- Measures 8' by 6' 8"
- Camouflage on one side and dark green on the other
- Reinforced button holes around edges every 2' for attachment
- Easily folds for smaller use
- Hood in one corner for use as a personal concealment
- Compacts very small into included 8" by 6" drawstring bag
- Weighs 13.5oz.
- 100% Made in the USA
-
-
- Carries minimum amount of kit for short duration missions
- Carries 100oz/3L water bladder
- Top row of pouches carry 4 flash bangs or 4 40mm grenades
- Upper zipper pouch holds SOCOM issued NVG protective insert
- Removable medical pouch
- Attachment: PALS compatible Helium Whisper® system
- 100% Made in the USA
- Color: Black, Coyote Brown
-
- he Low Vis Assault Carrier (LVC) will only hold Velocity Systems Ultra Low-Visibility (ULV) Plates and/or the ULV Soft Armor Inserts. The LVC will not hold SAPI or shooter/swimmer cut plates.
- 500 Denier Cordura outer carrier
- SwiftClip® attachment system to don/doff placards and chest rigs
- Integrated Admin Pouch on upper chest with loop face
- Kangaroo pouch for magazine inserts
- Elastic loops on interior to route comm wires
- Elastic pouches on the cummerbund for magazines or radios
- Armor/Plates Sold Separately
- Two Cummerbund Options: Low-Profile Elastic (CBN1) & Molle, Plate Pocket (CBN6)
- 100% Made in the USA
-
- The Low Vis Carrier (LVC) will only hold Velocity Systems Ultra Low-Visibility (ULV) Plates and/or the ULV Soft Armor Inserts. The LVC will not hold SAPI or shooter/swimmer cut plates.
- 500 Denier Cordura outer carrier
- SwiftClip® attachment system to don/doff placards and chest rigs
- Elastic loops on interior to route comm wires
- Armor Sold Separately
- 100% Made in the USA
-
- Convert any carrier with molle on front and rear, to a carrier with front flap access and an adjustable cummerbund
- Flaps have molle webbing on outside, no webbing space is lost
- Interior mesh pockets with plate straps hold 6"x"6 or 6"x8" side armor inserts
- 100% Made in the USA
-
- Lightweight, low profile cummerbund replacement option
- 2 Quick Release Buckles
- 1½ ” Webbing
- 100% made in the USA
-
- Attaches via Helium Whisper® attachment system
- Designed to hold up to .75” thick side plates
- Designed to attach to most MOLLE compatible cummerbunds
- Can be worn on the inside or outside of the cummerbund depending on location of MOLLE and user preference
- Plate is secured with a foldable 500D Cordura flap that adheres with a hook and look fastener
- Set (Right and Left Plate Pocket)
- Weight: 2.08oz
- Material: 500D Cordura Nylon
- 100% made in the USA
-
- Secure larger plates in cummerbund
- 500D Cordura
- Hook and loop
- Sold as a set (2 right and left)
- 100% Made in the USA
-
- Can be setup for dual or single Quarter Flap opening
- Provides 6”x6” Side Plate pockets
- Allows for easy reconfiguration for mission specific needs
- 100% Made in the USA
-
- Fourteen laser cut PALS columns for attaching the necessary pouches
- Three-inch wide laser cut h-harness
- Weighs only 12 ounces
- Compatible with our plate carriers that feature the SwiftClip® attachment points
- 100% made in the USA
-
- Carries M4 type PMAGS, 7.62x51 PMAGS and AK PMAGS
- Two large general-purpose pouches
- Center zipper closure
- Comes with our ULTRAcomp 2” H-Harness
- Material: Squadron
- All buckles are ITW-Nexus
- 100% Made in the USA
-
- Modular, lightweight, and versatile
- Can be run as a stand-alone chest rig (MCCR), or as a placard (MCP)
- Accessory options including, 7 different magazine inserts, 2 radio inserts, MOLLE Side Flaps, a Kangaroo Zipper Top, and a Lower Abdomen Pouch
- 5 rows of 6 column MOLLE
- Kangaroo pouch for magazine inserts or the Kangaroo Zipper Top
- Built-in map pocket
- Side envelops pockets to add radio inserts or MOLLE side flaps
- Bottom envelope pocket to add a Lower Abdomen Pouch
- Harness comes with Padded Shoulder Sleeves, 4 row x 4 column MOLLE panel and easy size adjustment
- Weight: 12.8oz.
- Material: SQUADRON
- Dimensions: L10.5” x H7”
- Please NOTE: Some images display optional accessories that are sold separately. The Mission Configurable Chest Rig (MCCR) comes with a Harness, a waist strap, and MOLLE side flaps only.
- 100% Made in the USA
-
- Holds four (4) MPX magazines
- 2 rows of 6 column MOLLE on exterior
- Quick attach/detach option
- Internal dividers creating four separate magazine pockets
- Adjustable shock cord retainer with webbing pull tab
- SwiftClip® attachment system
- Weight: 5.76oz
- Material: 500D Cordura Nylon
- 100% made in the USA
- Holds four (4) MPX (or similar sized) magazines
- 2 rows of 6 column MOLLE on exterior
- Quick attach/detach option
- Internal dividers creating four (4)separate magazine pockets
- Adjustable shock cord retainer with webbing pull tab
- SwiftClip® attachment system
- Weight: 5.7oz
- Material: 500D Cordura Nylon
- 100% Made in the USA
-
- Modular, lightweight, and versatile
- Accessory options including, 8 different magazine inserts, 2 radio inserts, MOLLE Side Flaps, a Kangaroo Zipper Top, and a Lower Abdomen Pouch
- 5 rows of 6 column MOLLE
- Kangaroo pouch for magazine inserts or the Kangaroo Zipper Top
- Built-in map pocket
- Side envelops pockets to add radio inserts or MOLLE side flaps
- Bottom envelope pocket to add a Lower Abdomen Pouch
- Weight: 6.8oz.
- Material: SQUADRON
- Dimensions: L10.5"xH7"
- 100% Made in the USA
- Please NOTE: Some images display optional accessories that are sold separately. The Mission Configurable Placard (MCP) comes with MOLLE side
-
- Low-Visibility Stealth Trauma Aid Minimalist Pack
- Hooks directly to duty belt with IWB belt loop connectors
- Moisture resistant, lightweight
- Shock cord pull tabs for access to contents
- Center flap with hook and loop closure
- Optional Public Access Individual Bleeding Control Kit
- Material: pack cloth, 4” elastic, fiber-filled padding, and an air mesh interior
- Dimensions (WxHxD): 8 .5"x 4"(flaps folded down) x 3/8”empty
-
- Allows you to carry two additional magazines horizontally on the lower back for easy access
- VELCRO® brand fasteners are used to attach pouch to base of a pack or carrier on the bottom of the envelop
- Can be used in conjunction with Jacket Stash Pocket or by itself
- Fits the vests and carriers that have VELCRO® brand closure on bottom of plate pocket with the exception of the SCARAB and the APC
- 100% Made in the USA
-
- Holds two 5.56 magazines, or similar sized magazine
- Adjustable shock cord retention system
- Helium Whisper® style attachment
- Button hole on bottom for drainage
- 100% Made in the USA
-
- Three viewable surfaces
- Flap viewable on both sides and the base
- Weighs less than 2oz.
- 100% Made in the USA
-
- Holds one 5.56 magazine, or similar sized magazine
- Adjustable shock cord retention system
- Helium Whisper® style attachment
- Button hole on bottom for drainage
- 100% Made in the USA
-
- Small general utility envelope style pouch
- Dimensions 5"H x 5"W x 1.25"D
- Helium Whisper® style attachment
- Weight: 1.8 oz.
- 100% Made in the USA
-
- 7" by 7"
- Two pockets separated by Internal divider
- Grommets at the top for retention lines
- Loop front face for flag, ID, etc.
- Helium Whisper® style attachment
- Extremely light, weight: 2.8 oz.
- 100% Made in the USA
- Color: Coyote Brown
-
- Sleek and clean look
- Mesh lining
- Quarter flaps and placards sold separately
- S/M LEPC fits size Small, Medium and 10"x12" sized plates up to 1.2" thick and below
- L/XL LEPC fits Large and X-Large plates up to 1.2" thick and below
- Holds SAPI, Shooter, and Swimmer Plates
- Armor/Plates Sold Separately
- Three Cummerbund Options: Low-Profile Elastic (CBN1), Low-Profile Elastic With Dividers (CBN1D) & Standard MOLLE, Plate Pocket (CBN3)
- 100% Made in the USA
-
- Holds Motorola SABER Radio or similar sized radio
- Shock cord retainer with small ITW Nexus quick release buckle
- Grommet on bottom for drainage
- Helium Whisper® style attachment
- Weight: 2.5 oz. (0.07 kg)
- 100% Made in the USA
-
- Adjustable
- 11" x 6.5" Placard
- 3 rows of 6 column MOLLE webbing
- SwiftClip® attachment system
- 100% Made in the USA
-
- Holds one pistol magazine
- Adjustable shock cord retention system
- Helium Whisper® style attachment
- Button hole on bottom for drainage
- 100% Made in the USA
-
Length: 9.5″FITS THE FOLLOWING:Crye JPC Kangaroo PouchFerro Concepts Kangaroo PouchVelocity Systems Kangaroo PouchHaley Strategic D3Micro Kangaroo PouchDOES NOT FIT:Spiritus Systems Micro Flight(GHIDORAH-S 556 will fit this, release date TBD)We developed this project specifically for Velocity Systems kangaroo pouches. We realize we could design it in a way to support other kangaroo pouch systems.
-
- Allows complete removal of Cummerbund, when used in conjunction with chest rig
- Side connection points for a chest rig
- 100% Made in the USA
-
Out of stock
- Allows auxiliary equipment to swiftly clip on or off your base component
- Accept any items with an ITW 1" male side release buckle
- 100% Made in the USA
-
Out of stock
- Designed for patrolling situations where armor is not needed
- Front center zip for ease of doffing and donning
- Mesh back panel sized for a 3-litre water bladder
- Adjustable height and girth via ITW G-Hooks and shock cord
- Feature one-wrap VELCRO® Brand for cable management
- 100% Made in the USA
-
Out of stock
- Carries M4 type PMAGS, 7.62x51 PMAGS and AK PMAGS
- Two large general-purpose pouches
- Center zipper closure
- Comes with our ULTRAcomp 2” H-Harness
- Material: Squadron
- All buckles are ITW-Nexus
- 100% Made in the USA
-
Out of stock
- Fourteen laser cut PALS columns for attaching the necessary pouches
- Three-inch wide laser cut h-harness
- Weighs only 12 ounces
- Compatible with our plate carriers that feature the SwiftClip® attachment points
- 100% made in the USA
-
Out of stock
- Designed to be used in conjunction with any of our chest rigs
- Internal plate pocket and separate hydration bladder pocket
- VELCRO® Brand closure
- 6 rows of molle webbing
- ULTRAcomp 3” shoulder straps
- Adjustable side 1” webbing straps
- Plate Sleeve and Chest Rig sold separately
- The hydration bladder pocket was designed to carry a 50-70oz water bladder
- Dimensions: W10” x L15”
- 100% Made in the USA
-
Out of stock
- Allows a helmet to be attached to the back of the Pusher Back Panel and 30L Summit Pack when it is not being used
- G Hooks on the top of the helmet carrier
- Cut out for IFF devices, strobes, V lights or related accessories
- 100% Made in the USA
-
Out of stock
- Carries 4ea 5.56mm mags, 2 pistol mags, up to 2 small radios
- Two GP pockets
- ITW-Nexus side release buckles
- Designed to mount to front of any of our Armor Carriers
- Dimensions:13”x3.5”x8”
- Built in map pocket with a VELCRO® Brand closure
- 100% Made in the USA
-
Out of stock
- Holds (2) sets of handcuffs separated by an internal divider
- Helium Whisper® style attachment
- Weight: 2.0 oz.
- 100% Made in the USA
-
Out of stock
- Holds mini-flashbang grenade (CTS 7290M Mini-Bang)
- H5" x W2" x D1.5"
- Grommet on the bottom for drainage
- Helium Whisper® style attachment
- Weighs 1.0 oz.
- 100% Made in the USA
-
- Holds four MP7 40 round magazines
- Adjustable shock cord retention system
- Weighs only 5.4oz (0.15kg)
- Helium Whisper® style attachment
- 100% Made in the USA
-
- Holds four M4 or similar sized magazines
- Adjustable shock cord retention system
- Helium Whisper® style attachment
- 100% Made in the USA
-
Out of stock
- Holds three HK417 20 round magazines, or similar sized magazines
- Adjustable shock cord retention system
- Helium Whisper® style attachment
- 100% Made in the USA
-
Hard Armor: Size small holds small ESAPI shape plates ONLY. Size medium, large, and x-large hold 10"x12" Shooters/Swimmers cut plates or ESAPI shape plates of corresponding sizes to the carrier. Soft Armor: The soft armor inserts intended for this carrier are the Velocity Systems LPAC/LPAAC Cut Soft Armor. This is a custom cut of soft armor designed for this carrier. Other manufacturers' soft armor may not fit correctly, contact us to inquire about fitting if using other soft armor.
- Armor/Plates Sold Separately
- Front kangaroo pouch
- Two Cummerbund Options: Low-Profile Elastic (CBN1) & Standard MOLLE, Plate Pocket (CBN3)
- Quarter flaps, front flaps and placards sold separately
- 100% Made in the USA
-
Includes:
- (1) SCARAB™ LT Carrier Front and Rear
- (1) Set of ULTRAcomp™ Shoulder Straps & Stretch Padded Sleeves
- (1) Front Flap
- (1) Set of Quarter Flaps
- (1) Zip-On Back Panel
- (4) Size Appropriate Cummerbunds to configure Front or Quarter flap entry
-
- Carries minimum amount of kit for short duration missions
- Carries 50-70oz water bladders
- Upper zipper pouch holds SOCOM issued NVG protective insert
- Removable medical pouch
- Attachment: PALS compatible Helium Whisper® system
- 100% Made in the USA
-
Out of stock
- Measures 8' by 6' 8"
- Camouflage on both sides
- Reinforced button holes around edges every 2' for attachment
- Easily folds for smaller use
- Hood in one corner for use as a personal poncho
- Compacts very small into included 8" by 6" drawstring bag
- Weighs 15oz.
- 100% Made in the USA
-
- Fits in the kangaroo pouch of the SCARAB™ LT, SCARAB™ LE, LEPC, APC, or LPAC
- Holds two 7. 62 magazines
- Weighs only 2 oz.
- 100% made in the USA
-
Out of stock
- Elastic slick design for low profile use
- Two dividers included to provide extra storage for mag, tourniquets and small med kits
- Velcro® Brand One-Wrap® Fingers
- A quantity of (1) is a complete cummerbund with a right and left side
- 100% Made in the USA
-
- Elastic slick design for low profile use
- Two dividers included to provide extra storage for mag, tourniquets and small med kits
- A quantity of (1) is a complete cummerbund with a right and left side
- 100% Made in the USA
-
Out of stock
- Holds six 12-gauge shotgun rounds in elastic loops
- Weighs less than 2 oz.
- Helium Whisper® style attachment
- 100% Made in the USA
-
Out of stock
- Three elastic pockets sized to hold one 5.56 magazine or smaller magazines/tools.
- Adjustable
- SwiftClip® attachment system
- 100% Made in the USA
-
Out of stock
- Smaller, lighter alternative to full chest rig
- Quick attach/detach option
- Holds three 7.62 magazines
- Three general purpose pouches (loop panel on center pouch)
- Adjustable shock cord retainer with webbing pull tab
- SwiftClip® attachment system
- Dimensions: W11” x D3.5” x H6”
- Large Front Center Pocket Dimensions: W3.87” x D1.5” x H4” not including flap closure
- Two Small Front Side Pockets Dimensions: W2.87” x D1.5” x H4” not including flap closure
- 100% Made in the USA
-
Out of stock
- Holds three M4 magazine pouches
- 2 rows of 6 column MOLLE webbing on exterior
- Internal dividers creating three separate magazine pockets
- Adjustable shock cord retainer with webbing pull tab
- SwiftClip® attachment system
- 100% Made in the USA
-
- Four M4 magazine pouches
- 2 rows of 6 column MOLLE on exterior
- Internal dividers creating four separate magazine pockets
- Adjustable shock cord retainer with webbing pull tab
- 12" x 6.5"
- SwiftClip® attachment system
- 100% Made in the USA
-
- Three 7.62 magazine pouches
- 2 rows of 6 column MOLLE webbing on exterior
- Internal dividers creating three separate magazine pockets
- Adjustable shock cord retainer with webbing pull tab
- SwiftClip® attachment system
- 100% Made in the USA
-
Out of stock
- Three HK417 magazine pouches with a MOLLE exterior
- Internal dividers creating four separate magazine pockets
- Adjustable shock cord retainer with webbing pull tab
- SwiftClip® attachment system
- 100% Made in the USA
-
Out of stock
- Low profile, light weight general purpose chest rig
- Carries four 5.56mm magazines (6.8mm or similar sized)
- Three general purpose pouches
- Three rows of PALS webbing on sides of chest rig
- Built in map pocket with a VELCRO® Brand closure
- Loops to route antennas, wires and hydration bladder tubing
- Four one inch ITW-Nexus side release buckles
- Designed to mount to front of Low-Profile Armor Carrier
- Comes with our Standard H-Harness but is now being offer with the option of our ULTRAcomp 2" H-Harness or our ULTRAcomp 3" H-Harness
- 100% Made in the USA
-
Out of stock
- Carries 4ea 5.56mm mags, 2 pistol mags, up to 2 small radios
- Two GP pockets
- Loops to route antennas, wires and hydration bladder tubing
- Four one inch ITW-Nexus side release buckles
- Designed to mount to front of Low-Profile Armor Carrier
- Comes with our Standard H-Harness but is now being offered with the option of our ULTRAcomp 2" H-Harness or our ULTRAcomp 3" H-Harness
- Built in map pocket with a VELCRO® Brand closure
- 100% Made in the USA
-
- 500 denier Cordura Outer
- PALS webbing on front, rear and side exterior
- SwiftClip® Attachment System
- Front and rear plate pockets are accessed externally
- Integrated admin pouch and kangaroo pouch
- Drag handle on upper rear
- Groin protector ready
- Two Cummerbund Options: Low-Profile Elastic (CBN1) & Standard MOLLE, Plate Pocket (CBN3)
- 100% Made in the USA
-
- SC13 setup comprised of SCARAB™ LE front panel, SCARAB™ LT back panel, SCARAB™ LT/LE Cummerbund and removable Front Flap
- Removable Front Flap with three rows of loop MOLLE webbing and integrated flat kangaroo pouch sized to hold our Double HK417, Double 7.62, and Triple 5.56 Magazine Insert
- Admin pouch with two external rows of MOLLE webbing on chest
- Back panel includes six rows of MOLLE webbing, loop on upper rear for ID and accepts Zip-On Back Panel
- SCARAB™ LT/LE Cummerbund - lightweight and breathable with MOLLE webbing on the exterior and interior
- 100% made in the USA
-
- Velocity Systems Fanny Pack consisting of 3 integrated compartments.
- Velcro on frontside for ID/ IFF patches, double zipper closing on main compartments and rear storage which is closed by Velcro. 25x18x10cm dimensions.
- Large Velcro tab for secure connection on your plate carrier.
- Velcro inside large compartment for additional securement.
-
- Fits in the kangaroo pouch of the SCARAB™ LT, SCARAB™ LE, LEPC, APC, or LPAC
- Holds three 5.56 magazines
- Weighs only 2 oz.
- 100% made in the USA
-
The KHARD Medical Insert System is a two-piece insert designed to fit the 30L and 45L Arc’Teryx family of Assault and Khard Packs.
-
- 49lb Rare Earth Magnets used
- Holds through the Chameleon shirt, ULV Carrier, and additional thin clothing over the armor system (ie. fleeces and light jackets)
- Dimensions: 9.5”x.5”x5.75”
- This pouch works with steel plates or the Magnetic Compatibility Insert only
- 100% Made in the USA
-
- 49lb Rare Earth Magnets used
- Holds through the Chameleon shirt, ULV Carrier, and additional thin clothing over the armor system (ie. fleeces and light jackets)
- Dimensions: 9.5”x.5”x5.75”
- This pouch works with steel plates or the Magnetic Compatibility Insert only
- 100% Made in the USA
-
- This insert is for use with the Magnetic Placard, MOLLE Panel and Magnetic Placard, Triple 5.56 Elastic
- Works over fleeces and light jackets
- 100% Made in the USA
-
- Quick on/off pack for sustainment supplies and hydration
- Size of Back Panel corresponds to size of Carrier you purchase
- 100% Made in the USA
-
Out of stock
- Lightweight mission focused
- 24 hour dismounted operations
- Standalone assault pack and MOLLE compatible assault pack
- Sleeve for 2L (50oz.) hydration bladder
- Small cell phone or PDA pocket
- PALS webbing on exterior sides
- All buckles are ITW-Nexus IR
- Dimensions: L16”x W9”x D5”
- Volume: Approximately 10 Liters
- 100% Made in the USA
-
- Holds MBITR AN/PRC-148 or Harris AN/PRC-152 Radio
- Shock cord retainer with Small ITW Nexus quick release buckle
- Grommet at the bottom for drainage
- Helium Whisper® style attachment
- Weight: 2.8 oz.
- 100% Made in the USA
-
- 3.25"L x 1.5"W x 4"H
- Grommet on the bottom for drainage
- Helium Whisper® style attachment
- Weighs only 1.4 oz.
- 100% Made in the USA
-
- Allows you to keep your layering system in an easily accessible location
- VELCRO® brand fasteners are used to attach pocket to base of a pack or carrier on the bottom of the en-velop
- Can be used in conjunction with Horizontal Rear 5.56 Magazine Pouch or by itself
- Fits the vests and carriers that have VELCRO® brand closure on bottom of plate pocket with the exception of the SCARAB and the APC
- 100% Made in the USA
-
- Plate pockets are sized to accommodate Stand-Alone or ICW ESAPI or Swimmer cut plates
- S/M APC fits size Small, Medium and 10"x12" sized plates
- L/XL APC fits Large and X-Large plates
- Armor/Plates Sold Separately
- Three Cummerbund Options: Low-Profile Elastic (CBN1), Low-Profile Elastic With Dividers (CBN1D) & Standard MOLLE, Plate Pocket (CBN3)
- 100% Made in the USA
-
- Holds a CAT tourniquet
- Simple but durable shock cord retainer
- Weighs 0.2 oz. (6 grams)
- 100% Made in the USA
-
- Smaller, lighter alternative to full chest rig
- Quick attach/detach option
- Holds four 5.56 magazines
- Three general purpose pouches (loop panel on center pouch)
- Adjustable shock cord retainer with webbing pull tab
- SwiftClip® attachment system
- Placard Dimensions: W12” x D3.5” x H6.5”
- Large Front Center Pocket Dimensions: W3.87” x D1.5” x H4” not including flap closure
- Two Small Front Side Pockets Dimensions: W2.87” x D1.5” x H4” not including flap closure
- 100% Made in the USA
-
- Patented swivel shoulder straps with D-ring attachments (US Patent No. 9,894,962)
- Narrow ULTRAcomp™ Shoulder Straps
- 100% Made in the USA
- Sized to hold plate of corresponding carrier size, example size large carrier holds size large ESAPI Plates
- Three (3) Cummerbund Options: SCARAB™ LT/LE Cummerbund, Low-Profile Elastic Cummerbund (CBN1) MOLLE, Plate Pocket Cummerbund (CBN3)
-
- Accepts Inner Belts up to 2.5” Wide
- MOLLE loops for attachment of pouches, holsters, etc.
- Padded back for cooling and comfort
- Internal attachment system that can be utilized by our Enhanced Variable Width Riggers Belt
-
- Lightweight, water and abrasion resistant pack cover designed to camouflage or protect your pack from harsh elements
- Easily adjustable drawstring and cord lock closure
- Oval slide fastener at covers base for attachment to 30L Summit Pack
- Single layer and reversible Pack Cover options
- Folds into confined space when not in use, allowing for easy storage and quick access
- Pack Cover made of 70 Denier Ripstop Nylon material
- VS17 Panel sold as accessory
-
- Fills gap between short duration 24HR Assault Pack and full size rucksack
- Internal frame sheet
- Ergonomically shaped aluminum wire frame
- Top loading, PALS panels on the sides
- Top pocket with small electronics pocket and two daisy chains
- Two hip climbing gear attachment loops
- Two top hauling handles
- Internal VELCRO® Brand panels for gear organization and a water bladder pocket
- Webbing on top for attaching crampons of other equipment
- 100% Made in the USA
-
- Used to identify friendly forces, personnel, and equipment
- Can attach to vehicles, rucksacks, hand held or laid out on the ground
- Equipped with tie down loops
- High-visibility fluorescent orange & cerise
- Lightweight, water and abrasion resistant
- VS 17 Panel is made of 200 Denier pack cloth
- Folds into confined space when not in use, allowing for easy storage and quick access
- Color: Fluorescent Orange and Cerise
- Approximate Dimensions: Small: L24”x W24” | Medium: L31”x W10” | Large: L70”x W20”
-
Out of stock
Limited Run - MultiCam and MultiCam Black Velocity Systems Hats.
-
- Modern Rugby Style Collar
- Two Envelope Pockets on the Sleeves
- Loop on Sleeve Pockets
- Highly Breathable
- Enhanced wicking chemistry
- Soil Release Treatment
- Built In UV Protection - UVA: 97.98%, UVB: 98.84%
- Dynamic Stretch and Recovery
- Odorexx™ Antimicrobial
- Non-chafing Heat Seal Tagless Label
- 83% Nylon 17% Spandex
- 100% Made in the USA
-
- Sleeve Option: Plain or Envelope Pockets
- Modern Rugby Style Collar
- Highly Breathable
- Enhanced wicking chemistry
- Soil Release Treatment
- Built In UV Protection - UVA: 97.98%, UVB: 89.84%
- Dynamic Stretch and Recovery
- Odorexx™ Antimicrobial
- Non-chafing Heat Seal Tagless Label
- 83% Nylon 17% Spandex
- 100% Made in the USA
-
The Helium Whisper® Micro Diddie Pouch is a small diddie bag or SSE pouch that can be very compactly stored when not in use. The bag measures 8.75” x 9.5” with a shock cord lined opening and cord lock synch. The entire bag rolls or stuffs into attached elastic pocket to stow when not in use. A webbing pull tab at the bottom allows for easy and quick deployment.
-
The Helium Whisper® Medical Pouch has internal elastic webbing for organization and YKK Zipper closure with quiet Chums zipper pulls.
