-
Out of stock
The ST-MCX is a robust and unobtrusive sling mount for your MCX lower receiver. -
Using our custom pistol Mag Carrier, comfortably carry your backup magazines.
-
- Used to identify friendly forces, personnel, and equipment
- Can attach to vehicles, rucksacks, hand held or laid out on the ground
- Equipped with tie down loops
- High-visibility fluorescent orange & cerise
- Lightweight, water and abrasion resistant
- VS 17 Panel is made of 200 Denier pack cloth
- Folds into confined space when not in use, allowing for easy storage and quick access
- Color: Fluorescent Orange and Cerise
- Approximate Dimensions: Small: L24”x W24” | Medium: L31”x W10” | Large: L70”x W20”
-
JUGGERNAUT IS NOT RESPONSIBLE FOR REPLACEMENTS DUE TO INSTALLATION MISTAKES - PLEASE FOLLOW INSTRUCTIONS CAREFULLY.
- Available in standard, blue light filter technology or two-way privacy* protection
- Absorbs impact without cracking
- Triple layered synthetic material with 9H hardness rating
- Has the look and feel of glass
- Shatterproof technology and helps minimize chips and cracks (minor scratches are normal wear & tear)
- Blue light version blocks up to 43% of blue light from digital devices
- Privacy version obscures your screen when viewed from the side
- Includes alcohol cleaning wipe, microfiber cleaning cloth, dust stickers and instructions
- Available models: Galaxy S22, S22+, S22 Ultra
- Compatible with ENDVR, ADVNTR and OPRTR cases
-
SPECS
- 3.75 to 4.25 ounces depending on size
- Approximately 4" x 4.5" x 1.5" depending on size
- Not applicable
- 4202122120
- USA
-
The ADVNTR is an evolution of our IMPCT model. We compiled all the feedback from extreme sportsmen, law enforcement, federal agencies, and first responders into a new design engineered to offer superior drop protection and mounting capability with additional grip and no loose components.
- Fits Samsung Galaxy S22
- Designed for devices that are already IP68 rated
- Top load with secure latch
- Screen protector compatible with Juggernaut SHLD
- Lanyard attachment points
- Fits size Medium mounts
-
Performance may vary depending on device load. Some applications may consume power faster than the recharge rate. Please see list of compatible devices/case models listed below the description.
-
- Same rugged design/materials as legacy Juggernaut.Case products
- Interfaces with Garmin style K-Edge mount adapters (not included) See compatible mounts below.
- Rotate to lock interface
- Bike handlebar phone mount for road bikes, mountain bikes or e-bikes
-
Breakaway Elastic Retention System – B.E.R.S. is a product that was designed for operators that did not want an active retention holster; that could be run as a level 1. You can simply stow the elastic behind the holster when not in use. It has a velcro interlock that can be broken by a sharp draw of the gun. This is a very niche product that was developed for a specific purpose and use. It is currently in use by the USN, and UK SOF.
-
The Ridgeline Drop Offset, Pouch (DrOP) was originally designed to increase Operator comfort by moving belt mounted magazine pouches lower and slightly offset, to clear body armor and provide a less impinged range of motion during reloads. Designed and manufactured in the USA, the DrOP mounts to the belt using TekLok style attachments, and is compatible with most pouch types (ANR, TYR, HSGI, ESSTAC, GCODE, etc. ) or any Kydex utilizing a TekLok Pattern.
-
- Allows you to carry two additional magazines horizontally on the lower back for easy access
- VELCRO® brand fasteners are used to attach pouch to base of a pack or carrier on the bottom of the envelop
- Can be used in conjunction with Jacket Stash Pocket or by itself
- Fits the vests and carriers that have VELCRO® brand closure on bottom of plate pocket with the exception of the SCARAB and the APC
- 100% Made in the USA
-
- Three viewable surfaces
- Flap viewable on both sides and the base
- Weighs less than 2oz.
- 100% Made in the USA
-
- 7" by 7"
- Two pockets separated by Internal divider
- Grommets at the top for retention lines
- Loop front face for flag, ID, etc.
- Helium Whisper® style attachment
- Extremely light, weight: 2.8 oz.
- 100% Made in the USA
- Color: Coyote Brown
-
- Holds Motorola SABER Radio or similar sized radio
- Shock cord retainer with small ITW Nexus quick release buckle
- Grommet on bottom for drainage
- Helium Whisper® style attachment
- Weight: 2.5 oz. (0.07 kg)
- 100% Made in the USA
-
- Adjustable
- 11" x 6.5" Placard
- 3 rows of 6 column MOLLE webbing
- SwiftClip® attachment system
- 100% Made in the USA
-
- Sizes are device specific (check the product page of your tablet case)
- Tabs hook securely into any 3 row by 6 column area of MOLLE
- Bungee cord for extra retention
- Adjustable hinge friction
- Folds flush or rotates open to max of 135 degree angle
- Designed, engineered and packaged in the USA from global components
-
TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one point command and control system for all weapon-mounted electronics. It provides low profile, dual-device control for lights and lasers. TAPS allows placement of weapon accessories in optimal location while providing a single point of actuation of the operator’s choosing. Rather than needing to place both light and laser where they can be activated directly, or needing to find places for multiple remote pressure pads while securing loose cables, TAPS literally places control at the operator’s fingertips in a single, user-friendly package.
-
The Cheat Sheet from Cole-TAC is the perfect way to keep your data in view when you need it.
-
Out of stock
- Allows a helmet to be attached to the back of the Pusher Back Panel and 30L Summit Pack when it is not being used
- G Hooks on the top of the helmet carrier
- Cut out for IFF devices, strobes, V lights or related accessories
- 100% Made in the USA
-
- Holds four M4 or similar sized magazines
- Adjustable shock cord retention system
- Helium Whisper® style attachment
- 100% Made in the USA
-
- Carries minimum amount of kit for short duration missions
- Carries 50-70oz water bladders
- Upper zipper pouch holds SOCOM issued NVG protective insert
- Removable medical pouch
- Attachment: PALS compatible Helium Whisper® system
- 100% Made in the USA
-
Out of stock
- Measures 8' by 6' 8"
- Camouflage on both sides
- Reinforced button holes around edges every 2' for attachment
- Easily folds for smaller use
- Hood in one corner for use as a personal poncho
- Compacts very small into included 8" by 6" drawstring bag
- Weighs 15oz.
- 100% Made in the USA
-
Out of stock
- Elastic slick design for low profile use
- Two dividers included to provide extra storage for mag, tourniquets and small med kits
- Velcro® Brand One-Wrap® Fingers
- A quantity of (1) is a complete cummerbund with a right and left side
- 100% Made in the USA
-
- Fits iPhone XR
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
-
- Fits iPhone 11 Pro Max – does not fit 11 or 11 Pro
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size LARGE (5.5) mounts
-
Galaxy S9
- Fits Samsung Galaxy S9 (SM-G960A) – standard size, not plus
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
- Fits Samsung Galaxy S9+ (PLUS)
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
- NSN# 8115-01-672-6050 (FDE)
-
Out of stock
GALAXY S8
- Fits Samsung Galaxy S8 (SM-G950A) – standard size, not plus
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
- Fits Samsung Galaxy S8+ (PLUS)
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
-
- Fits Galaxy S20+ (PLUS) – does not fit standard 20, S20 FE, 20 Ultra or Note 20
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
-
Out of stock
- Easily molded to fit most fractures
- Both lightweight and strong
- Waterproof, Reusable, Easy to clean, Compact
- Impervious to environmental extremes
-
Out of stock
- Rugged needle/catheter protective tube
- Easy ID textured twist top with handy clip
- Easy-open container for quick access
- Capless flash chamber for immediate confirmation of needle placement
- Convenient, compact size
- U.S. Patents D595,847 and 001002372-0001, Patent(s) Pending
