility with thick ropes and slings. -Keylock nose eliminates snagging: This carabiner's nose slots into a groove in the gate, allowing it to achieve full strength without a gate notch. This creates a clean internal profile that won't catch on gear, bolts or slings, giving easier clipping and removal from systems. -I-Beam construction for optimum strength to weight ratio: I-Beam construction techniques allow carabiners to be lighter without compromising strength. This is achieved through hot forging, a process which allows metal to be made into complex shapes that improve functionality. Please contact us for more information and price
-
Please, contact us for more information and price-An extremely quiet screwgate carabiner for covert urban climbing operations: Also an excellent size and weight for general purpose use. -Significantly reduced sound signature of the gate mechanism and all other contact surfaces: Proprietary dampers manage the distinctive 'click' of the gate mechanism when opened or snapped closed. -Reduced coating over all the main surfaces but also leaving an exposed aluminium rope basket: Maintains good wear characteristics. -Certified to EN12275:2013 (Mountain Equipment - Connectors) and EN362:2004 (PPE against falls from height).
-
Shadow Screwgate A302MG Matt Grey 62 x 102mm 50g Shadow Kwiklock A303MG Matt Grey 62 x 102mm 57g Shadow Locksafe A307MG Matt Grey 62 x 102mm 58g -
A very lightweight pole to deploy ropes and ladders for urban and maritime access issues. Suitable for vertical access urban entry requirements as well as VBSS and ship boarding. Constructed from 3K Carbon Fibre. Compatible with REBS and Yates hooks as well as others which use 4-5mm rods. Please contact us for more information and price
-
Developed with Mountain Rescue teams. The Talon was developed with input from Mountain Rescue Teams, and in particular the Cockermouth Mountain Rescue Team for back-roping stretchers on steep ground where the consequences of a failure are not catastrophic. Each leg is laser cut from sheet aluminium. Servicing available from DMM Please contact us for more information and price
-
Based on key components of the reliable DMM Fly Axe, the Claw has been designed for specialist personnel operating on steep ground where an absence of handholds make movement difficult Please contact us for more information and price
-
Designed to be put into hairline cracks, subtle seams and indistinct features. The Peckers knife-thin, double tapered blade fits where nothing else will. Integrated wire-cabled sling. Please contact us for more information and price
-
A removable and reusable sliding I-beam anchor, easy to place and remove. This anchor is designed to easily glide along the beam while trailing the worker. The D-ring is centered on the anchorage connector for ease of sliding on beam flanges. Particularly in rope access applications, bodyweight may disengage the centering feature in some loading conditions. This is not a safety concern, but it may affect usability. Please contact us for more information and price
-
The CMI Grappling hook has been designed in conjunction with military and law enforcement tactical experts to serve as an alternate means of entry. Please contact us for more information and price
-
Slightly oversized, for hooking larger edges and flakes than the Cliffhanger, the Grappling Hook's wide bidpod is remarkably stable, even on small edges. The long throw allows this hook to clear larger placements than the Cliffhanger. Please contact us for more information and price
-
Lightweight for their strength and size. Numbered for quick identification. Please contact us for more information and price
-
Three-in-one aid hook. Increased stability due to extra broad base. Covers edges and holes from 4.8mm to 13mm. Please contact us for more information and price
-
Hooking small to medium flakes, edges and rugosites, the cliffhanger is an indispensable tool on necky aid lines. Chiselled point and flat tip for stability. Bi-pod base to reduce rotation. Please contact us for more information and price
-
Ergonomic thumb press gives stable handling A hot forged thumb press gives quick placement and retrieval, and stable handling. The thumb press allows cams to have an extendable sling without sacrificing strength – Dragon cams from size 1 upward, have a 14kN strength rating. TripleGrip lobes for increased holding power and reduced walking Extendable sling reduces rope drag and rack weight Dual axle design for expanded range Please contact us for more information and price
-
Wired Torque Nuts can be used to protect parallel sided cracks. Their shape means they can be used in multiple orientations, giving you a wide range of placement options with every piece. Lightweight aluminium alloy construction means that despite their low weight, each Wired Torque Nut has a 12kN strength rating. Please contact us for more information and price
-
Curved taper gives stable placements and resists lifting out A Wallnut's curving taper fits a wide variety of cracks in different rock types. Their design creates three points of contact between the nut and rock in a placement, giving stable placements that resist lifting out. Allows placement in two orientations for increased versatility Grooved faces improve security in irregular rock Colour coded for easy size identification Please contact us for more information and price
-
Lightweight aluminium construction. Compact and portable design which facilitates 'in-line' use in rigging systems. Swivel attachment points diminish potentially dangerous torsional and off-axis forces. Features two sampling modes - 'slow' for monitoring and 'fast' for drop-testing. Monitors forces wirelessly on iPhone with built-in Bluetooth connectivity. Measures forces in kg, lbf and kN. Please contact us for more information and price
-
Install and remove rope while still connected to the anchor. Sideplate locks with two-stage, double-catch safety mechanism. Integrated swivel allows pulley to orient while reducing gain. Connect, install and remove rope with one hand. CNC machined for optimal weight and strength. Please contact us for more information and price
-
Install and remove rope while still connected to the anchor. Sideplate locks with two-stage, double-catch safety mechanism. Integrated swivel allows pulley to orient while reducing gain. Connect, install and remove rope with one hand. CNC machined for optimal weight and strength. Please contact us for more information and price
-
Please contact us for more information and priceTextile-friendly Hot forged aluminium shackles and CNC'd swivels User maintainable grease port for bearing longevity Double locking high tensile stainless steel axles for durability Roller thrust bearings for smooth efficiency Shackle uses 4mm and 2mm Allen keys to ensure secure locking
-
Please contact us for more information and price
-
Hot forged and CNC machined from heat treated, 7075 T6 Aluminium alloy Stainless Steel axles 'Textile friendly' attachment points with large radii Please contact us for more information and price
-
Textile friendly connection points suitable for rope, webbing and opposed connectors Central hole can accommodate a running rope and facilitates 3D rigging CNC machined from top grade alloy for strength, durability and lightness Recommended for rescue and rigging applications Please contact us for more information and price
-
Four sizes for all rigging configurations Textile friendly surfaces with large radii Centralised connection point for stable rescuer attachment Can be bolted together for '100% redundancy' in system CNC machined from high strength heat treated Aluminium Conforms to NFPA 1983 (2012 Ed) Class G Please contact us for more information and price
-
DMM Anchor Rings are simple, functional anchor components that work seamlessly with connectors and textile components. They are ideal when a tamperproof linking component is preferred over opening connectors, such as establishing remote anchor points. Please contact us for more information and price
-
Conical leading edge guides cone through anchor components reliably and with little resistance, then locates in retrieval element. Please contact us for more information and price
-
This accessory cord features a uniquely braided Technora Core which doubles the strength of a standard 5.9mm accessory cord. Please contact us for more information and price
-
Please contact us for more information and price
-
Tool-less locking of leg sections using captive 'push pins'. Swivel and lock feet give rapid change between load-spreading surface and stainless steel spike. Dedicated guying points for additional security. Max height under swivel anchor point: 2200mm. Max width with long cross-head: 400mm. Weight including all accessories: 22kg. EN 795:2012 Type B, CEN/TS 16415:2013 Type B Please contact us for more information and price
-
The Rock Exotica Arizona Vortex is an artificial high directional system and anchor point. It offers unlimited versatility and configuration options for rescues, lowers and hauling of equipment across all types of terrain, buildings and structures. Please contact us for more information and price
-
Fairlead flares increase efficiency The pulleys side plates are angled away from the sheave, giving a reduced bend radius and increasing efficiency if the ropes run over them. Hot forged body reduces wear on ropes Stainless steel spindles for corrosion resistance Rope friendly attachment points gives versatile connection options Please contact us for more information and price
-
Extemely compact and lightweight, while maintaining same capacity of larger Kootenay-style pulleys. Simplifies high-strength tie-off with a single locking screw, stowable within the axle. Uses two independent sealed ball bearings for increased durability and efficiency. Two additional holes to separate tag lines and hoist lines, helping prevent spinning of the load and interference with connectors. Please contact us for more information and price
-
Please contact us for more information and price
-
Compact system - Only 32cm from end to end when compressed. Modular - Cartridges can be exchanged to reconfigure the RPM system for a wide range of uses. Dual Control - Prusik can be installed at either end of system, for control by either operator being lowered, operator at top anchor, or both operators simultaneously. RPM bodies feature swivel components for torsion resistance. Bespoke eye-to-eye friction hitch cord is matched to side plates for effective Prusik minding function with minimum 'sit back' between lifts. Low stretch 10mm cord and sealed ball bearings in sheaves ensure efficient hauling. Easy-to-use locking pins for simple connection/disconnection of friction hitch cord. Available in 15m or 30m rope length versions. Please contact us for more information and price
-
Recessed axle screw sits flush to pulley sideplates, creating slim, snag-free profile. Machined—not stamped parts, create a stronger pulley, increasing its strength-to-weight ratio. Axle is integrated into sideplates, adding additional strength and rigidity to the pulley. Machined sideplates allow for a more compact design while maintaining the same rope capacity of other pulleys. Utilizes high-efficiency bearings. Please contact us for more information and price
-
Please contact us for more information and price
-
Super-light quickdraw for minimum weight. Super-light carabiners are mounted on slim-line Dynatec to create quickdraws that minimise weight. These quickdraws are suitable for alpine climbing, trad onsighting, and any other scenario where minimum weight is desirable. Mounted on Dynatec to balance low weight and durability. Wire gate carabiners for maximum weight saving. Fully clean nose for extra security. I-Beam construction for optimum strength to weight ratio. Contrasting carabiner colours identify rope and gear ends of quickdraw. Please contact us for more information and price
-
Steel Locking carabiner for maximum strength and resistance to wear Steel carabiners are very strong and highly resistant to wear. They are suited to environments where they will be subjected to high loads and heavy use, such as climbing walls and outdoor centres. Oval carabiner for rigging stability and central positioning of attachments I-Beam construction for optimum strength to weight ratio Keylock nose eliminates snagging Please contact us for more information and price
-
Keylock nose stops the carabiner from snagging when un-clipping and allows release even when under tension. On notched noses the notch catches on slings and webbing and if they are under load it is much harder to release them. Patented Taperlock nose increases push-in strength and helps the carabiner achieve high strengths. Barrel on the gate cannot be overtightened onto the nose of the carabiner. Offset D shape is optimised for improved ergonomics whilst maximising safety. Excellent corrosion resistance, especially with the black electrophoretic coating. All carabiners marked with individual serial number for full traceability. Hot forging the back allows us to move metal to where it is needed. Can be fitted with an RFID chip if required. Can be fitted with a captive bar if required. Please contact us for more information and price
-
Captive eye for permanent connection Sometimes it is essential for a connector to stay in the correct orientation or to be permanently attached to a system. The DMM captive eye connectors, with their textile friendly attachment holes, can be stitched into a rope or webbing loop, or swaged directly onto cable. They provide predicable direction of load and total security as the connector cannot be removed or misaligned. Keylock clean nose for snag free connection Please contact us for more information and price
-
Large sheave tread diameter for large bend radius High efficiency roller bearings Full strength becket accepts most carabiners or direct textile connection Removable captive bar DMM iD optional Keylock nose for snag free operation Uniquely profiled spine to aid correct orientation Please contact us for more information and price
-
Keylock nose eliminates snagging This carabiner's nose slots into a groove in the gate, allowing it to achieve full strength without a gate notch. This creates a clean internal profile that won't catch on gear, bolts or slings, giving easier clipping and removal from systems. I-Beam construction for optimum strength to weight ratio Integrated pulley wheel for reducing friction Please contact us for more information and price
-
A true oval shape carabiner with keylock nose. The shape provides effective centring of loads and the fully rounded rope bearing areas increase carabiner and rope longevity. The keylock nose allows snag-free operation. Smallest Locksafe gated carabiner that DMM makes and is 14mm shorter than an Ultra O yet still retains a strong construction. Please contact us for more information and price
-
The design facilitates rope glide on the first few meters. Toothed cam with self-cleaning slot optimises performance under any conditions. Mechanism is totally integrated into the body of the rope clamp to help prevent snagging. Releases from the rope with a simple backwards movement of the foot. Easy and quick adjustment with DoubleBack buckle. Please contact us for more information and price
-
Standards:- EN 12841/B for semi-static ropes ranging from 10 to 13 mm.- EN 567 for semi-static and dynamic ropes ranging from 8 to 13 mm.Please contact us for more information and price
-
Offers constant fall protection when working at height. Integrated locking function allows the user to immobilize the device in order to reduce the length of a fall. Simple to use, yet effective. Please contact us for more information and price
-
Constant fall protection. Simple to use and very effective. Certified to European standards when used with an OK TRIACT-LOCK carabiner. Please contact us for more information and price
-
Designed for use on 10.5 - 11mm ropes conforming to EN 1891:1998 Rated for single person loading Free-following protection both up and down a safety line. Constant cam angle for smooth and predictable operation. Screw lockable for semi-permanent attachment to rope. Easily cleaned and inspected. Tether cord facility. Large attachment eye for multiple connections. Please contact us for more information and price
-
High performance internal geometry gives greater rope control Hot forging and CNC technology is used to shape the internal structure of the device to give greater control over a wide range of ropes. This is especially evident when using modern, small diameter ropes. Two friction modes for varying applications Please contact us for more information and price
-
Belay device gives controlled belaying, lowering and abseiling Pivot enables guide mode and gives easily controlled lowering of two seconds High performance internal geometry gives greater rope control Two friction modes for varying applications Please contact us for more information and price
-
Features a faceted ratcheting sheave of stainless steel. Combines the attributes of more expensive multipurpose devices with those of less sophisticated wearable personal descenders. The double latched side-plate is independant of the devices attachment point. Patented mechanical geometry inside the device and an ergonomic handle. Please contact us for more information and price
