-
The Helium Whisper® Micro Diddie Pouch is a small diddie bag or SSE pouch that can be very compactly stored when not in use. The bag measures 8.75” x 9.5” with a shock cord lined opening and cord lock synch. The entire bag rolls or stuffs into attached elastic pocket to stow when not in use. A webbing pull tab at the bottom allows for easy and quick deployment.
-
- Sleeve Option: Plain or Envelope Pockets
- Modern Rugby Style Collar
- Highly Breathable
- Enhanced wicking chemistry
- Soil Release Treatment
- Built In UV Protection - UVA: 97.98%, UVB: 89.84%
- Dynamic Stretch and Recovery
- Odorexx™ Antimicrobial
- Non-chafing Heat Seal Tagless Label
- 83% Nylon 17% Spandex
- 100% Made in the USA
-
- Modern Rugby Style Collar
- Two Envelope Pockets on the Sleeves
- Loop on Sleeve Pockets
- Highly Breathable
- Enhanced wicking chemistry
- Soil Release Treatment
- Built In UV Protection - UVA: 97.98%, UVB: 98.84%
- Dynamic Stretch and Recovery
- Odorexx™ Antimicrobial
- Non-chafing Heat Seal Tagless Label
- 83% Nylon 17% Spandex
- 100% Made in the USA
-
Out of stockLimited Run - MultiCam and MultiCam Black Velocity Systems Hats.
-
- Used to identify friendly forces, personnel, and equipment
- Can attach to vehicles, rucksacks, hand held or laid out on the ground
- Equipped with tie down loops
- High-visibility fluorescent orange & cerise
- Lightweight, water and abrasion resistant
- VS 17 Panel is made of 200 Denier pack cloth
- Folds into confined space when not in use, allowing for easy storage and quick access
- Color: Fluorescent Orange and Cerise
- Approximate Dimensions: Small: L24”x W24” | Medium: L31”x W10” | Large: L70”x W20”
-
- Fills gap between short duration 24HR Assault Pack and full size rucksack
- Internal frame sheet
- Ergonomically shaped aluminum wire frame
- Top loading, PALS panels on the sides
- Top pocket with small electronics pocket and two daisy chains
- Two hip climbing gear attachment loops
- Two top hauling handles
- Internal VELCRO® Brand panels for gear organization and a water bladder pocket
- Webbing on top for attaching crampons of other equipment
- 100% Made in the USA
-
- Lightweight, water and abrasion resistant pack cover designed to camouflage or protect your pack from harsh elements
- Easily adjustable drawstring and cord lock closure
- Oval slide fastener at covers base for attachment to 30L Summit Pack
- Single layer and reversible Pack Cover options
- Folds into confined space when not in use, allowing for easy storage and quick access
- Pack Cover made of 70 Denier Ripstop Nylon material
- VS17 Panel sold as accessory
-
- Accepts Inner Belts up to 2.5” Wide
- MOLLE loops for attachment of pouches, holsters, etc.
- Padded back for cooling and comfort
- Internal attachment system that can be utilized by our Enhanced Variable Width Riggers Belt
-
- Patented swivel shoulder straps with D-ring attachments (US Patent No. 9,894,962)
- Narrow ULTRAcomp™ Shoulder Straps
- 100% Made in the USA
- Sized to hold plate of corresponding carrier size, example size large carrier holds size large ESAPI Plates
- Three (3) Cummerbund Options: SCARAB™ LT/LE Cummerbund, Low-Profile Elastic Cummerbund (CBN1) MOLLE, Plate Pocket Cummerbund (CBN3)
-
- Smaller, lighter alternative to full chest rig
- Quick attach/detach option
- Holds four 5.56 magazines
- Three general purpose pouches (loop panel on center pouch)
- Adjustable shock cord retainer with webbing pull tab
- SwiftClip® attachment system
- Placard Dimensions: W12” x D3.5” x H6.5”
- Large Front Center Pocket Dimensions: W3.87” x D1.5” x H4” not including flap closure
- Two Small Front Side Pockets Dimensions: W2.87” x D1.5” x H4” not including flap closure
- 100% Made in the USA
-
- Plate pockets are sized to accommodate Stand-Alone or ICW ESAPI or Swimmer cut plates
- S/M APC fits size Small, Medium and 10"x12" sized plates
- L/XL APC fits Large and X-Large plates
- Armor/Plates Sold Separately
- Three Cummerbund Options: Low-Profile Elastic (CBN1), Low-Profile Elastic With Dividers (CBN1D) & Standard MOLLE, Plate Pocket (CBN3)
- 100% Made in the USA
-
- Allows you to keep your layering system in an easily accessible location
- VELCRO® brand fasteners are used to attach pocket to base of a pack or carrier on the bottom of the en-velop
- Can be used in conjunction with Horizontal Rear 5.56 Magazine Pouch or by itself
- Fits the vests and carriers that have VELCRO® brand closure on bottom of plate pocket with the exception of the SCARAB and the APC
- 100% Made in the USA
-
Out of stock
- Lightweight mission focused
- 24 hour dismounted operations
- Standalone assault pack and MOLLE compatible assault pack
- Sleeve for 2L (50oz.) hydration bladder
- Small cell phone or PDA pocket
- PALS webbing on exterior sides
- All buckles are ITW-Nexus IR
- Dimensions: L16”x W9”x D5”
- Volume: Approximately 10 Liters
- 100% Made in the USA
-
- Velocity Systems Fanny Pack consisting of 3 integrated compartments.
- Velcro on frontside for ID/ IFF patches, double zipper closing on main compartments and rear storage which is closed by Velcro. 25x18x10cm dimensions.
- Large Velcro tab for secure connection on your plate carrier.
- Velcro inside large compartment for additional securement.
-
- SC13 setup comprised of SCARAB™ LE front panel, SCARAB™ LT back panel, SCARAB™ LT/LE Cummerbund and removable Front Flap
- Removable Front Flap with three rows of loop MOLLE webbing and integrated flat kangaroo pouch sized to hold our Double HK417, Double 7.62, and Triple 5.56 Magazine Insert
- Admin pouch with two external rows of MOLLE webbing on chest
- Back panel includes six rows of MOLLE webbing, loop on upper rear for ID and accepts Zip-On Back Panel
- SCARAB™ LT/LE Cummerbund - lightweight and breathable with MOLLE webbing on the exterior and interior
- 100% made in the USA
-
- 500 denier Cordura Outer
- PALS webbing on front, rear and side exterior
- SwiftClip® Attachment System
- Front and rear plate pockets are accessed externally
- Integrated admin pouch and kangaroo pouch
- Drag handle on upper rear
- Groin protector ready
- Two Cummerbund Options: Low-Profile Elastic (CBN1) & Standard MOLLE, Plate Pocket (CBN3)
- 100% Made in the USA
-
Out of stock
- Carries 4ea 5.56mm mags, 2 pistol mags, up to 2 small radios
- Two GP pockets
- Loops to route antennas, wires and hydration bladder tubing
- Four one inch ITW-Nexus side release buckles
- Designed to mount to front of Low-Profile Armor Carrier
- Comes with our Standard H-Harness but is now being offered with the option of our ULTRAcomp 2" H-Harness or our ULTRAcomp 3" H-Harness
- Built in map pocket with a VELCRO® Brand closure
- 100% Made in the USA
-
Out of stock
- Low profile, light weight general purpose chest rig
- Carries four 5.56mm magazines (6.8mm or similar sized)
- Three general purpose pouches
- Three rows of PALS webbing on sides of chest rig
- Built in map pocket with a VELCRO® Brand closure
- Loops to route antennas, wires and hydration bladder tubing
- Four one inch ITW-Nexus side release buckles
- Designed to mount to front of Low-Profile Armor Carrier
- Comes with our Standard H-Harness but is now being offer with the option of our ULTRAcomp 2" H-Harness or our ULTRAcomp 3" H-Harness
- 100% Made in the USA
-
Out of stock
- Three HK417 magazine pouches with a MOLLE exterior
- Internal dividers creating four separate magazine pockets
- Adjustable shock cord retainer with webbing pull tab
- SwiftClip® attachment system
- 100% Made in the USA
-
Out of stock
- Holds three M4 magazine pouches
- 2 rows of 6 column MOLLE webbing on exterior
- Internal dividers creating three separate magazine pockets
- Adjustable shock cord retainer with webbing pull tab
- SwiftClip® attachment system
- 100% Made in the USA
-
Out of stock
- Smaller, lighter alternative to full chest rig
- Quick attach/detach option
- Holds three 7.62 magazines
- Three general purpose pouches (loop panel on center pouch)
- Adjustable shock cord retainer with webbing pull tab
- SwiftClip® attachment system
- Dimensions: W11” x D3.5” x H6”
- Large Front Center Pocket Dimensions: W3.87” x D1.5” x H4” not including flap closure
- Two Small Front Side Pockets Dimensions: W2.87” x D1.5” x H4” not including flap closure
- 100% Made in the USA