-
A fully modular system – The HCMH consists of a riggers belt which has been tested to the standards required to meet EN358. The addition of leg loops provide provides a sit harness that has been certified to EN12277 type C. The combination of belt, leg loops and chest harness provide a full body harness that is certified to EN361. This system allows the user to change the capability from a riggers belt to a sit harness or full body harness in less than a minute. Compatibility – The HCMH has been designed to be compatible with current ‘on the man’ in-service equipment, which ensures the comfort and safety of the end user. Plate carriers, buoyancy aids and belt worn equipment are routinely worn by end users and the HCMH has been designed with this in mind. Please contact us for more information and price
-
The Helix R3 Waist Harness is comprised of the Riggers Belt and Leg Loops, and has been designed specifically for military operational use for a wide range of missions and tasks across all environments. The harness is certified to EN12277 (mountaineering equipment-harness) Type C. Please contact us for more information and price
-
- All-round tactical climbing harness for performance and comfort in any environment
- Fully adjustable for use with a variety of layering systems
- Seven gear loops for extensive racking options
- Ventilated padding for comfort and breathability
- Vault Slots for ice screw racking
- Slide Lock buckles gives quick and secure fit adjustments
- Closed cell foam construction and internal spreading plate gives effective lumbar support
-
· Breaking load in excess of 25kN and an increased maximum working load of 200kg. · Recommended for descending up to a maximum load of 100m at a time. · Conforms to EN 341 (Personal Protective Equipment against falls from height) with 11mm ropes. · Conforms to EN 12841 (Personal Fall Protection Equipment - Rope Access Systems) when used with ropes between 10mm and 12mm. Please contact us for more information and price
-
Features a faceted ratcheting sheave of stainless steel. Combines the attributes of more expensive multipurpose devices with those of less sophisticated wearable personal descenders. The double latched side-plate is independant of the devices attachment point. Patented mechanical geometry inside the device and an ergonomic handle. Please contact us for more information and price
-
High performance internal geometry gives greater rope control Hot forging and CNC technology is used to shape the internal structure of the device to give greater control over a wide range of ropes. This is especially evident when using modern, small diameter ropes. Two friction modes for varying applications Please contact us for more information and price
-
Designed for use on 10.5 - 11mm ropes conforming to EN 1891:1998 Rated for single person loading Free-following protection both up and down a safety line. Constant cam angle for smooth and predictable operation. Screw lockable for semi-permanent attachment to rope. Easily cleaned and inspected. Tether cord facility. Large attachment eye for multiple connections. Please contact us for more information and price
-
The design facilitates rope glide on the first few meters. Toothed cam with self-cleaning slot optimises performance under any conditions. Mechanism is totally integrated into the body of the rope clamp to help prevent snagging. Releases from the rope with a simple backwards movement of the foot. Easy and quick adjustment with DoubleBack buckle. Please contact us for more information and price
-
A true oval shape carabiner with keylock nose. The shape provides effective centring of loads and the fully rounded rope bearing areas increase carabiner and rope longevity. The keylock nose allows snag-free operation. Smallest Locksafe gated carabiner that DMM makes and is 14mm shorter than an Ultra O yet still retains a strong construction. Please contact us for more information and price
-
Keylock nose eliminates snagging This carabiner's nose slots into a groove in the gate, allowing it to achieve full strength without a gate notch. This creates a clean internal profile that won't catch on gear, bolts or slings, giving easier clipping and removal from systems. I-Beam construction for optimum strength to weight ratio Integrated pulley wheel for reducing friction Please contact us for more information and price
-
Large sheave tread diameter for large bend radius High efficiency roller bearings Full strength becket accepts most carabiners or direct textile connection Removable captive bar DMM iD optional Keylock nose for snag free operation Uniquely profiled spine to aid correct orientation Please contact us for more information and price
-
Captive eye for permanent connection Sometimes it is essential for a connector to stay in the correct orientation or to be permanently attached to a system. The DMM captive eye connectors, with their textile friendly attachment holes, can be stitched into a rope or webbing loop, or swaged directly onto cable. They provide predicable direction of load and total security as the connector cannot be removed or misaligned. Keylock clean nose for snag free connection Please contact us for more information and price
-
Keylock nose stops the carabiner from snagging when un-clipping and allows release even when under tension. On notched noses the notch catches on slings and webbing and if they are under load it is much harder to release them. Patented Taperlock nose increases push-in strength and helps the carabiner achieve high strengths. Barrel on the gate cannot be overtightened onto the nose of the carabiner. Offset D shape is optimised for improved ergonomics whilst maximising safety. Excellent corrosion resistance, especially with the black electrophoretic coating. All carabiners marked with individual serial number for full traceability. Hot forging the back allows us to move metal to where it is needed. Can be fitted with an RFID chip if required. Can be fitted with a captive bar if required. Please contact us for more information and price
-
Steel Locking carabiner for maximum strength and resistance to wear Steel carabiners are very strong and highly resistant to wear. They are suited to environments where they will be subjected to high loads and heavy use, such as climbing walls and outdoor centres. Oval carabiner for rigging stability and central positioning of attachments I-Beam construction for optimum strength to weight ratio Keylock nose eliminates snagging Please contact us for more information and price
-
Super-light quickdraw for minimum weight. Super-light carabiners are mounted on slim-line Dynatec to create quickdraws that minimise weight. These quickdraws are suitable for alpine climbing, trad onsighting, and any other scenario where minimum weight is desirable. Mounted on Dynatec to balance low weight and durability. Wire gate carabiners for maximum weight saving. Fully clean nose for extra security. I-Beam construction for optimum strength to weight ratio. Contrasting carabiner colours identify rope and gear ends of quickdraw. Please contact us for more information and price
-
Recessed axle screw sits flush to pulley sideplates, creating slim, snag-free profile. Machined—not stamped parts, create a stronger pulley, increasing its strength-to-weight ratio. Axle is integrated into sideplates, adding additional strength and rigidity to the pulley. Machined sideplates allow for a more compact design while maintaining the same rope capacity of other pulleys. Utilizes high-efficiency bearings. Please contact us for more information and price
-
Compact system - Only 32cm from end to end when compressed. Modular - Cartridges can be exchanged to reconfigure the RPM system for a wide range of uses. Dual Control - Prusik can be installed at either end of system, for control by either operator being lowered, operator at top anchor, or both operators simultaneously. RPM bodies feature swivel components for torsion resistance. Bespoke eye-to-eye friction hitch cord is matched to side plates for effective Prusik minding function with minimum 'sit back' between lifts. Low stretch 10mm cord and sealed ball bearings in sheaves ensure efficient hauling. Easy-to-use locking pins for simple connection/disconnection of friction hitch cord. Available in 15m or 30m rope length versions. Please contact us for more information and price
-
Extemely compact and lightweight, while maintaining same capacity of larger Kootenay-style pulleys. Simplifies high-strength tie-off with a single locking screw, stowable within the axle. Uses two independent sealed ball bearings for increased durability and efficiency. Two additional holes to separate tag lines and hoist lines, helping prevent spinning of the load and interference with connectors. Please contact us for more information and price
-
Fairlead flares increase efficiency The pulleys side plates are angled away from the sheave, giving a reduced bend radius and increasing efficiency if the ropes run over them. Hot forged body reduces wear on ropes Stainless steel spindles for corrosion resistance Rope friendly attachment points gives versatile connection options Please contact us for more information and price