-
Heavy-duty steel sling clip allows for quick attachment and removal of a tactical sling. Fits any long gun with a grommet or ring-type sling attachment point that accepts an HK-style hook -
Out of stock
Optional QD lever for FAST Micro Mounts. FAST Magnifier Mount Series comes with this lever pre-installed. Not compatible FAST Optic Riser.
-
The Link is a brainchild rifle sling between ANR Design LLC and Cole-Tac. The Link Sling is a 1″ webbing design rifle sling, stitched with Mil-Spec bonded Nylon thread. Mounted on the rifle, the forward section of the Link rifle sling has a 40″ length of pull, fully extended. The rear adjustment of the Link rifle sling has a 30″ total length of pull. Depending on the operator’s size, the length of pull easily allows plenty of slack to transfer the weapon system to the opposite shoulder of even the largest of end-users. The Link rifle sling is Berry Compliant and constructed of 100% US materials, assembled in New Hampshire and South Dakota at Cole-Tac facilities.
-
WEIGHT 0.2 lbs DIMENSIONS 2 × 1.3 × 2 in COLOR Black, FDE* * “FDE” is used throughout our catalog to reference a spectrum of colors that include tan, brown, bronze, earth, and everything in between. Due to the chemical process that takes place during Type III Hardcoat, the final finish can vary from part to part (even parts done in the same batch). Therefore, your “FDE” product may vary from other parts from UNITY and other companies, and may vary from the photos shown online. -
Out of stock
The ST-MCX is a robust and unobtrusive sling mount for your MCX lower receiver.
-
Breakaway Elastic Retention System – B.E.R.S. is a product that was designed for operators that did not want an active retention holster; that could be run as a level 1. You can simply stow the elastic behind the holster when not in use. It has a velcro interlock that can be broken by a sharp draw of the gun. This is a very niche product that was developed for a specific purpose and use. It is currently in use by the USN, and UK SOF.
-
TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one point command and control system for all weapon-mounted electronics. It provides low profile, dual-device control for lights and lasers. TAPS allows placement of weapon accessories in optimal location while providing a single point of actuation of the operator’s choosing. Rather than needing to place both light and laser where they can be activated directly, or needing to find places for multiple remote pressure pads while securing loose cables, TAPS literally places control at the operator’s fingertips in a single, user-friendly package.
-
+Multifunctional tripod, bipod monopod/trekking pole & shelter support system +Rapid transition between rifl es, optics, cameras & accessory equipment + Smooth and stable 360-degree traverse + Friction controlled elevation, depression and cant adjustment + Detachable legs for use as trekking poles + Folding hook to mount extra ballast weight to aid stability + Serviceable feet, covering rubber boots over tungsten carbide tips
-
Out of stock
TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one point command and control system for all weapon-mounted electronics. It provides low profile, dual-device control for lights and lasers. TAPS mounts directly to any industry standard rail, including M1913 Picatinny, KEYMOD, and M-LOK. No third party rail adapters are needed, keeping the weapon lighter and sleeker. It features two on-board buttons and two accessory leads. Available in 4 button configurations, TAPS SYNC utilizes a patented double pole dome switch to fire both devices simultaneously on isolated circuits to protect your devices. Meets MIL-STD-801G(1)-512.6
-
ANVL UKON is a micro Trijicon RMR rifle mount that incorporates a single focal plane absolute co-witness backup iron sight package.
-
INT DIMENSION MM. L1135 W340 D70
-
Features: Pull-loop making backpack extrication even easier Available in easy-to-see colors or camouflage Keeps gear flat when in use Fits up to 200 rounds 223rem
-
DIMENSIONS: 3.12″(L) x 1.01″(W) x 1.58″(H) WEIGHT: 3.2 oz. MATERIAL: 7075-T6 Aluminum COATING: Type III Hardcoat Anodized MOUNT TYPE: Rail Grabber or QD Lever (sold separately) COMPATIBILITY: (Direct) Aimpoint CompM4, Comp M4s, (w/ Aimpoint 30mm Top Ring P/N 12194) Aimpoint PRO, ACO, CompM3, CompML3, CompM2, CompML2 *NOTE* “FDE” is used throughout our catalog to reference a spectrum of colors that include tan, brown, bronze, earth, and everything in between. Due to the chemical process that takes place during Type III Hardcoat, the final finish can vary from part to part (even parts done in the same batch). Therefore, your “FDE” product may vary from other parts from UNITY and other companies, and may vary from the photos shown online.
-
DIMENSIONS: 2.08″(L) x 1.20″(W) x 1.81″(H) WEIGHT: 3.2 oz. MATERIAL: 7075-T6 Aluminum COATING: Type III Hardcoat Anodized MOUNT TYPE: Rail Grabber or QD Lever (sold separately) COMPATIBILITY: Trijicon MRO, MRO-HD *NOTE* “FDE” is used throughout our catalog to reference a spectrum of colors that include tan, brown, bronze, earth, and everything in between. Due to the chemical process that takes place during Type III Hardcoat, the final finish can vary from part to part (even parts done in the same batch). Therefore, your “FDE” product may vary from other parts from UNITY and other companies, and may vary from the photos shown online.
-
DIMENSIONS: 2.25″(L) x 2.64″(W) x 3.42″(H) WEIGHT: 4.4 oz. MATERIAL: 7075-T6 Aluminum COATING: Type III Hardcoat Anodized MOUNT TYPE: QD Lever COMPATIBILITY: EOTech G23, G30, G33, G43, G45 Vortex Optics VMX-3T, Micro3X, Micro6X Trijicon 3X MAG-C Sig Sauer Juliet3X, Juliet4X, Juliet Micro3X
-
Spare Rubber Boots for your Javelin bipod, Sentinel and Ascent tripods.
- Sold in a pack of three
-
Set of three replacement feet for Javelin bipods, Valhalla bipods, Sentinel and Ascent tripods.
-
- CNC machined from 7075-T7351 aluminium billet with a hard-anodised black finish
-
Enables use of our Javelin Bipod in fixed target and traversable hunting modes
- Compatible with hunting rifles that use a standard removable sling swivel stud
-
Secure sling attachment
-
Ferritic stainless steel screws for installation of our Classic Rifle Adapter. M5/METRIC 20mm, 23mm & 27mm UNF/IMPERIAL 1/2", 5/8", 10/32", 7/8", 1" & 1/32" Wood Screw M5.7 x 20mm
-
Built from mil-spec webbing, this is a no nonsense piece of gear that does one thing well. It keeps your Javelin bipod on your belt, within reach, ready for action. The bipod sits securely in the webbing loop, and we've added an elastic bungee to keep it from bouncing around.
- Weighs just 20g / 0.6oz
- Designed by our friends at RedKettle
-
Pack of three claw feet. Make sure your bipod or tripod doesn’t slip in difficult weather conditions. A pack of three claw feet will provide extra grip and support.
-
-
Simple, strong fixed height legs, available in three heights
-
Made from 7075 hard anodised aluminium and high quality carbon fibre for lightweight, corrosion resistance and strength
-
Durable tungsten carbide tips with tethered synthetic boots to enhance grip on all terrains
-
-
-
Lightweight, simple and reliable twist lock Pro Legs for easy height adjustment and flexibility in varying terrain
- Durable tungsten carbide tips with tethered synthetic boots to enhance grip on all terrains
-
Made from 7075 hard anodised aluminium and high-quality carbon fibre for lightweight, corrosion resistance and strength
-
-
-
Spring-assisted height adjustment
-
Durable tungsten carbide tips with tethered synthetic boots to enhance grip on all terrains
-
Made from 7075 hard anodised aluminium and high quality carbon fibre for lightweight, corrosion resistance and strength
-
-
Thanks to its magnetised fitting, the Quick Shot Rest attaches to the Spartan tripods or Davros head quickly and easily. It functions like a traditional gun rest, allowing you to take aim from any position. The design incorporates a tactile rubber finish, holding your rifle securely.
Weight 35g / 1.2oz -
-
CNC machined from 6061 aluminium with a hard-anodised black finish
-
Three 3/8”-16 threaded holes and four 1/4”-20 threaded holes for mounting attachments to the clamp
-
Fine and coarse control adjustment knobs
-
-
Designed to work in conjunction with the Spartan Davros and Phone Holder, The Mr G Clamp is a true game-changer, supporting your rifle and optics in almost any situation. The Mr G clamp can be used in High seats, Tree Stands, Hides, as well as on cars or buggies. You won’t leave without your Mr G Clamp. A go-anywhere support tool for your rifle and optics that will clamp to just about anything. Please note: Davros head not included.
-
-
CNC machined from 7075-T7351 aluminium billet with a hard-anodised black finish
-
Compatible with all Spartan Classic adapters
-
Fits most third-party Arca compatible ball and pan heads
Weight 30g / 1.1oz Attachment Spartan Classic Adapters -
-
Out of stock
-
CNC machined from 7075-T7351 aluminium billet with a hard-anodised black finish
-
Enables use of our Javelin Bipod in fixed target and traversable hunting modes
-
Brass option available, weighing just 23 grams
Gunsmith Brass Gunsmith Weight 9g / 0.3oz 23g / 0.8oz Compatibility Javelin Lite, Pro Hunt, Pro Hunt Tac, Sentinel and Ascent Javelin Lite, Pro Hunt, Pro Hunt Tac, Sentinel and Ascent -
-
The Valhalla M-Lok adapter enables our Valhalla Bipod to be attached and detached to rifles with genuine M-Lok accessory rails.
- Weighs just 38 grams / 1.3oz
- CNC machined from 7075-T7351 aluminium billet with a hard-anodised finish
