- Smith patented Regulator ventilates lenses combat fogging
- Fits like an eyeshield with protection of a goggle
- Anti-fog and scratch resistant coating on all lenses
- Lenses meet US MIL-DTL-43511D goggle impact level clause 3.5.1
- Smith's uncompromising optical quality
- 1% protection from UVA/B/C rays
-
-
Vision
- Anti-fog and scratch resistant coating on all lenses
- 100% UVA/B protection
- Super thin, moldable alloy temples fit cleanly under ear protection without breaking the seal
- Adjustable nose piece for a perfect fit
- PivLock™ interchangeable lens system makes lens changes easy
- Clear lens and gray MilSpec lenses
-
Out of stock
- Low profile, light weight general purpose chest rig
- Carries four 5.56mm magazines (6.8mm or similar sized)
- Three general purpose pouches
- Three rows of PALS webbing on sides of chest rig
- Built in map pocket with a VELCRO® Brand closure
- Loops to route antennas, wires and hydration bladder tubing
- Four one inch ITW-Nexus side release buckles
- Designed to mount to front of Low-Profile Armor Carrier
- Comes with our Standard H-Harness but is now being offer with the option of our ULTRAcomp 2" H-Harness or our ULTRAcomp 3" H-Harness
- 100% Made in the USA
-
Out of stock
- Carries 4ea 5.56mm mags, 2 pistol mags, up to 2 small radios
- Two GP pockets
- Loops to route antennas, wires and hydration bladder tubing
- Four one inch ITW-Nexus side release buckles
- Designed to mount to front of Low-Profile Armor Carrier
- Comes with our Standard H-Harness but is now being offered with the option of our ULTRAcomp 2" H-Harness or our ULTRAcomp 3" H-Harness
- Built in map pocket with a VELCRO® Brand closure
- 100% Made in the USA
-
Vision
- Anti-fog and scratch-resistant coating on all lenses
- 100% UVA/B protection
- Available in Asia fit
- Compatible with Smith Rx system insert (sold separately)
- PivLock™ interchangeable lens system makes lens changes easy
- Clear lens and gray MilSpec lenses
-
- 500 denier Cordura Outer
- PALS webbing on front, rear and side exterior
- SwiftClip® Attachment System
- Front and rear plate pockets are accessed externally
- Integrated admin pouch and kangaroo pouch
- Drag handle on upper rear
- Groin protector ready
- Two Cummerbund Options: Low-Profile Elastic (CBN1) & Standard MOLLE, Plate Pocket (CBN3)
- 100% Made in the USA
-
- SC13 setup comprised of SCARAB™ LE front panel, SCARAB™ LT back panel, SCARAB™ LT/LE Cummerbund and removable Front Flap
- Removable Front Flap with three rows of loop MOLLE webbing and integrated flat kangaroo pouch sized to hold our Double HK417, Double 7.62, and Triple 5.56 Magazine Insert
- Admin pouch with two external rows of MOLLE webbing on chest
- Back panel includes six rows of MOLLE webbing, loop on upper rear for ID and accepts Zip-On Back Panel
- SCARAB™ LT/LE Cummerbund - lightweight and breathable with MOLLE webbing on the exterior and interior
- 100% made in the USA
-
- Velocity Systems Fanny Pack consisting of 3 integrated compartments.
- Velcro on frontside for ID/ IFF patches, double zipper closing on main compartments and rear storage which is closed by Velcro. 25x18x10cm dimensions.
- Large Velcro tab for secure connection on your plate carrier.
- Velcro inside large compartment for additional securement.
-
IFF cordura/ IR patch in multicam To be worn on helmet or shoulder Velcro patch for friendly forces identification purposes (Size 9×5 cm)
-
Out of stock
- Designed for use with Team Wendy's EXFIL® Ballistic or EXFIL® Ballistic SL with the EXFIL® Rail 3.0 only
- Material: Nylon/spandex stretch fabric across the top, polyester mesh sides
- Easy installation and removal via hook/loop attachment allows rapid change of helmet pattern, no tools required
- Close fitting cover creates a secure fit to the shell that also protects the helmet finish
- Loop patches on the cover attach gear or patches to the outside of the helmet and feature slots to provide better cable management
- Berry Compliant
-
Out of stock
- Designed for use with Team Wendy's EXFIL® Ballistic with the EXFIL® Rail 2.0 only
- Material: Nylon/spandex stretch fabric across the top, polyester mesh sides
- Easy installation and removal via hook/loop attachment allows rapid change of helmet pattern, no tools required
- Close fitting cover creates a secure fit to the shell that also protects the helmet finish
- Loop patches on the cover attach gear or patches to the outside of the helmet and feature slots to provide better cable management
- Berry Compliant
-
Out of stock
PERFORMANCE BALLISTIC PERFORMANCE NIJ Level III-A (according to NIJ STD 0106.01/0108.01) SIZING One size fits all sizes of both the EXFIL® Ballistic and EXFIL® Ballistic SL helmets. Compatible with both the EXFIL® Rail 2.0 and the EXFIL® Rail 3.0.
-
Out of stock
- This counterweight kit adds weight to the rear of the helmet to compensate for night vision and other front-mounted devices, improving stability and reducing neck fatigue.
- Attaches with hook/loop and is additionally secured to side rails with included webbing (EXFIL® Ballistic) or shock cord (EXFIL® SAR)
- Customizable kit available in two sizes:
- Small: Adjustable up to 0.75 lbs. using three (3) 0.25 lb. weights
- Large: Adjustable up to 1.5 lbs. using three (3) 0.5 lb. weights
- Includes fully-coated lead weights
-
Out of stock
Adapter allows for tool-free attachment of the Ops-Core AMP™ Communication Headset to the EXFIL® Rail 2.0 and the EXFIL® Rail 3.0 accessory rail systems. A press fit design – rather than a hard mount – ensures breakaway functionality when enough pressure is applied in an emergency situation. Contents:
- Two (2) EXFIL® Adapters for the Ops-Core AMP™ Communication Headset
- One (1) T10 Torx Driver
- Installation Instructions
-
Out of stock
- Works with all Peltor™ COMTAC systems and a variety of other brands and models
- Eliminates rigid metal headband, providing better fit and comfort
- Tool-free attachment directly to the quick release slot on the EXFIL® Rail 2.0, EXFIL® Rail 3.0, EXFIL® SAR Rail and M-216™ Rail systems
- Open and closed positions allow quick donning and doffing of helmet
- Wiring is easily routed in or outside the helmet shell
- Kit includes one boom microphone adapter
-
Out of stock
The EXFIL® Peltor™ quick release adapter back plate set allows you to convert a Peltor™ helmet mounting system for installation onto the Team Wendy EXFIL® Rail 2.0, EXFIL® Rail 3.0, EXFIL® SAR Rail and M-216™ Rail systems. Once converted this system allows for tool-free attachment of all Peltor™ COMTAC systems to Team Wendy rail systems.
-
- Fits in the kangaroo pouch of the SCARAB™ LT, SCARAB™ LE, LEPC, APC, or LPAC
- Holds three 5.56 magazines
- Weighs only 2 oz.
- 100% made in the USA
-
PERFORMANCE Impact Performance Meets impact attenuation requirements for: ASTM F2040-18 (Recreational Snow Sports) BS EN 1077:2007 Class B (Alpine Skiing and Snowboarding)
-
PERFORMANCE
- Meets the requirements of BS EN 12492:2012 standard for mountaineering helmets
- Meets the requirements of BS EN 1385:2012 standard for whitewater helmets
- Meets additional off-crown impact requirements of BS EN 14052:2012 European standard for high performance industrial helmets NOTE: EN 14052 requires a low-strength chinstrap, the EXFIL® SAR is not fully certified to BS EN 14052:2012 in order to meet more rigorous chinstrap requirements of BS EN 12492:2012 and reduce the risk of losing the helmet during a fall.
- Meets Advanced Combat Helmet (ACH) Blunt Impact Protection requirements (per AR/PD 10-02 Rev A)
-
PERFORMANCE
- Meets the requirements of BS EN 12492:2012 standard for mountaineering helmets
- Meets the requirements of BS EN 1385:2012 standard for whitewater helmets
- Meets additional off-crown impact requirements of BS EN 14052:2012 European standard for high performance industrial helmets NOTE: EN 14052 requires a low-strength chinstrap, the EXFIL® SAR is not fully certified to BS EN 14052:2012 in order to meet more rigorous chinstrap requirements of BS EN 12492:2012 and reduce the risk of losing the helmet during a fall.
- Meets Advanced Combat Helmet (ACH) Blunt Impact Protection requirements (per AR/PD 10-02 Rev A)
-
PERFORMANCE Independently tested to meet all performance requirements of BS EN 1385:2012 standard for whitewater helmets. ACCESSORY RAIL
-
-
PERFORMANCE Ballistic Performance NIJ Level III-A (according to NIJ STD 0106.01/0108.01) Fragment Performance 17gr V50 ≥ 2400 ft/s (731 m/s) Backface Deformation 9mm FMJ RN @ 1400 ft/s (425 m/s) BFD < 25.4 mm all locations Blunt Impact Performance Exceeds current ACH Blunt Impact Protection requirements (per AR/PD 10-02) - average below 70G across all impacts and temperatures ACCESSORY RAIL
-
-
PERFORMANCE Ballistic Performance NIJ Level III-A (according to NIJ STD 0106.01/0108.01) Fragment Performance 17gr V50 ≥ 2400 ft/s (731 m/s) Backface Deformation 9mm FMJ RN @ 1195 ft/s (365 m/s) BFD < 25.4 mm all locations Blunt Impact Performance Exceeds ACH Blunt Impact requirement per AR/PD10-02, 16Dec’13 THIS PRODUCT IS ONLY AVAILABLE TO BE SOLD DIRECTLY TO MILITARY, GOVERNMENT AND LAW ENFORCEMENT CUSTOMERS. PLEASE CONTACT US FOR PRICING, IF YOU HAVE ANY QUESTIONS OR WOULD LIKE TO PLACE AN ORDER. Notice: All armor purchases must be accompanied by copies of credentials or by a Purchase Order on agency/command letterhead. Your order will not be shipped until we receive these. Please contact us with any questions, more information and prices.
-
Out of stock
- Fits Samsung Note 9
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size LARGE (5.5) mounts
-
- Fits Samsung Note 8 (SM-N950U)
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
-
- Fits Note 20 – does not fit 20+ or 20 Ultra
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size LARGE (5.5) mounts
-
- Fits Samsung Note 10 (Standard Size, not Plus)
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
-
- Features Boa Fit System for adjustment and quick-release function
- Allows for custom fit
- Cordura, webbing and stretch materials for durability and comfort
-
- Attaches to body armor via PALS/MOLLE webbing platform
- Adjustable friction hinge
- Case snaps into mount-arm for 7G resistance
- Secondary shock-cord retainer for long-haul stowage
- NSN# 5895-01-678-5993 (FDE, 5"), 5340-01-676-8367 (FDE, 6")
-
- Fits Apple iPhone X Max and XS Max
- Designed for devices that are already IP68 rated
- Top loading design utilizes a removable IMPCT door and dust cover
- Designed, engineered and packaged in the USA from global components
- Fits size LARGE mounts
-
- Fits iPhone XR
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
