- Measures 8' by 6' 8"
- Camouflage on one side and dark green on the other
- Reinforced button holes around edges every 2' for attachment
- Easily folds for smaller use
- Hood in one corner for use as a personal concealment
- Compacts very small into included 8" by 6" drawstring bag
- Weighs 13.5oz.
- 100% Made in the USA
-
-
- Carries minimum amount of kit for short duration missions
- Carries 100oz/3L water bladder
- Top row of pouches carry 4 flash bangs or 4 40mm grenades
- Upper zipper pouch holds SOCOM issued NVG protective insert
- Removable medical pouch
- Attachment: PALS compatible Helium Whisper® system
- 100% Made in the USA
- Color: Black, Coyote Brown
-
- he Low Vis Assault Carrier (LVC) will only hold Velocity Systems Ultra Low-Visibility (ULV) Plates and/or the ULV Soft Armor Inserts. The LVC will not hold SAPI or shooter/swimmer cut plates.
- 500 Denier Cordura outer carrier
- SwiftClip® attachment system to don/doff placards and chest rigs
- Integrated Admin Pouch on upper chest with loop face
- Kangaroo pouch for magazine inserts
- Elastic loops on interior to route comm wires
- Elastic pouches on the cummerbund for magazines or radios
- Armor/Plates Sold Separately
- Two Cummerbund Options: Low-Profile Elastic (CBN1) & Molle, Plate Pocket (CBN6)
- 100% Made in the USA
-
- The Low Vis Carrier (LVC) will only hold Velocity Systems Ultra Low-Visibility (ULV) Plates and/or the ULV Soft Armor Inserts. The LVC will not hold SAPI or shooter/swimmer cut plates.
- 500 Denier Cordura outer carrier
- SwiftClip® attachment system to don/doff placards and chest rigs
- Elastic loops on interior to route comm wires
- Armor Sold Separately
- 100% Made in the USA
-
- Convert any carrier with molle on front and rear, to a carrier with front flap access and an adjustable cummerbund
- Flaps have molle webbing on outside, no webbing space is lost
- Interior mesh pockets with plate straps hold 6"x"6 or 6"x8" side armor inserts
- 100% Made in the USA
-
- Lightweight, low profile cummerbund replacement option
- 2 Quick Release Buckles
- 1½ ” Webbing
- 100% made in the USA
-
- Attaches via Helium Whisper® attachment system
- Designed to hold up to .75” thick side plates
- Designed to attach to most MOLLE compatible cummerbunds
- Can be worn on the inside or outside of the cummerbund depending on location of MOLLE and user preference
- Plate is secured with a foldable 500D Cordura flap that adheres with a hook and look fastener
- Set (Right and Left Plate Pocket)
- Weight: 2.08oz
- Material: 500D Cordura Nylon
- 100% made in the USA
-
- Secure larger plates in cummerbund
- 500D Cordura
- Hook and loop
- Sold as a set (2 right and left)
- 100% Made in the USA
-
- Can be setup for dual or single Quarter Flap opening
- Provides 6”x6” Side Plate pockets
- Allows for easy reconfiguration for mission specific needs
- 100% Made in the USA
-
- Fourteen laser cut PALS columns for attaching the necessary pouches
- Three-inch wide laser cut h-harness
- Weighs only 12 ounces
- Compatible with our plate carriers that feature the SwiftClip® attachment points
- 100% made in the USA
-
- Carries M4 type PMAGS, 7.62x51 PMAGS and AK PMAGS
- Two large general-purpose pouches
- Center zipper closure
- Comes with our ULTRAcomp 2” H-Harness
- Material: Squadron
- All buckles are ITW-Nexus
- 100% Made in the USA
-
- Modular, lightweight, and versatile
- Can be run as a stand-alone chest rig (MCCR), or as a placard (MCP)
- Accessory options including, 7 different magazine inserts, 2 radio inserts, MOLLE Side Flaps, a Kangaroo Zipper Top, and a Lower Abdomen Pouch
- 5 rows of 6 column MOLLE
- Kangaroo pouch for magazine inserts or the Kangaroo Zipper Top
- Built-in map pocket
- Side envelops pockets to add radio inserts or MOLLE side flaps
- Bottom envelope pocket to add a Lower Abdomen Pouch
- Harness comes with Padded Shoulder Sleeves, 4 row x 4 column MOLLE panel and easy size adjustment
- Weight: 12.8oz.
- Material: SQUADRON
- Dimensions: L10.5” x H7”
- Please NOTE: Some images display optional accessories that are sold separately. The Mission Configurable Chest Rig (MCCR) comes with a Harness, a waist strap, and MOLLE side flaps only.
- 100% Made in the USA
-
- Holds four (4) MPX magazines
- 2 rows of 6 column MOLLE on exterior
- Quick attach/detach option
- Internal dividers creating four separate magazine pockets
- Adjustable shock cord retainer with webbing pull tab
- SwiftClip® attachment system
- Weight: 5.76oz
- Material: 500D Cordura Nylon
- 100% made in the USA
- Holds four (4) MPX (or similar sized) magazines
- 2 rows of 6 column MOLLE on exterior
- Quick attach/detach option
- Internal dividers creating four (4)separate magazine pockets
- Adjustable shock cord retainer with webbing pull tab
- SwiftClip® attachment system
- Weight: 5.7oz
- Material: 500D Cordura Nylon
- 100% Made in the USA
-
- Modular, lightweight, and versatile
- Accessory options including, 8 different magazine inserts, 2 radio inserts, MOLLE Side Flaps, a Kangaroo Zipper Top, and a Lower Abdomen Pouch
- 5 rows of 6 column MOLLE
- Kangaroo pouch for magazine inserts or the Kangaroo Zipper Top
- Built-in map pocket
- Side envelops pockets to add radio inserts or MOLLE side flaps
- Bottom envelope pocket to add a Lower Abdomen Pouch
- Weight: 6.8oz.
- Material: SQUADRON
- Dimensions: L10.5"xH7"
- 100% Made in the USA
- Please NOTE: Some images display optional accessories that are sold separately. The Mission Configurable Placard (MCP) comes with MOLLE side
-
- Low-Visibility Stealth Trauma Aid Minimalist Pack
- Hooks directly to duty belt with IWB belt loop connectors
- Moisture resistant, lightweight
- Shock cord pull tabs for access to contents
- Center flap with hook and loop closure
- Optional Public Access Individual Bleeding Control Kit
- Material: pack cloth, 4” elastic, fiber-filled padding, and an air mesh interior
- Dimensions (WxHxD): 8 .5"x 4"(flaps folded down) x 3/8”empty
-
- Allows you to carry two additional magazines horizontally on the lower back for easy access
- VELCRO® brand fasteners are used to attach pouch to base of a pack or carrier on the bottom of the envelop
- Can be used in conjunction with Jacket Stash Pocket or by itself
- Fits the vests and carriers that have VELCRO® brand closure on bottom of plate pocket with the exception of the SCARAB and the APC
- 100% Made in the USA
-
- Holds two 5.56 magazines, or similar sized magazine
- Adjustable shock cord retention system
- Helium Whisper® style attachment
- Button hole on bottom for drainage
- 100% Made in the USA
-
- Three viewable surfaces
- Flap viewable on both sides and the base
- Weighs less than 2oz.
- 100% Made in the USA
-
- Holds one 5.56 magazine, or similar sized magazine
- Adjustable shock cord retention system
- Helium Whisper® style attachment
- Button hole on bottom for drainage
- 100% Made in the USA
-
- Small general utility envelope style pouch
- Dimensions 5"H x 5"W x 1.25"D
- Helium Whisper® style attachment
- Weight: 1.8 oz.
- 100% Made in the USA
-
- 7" by 7"
- Two pockets separated by Internal divider
- Grommets at the top for retention lines
- Loop front face for flag, ID, etc.
- Helium Whisper® style attachment
- Extremely light, weight: 2.8 oz.
- 100% Made in the USA
- Color: Coyote Brown
-
- Sleek and clean look
- Mesh lining
- Quarter flaps and placards sold separately
- S/M LEPC fits size Small, Medium and 10"x12" sized plates up to 1.2" thick and below
- L/XL LEPC fits Large and X-Large plates up to 1.2" thick and below
- Holds SAPI, Shooter, and Swimmer Plates
- Armor/Plates Sold Separately
- Three Cummerbund Options: Low-Profile Elastic (CBN1), Low-Profile Elastic With Dividers (CBN1D) & Standard MOLLE, Plate Pocket (CBN3)
- 100% Made in the USA
-
- Holds Motorola SABER Radio or similar sized radio
- Shock cord retainer with small ITW Nexus quick release buckle
- Grommet on bottom for drainage
- Helium Whisper® style attachment
- Weight: 2.5 oz. (0.07 kg)
- 100% Made in the USA
-
- Adjustable
- 11" x 6.5" Placard
- 3 rows of 6 column MOLLE webbing
- SwiftClip® attachment system
- 100% Made in the USA
-
- Holds one pistol magazine
- Adjustable shock cord retention system
- Helium Whisper® style attachment
- Button hole on bottom for drainage
- 100% Made in the USA
-
Length: 9.5″FITS THE FOLLOWING:Crye JPC Kangaroo PouchFerro Concepts Kangaroo PouchVelocity Systems Kangaroo PouchHaley Strategic D3Micro Kangaroo PouchDOES NOT FIT:Spiritus Systems Micro Flight(GHIDORAH-S 556 will fit this, release date TBD)We developed this project specifically for Velocity Systems kangaroo pouches. We realize we could design it in a way to support other kangaroo pouch systems.
-
- Allows complete removal of Cummerbund, when used in conjunction with chest rig
- Side connection points for a chest rig
- 100% Made in the USA
-
Out of stock
- Allows auxiliary equipment to swiftly clip on or off your base component
- Accept any items with an ITW 1" male side release buckle
- 100% Made in the USA
-
Out of stock
- Designed for patrolling situations where armor is not needed
- Front center zip for ease of doffing and donning
- Mesh back panel sized for a 3-litre water bladder
- Adjustable height and girth via ITW G-Hooks and shock cord
- Feature one-wrap VELCRO® Brand for cable management
- 100% Made in the USA
-
Out of stock
- Carries M4 type PMAGS, 7.62x51 PMAGS and AK PMAGS
- Two large general-purpose pouches
- Center zipper closure
- Comes with our ULTRAcomp 2” H-Harness
- Material: Squadron
- All buckles are ITW-Nexus
- 100% Made in the USA
-
Out of stock
- Fourteen laser cut PALS columns for attaching the necessary pouches
- Three-inch wide laser cut h-harness
- Weighs only 12 ounces
- Compatible with our plate carriers that feature the SwiftClip® attachment points
- 100% made in the USA
-
Out of stock
- Designed to be used in conjunction with any of our chest rigs
- Internal plate pocket and separate hydration bladder pocket
- VELCRO® Brand closure
- 6 rows of molle webbing
- ULTRAcomp 3” shoulder straps
- Adjustable side 1” webbing straps
- Plate Sleeve and Chest Rig sold separately
- The hydration bladder pocket was designed to carry a 50-70oz water bladder
- Dimensions: W10” x L15”
- 100% Made in the USA
-
Out of stock
- Allows a helmet to be attached to the back of the Pusher Back Panel and 30L Summit Pack when it is not being used
- G Hooks on the top of the helmet carrier
- Cut out for IFF devices, strobes, V lights or related accessories
- 100% Made in the USA
