- Fits Panasonic FZ-N1 (does not fit M1 or S1)
- Increased drop-protection for MIL-STD-810G
- Full access to all buttons, camera and connector ports
- Dual socket head screws with tool for secure attachment
- Designed, engineered and packaged in the USA from global components
- Fits size MEDIUM mounts
-
What do you do with all of your brass after a long day of shooting? Quit putting them in the bottom of your range bag and get a Brass Bag from Cole-TAC. It features double stitched 1000 Denier Cordura Nylon, a Mil-Spec 550 Paracord pull cord, a cord lock, and a nylon webbing loop on the back to clip to your belt or pack. This can also be used as an additional support bag in the field if needed. When you order from Cole-TAC, you know you will get the custom hand made in the EU quality you deserve. Dimensions: 23 x 18 x 9 cm Weight: 70 g
-
Holster or unholster the tactical light on your duty belt with the TRS Belt Mount. The clip features 180° of rotation allowing the light to pivot while holstered. Available in Coyote Brown, Foliage Green, and Black. Compatible with all Tomahawk, T-MAX, and TORQ tactical lights. Includes TRS Dovetail Sleeve.
-
DIMENSIONS: 3.12″(L) x 1.01″(W) x 1.58″(H) WEIGHT: 3.2 oz. MATERIAL: 7075-T6 Aluminum COATING: Type III Hardcoat Anodized MOUNT TYPE: Rail Grabber or QD Lever (sold separately) COMPATIBILITY: (Direct) Aimpoint CompM4, Comp M4s, (w/ Aimpoint 30mm Top Ring P/N 12194) Aimpoint PRO, ACO, CompM3, CompML3, CompM2, CompML2 *NOTE* “FDE” is used throughout our catalog to reference a spectrum of colors that include tan, brown, bronze, earth, and everything in between. Due to the chemical process that takes place during Type III Hardcoat, the final finish can vary from part to part (even parts done in the same batch). Therefore, your “FDE” product may vary from other parts from UNITY and other companies, and may vary from the photos shown online.
-
MANUFACTURER Wilcox Industries WEIGHT 0.50 oz. MATERIAL High Strength Polymer, Double Braided Nylon Cord, Aluminum Spring-Loaded Gate Clip CORD LENGTH 13″ BREAKAWAY 9-12 lbs. Resistance WARRANTY 1 Year WILCOX P/N 41400G08-B (Black), 41400G08-T (Tan) COMPATIBILITY Wilcox L4 3-Hole Shrouds (Including TW Carbon & Ballistic Helmets -
DIMENSIONS: 2.08″(L) x 1.20″(W) x 1.81″(H) WEIGHT: 3.2 oz. MATERIAL: 7075-T6 Aluminum COATING: Type III Hardcoat Anodized MOUNT TYPE: Rail Grabber or QD Lever (sold separately) COMPATIBILITY: Trijicon MRO, MRO-HD *NOTE* “FDE” is used throughout our catalog to reference a spectrum of colors that include tan, brown, bronze, earth, and everything in between. Due to the chemical process that takes place during Type III Hardcoat, the final finish can vary from part to part (even parts done in the same batch). Therefore, your “FDE” product may vary from other parts from UNITY and other companies, and may vary from the photos shown online.
-
- he Low Vis Assault Carrier (LVC) will only hold Velocity Systems Ultra Low-Visibility (ULV) Plates and/or the ULV Soft Armor Inserts. The LVC will not hold SAPI or shooter/swimmer cut plates.
- 500 Denier Cordura outer carrier
- SwiftClip® attachment system to don/doff placards and chest rigs
- Integrated Admin Pouch on upper chest with loop face
- Kangaroo pouch for magazine inserts
- Elastic loops on interior to route comm wires
- Elastic pouches on the cummerbund for magazines or radios
- Armor/Plates Sold Separately
- Two Cummerbund Options: Low-Profile Elastic (CBN1) & Molle, Plate Pocket (CBN6)
- 100% Made in the USA
-
- The Low Vis Carrier (LVC) will only hold Velocity Systems Ultra Low-Visibility (ULV) Plates and/or the ULV Soft Armor Inserts. The LVC will not hold SAPI or shooter/swimmer cut plates.
- 500 Denier Cordura outer carrier
- SwiftClip® attachment system to don/doff placards and chest rigs
- Elastic loops on interior to route comm wires
- Armor Sold Separately
- 100% Made in the USA
-
- Attaches via Helium Whisper® attachment system
- Designed to hold up to .75” thick side plates
- Designed to attach to most MOLLE compatible cummerbunds
- Can be worn on the inside or outside of the cummerbund depending on location of MOLLE and user preference
- Plate is secured with a foldable 500D Cordura flap that adheres with a hook and look fastener
- Set (Right and Left Plate Pocket)
- Weight: 2.08oz
- Material: 500D Cordura Nylon
- 100% made in the USA
-
- Designed for all 8" and 7.5" tablet Juggernaut.Cases/SLEEVs
- Includes polymer mount interface with angled foam pad and 2-inch width leg strap
- Fastex closure system for rapid egress
- Finite adjustment with Boa Fit System for custom fit
- Integrated cable routing feature to mitigate snag for flight controls
- NSN# 5342-01-674-3022 (FDE, 8")
-
The OPRTR provides crucial device protection in scenarios where real time response is vital to your team’s coordination. We go well beyond MIL standard for drop protection, and offer mission-specific mount and cable solutions that interface with other essential tactical equipment.
- Fits Samsung Galaxy S22
- Designed for devices that are already IP68 rated
- Top load with locking dual latch door
- Hinged or removable Quick Disconnect door secured by thumbscrews
- Compatible with all Juggernaut Quick Disconnect (QD) cables
- QD door and cables seal to device
- Screen protector compatible with Juggernaut SHLD
- Lanyard attachment points
- Fits size MEDIUM mounts
-
The ENDVR is our lowest profile case, created for everyday use for the active person. Designed and engineered with the same rugged DNA that Juggernaut is known for, and compatible with our full range of mount options.
- Fits Samsung Galaxy S22
- Designed for devices that are already IP68 rated
- Front-face load
- Screen protector compatible with Juggernaut SHLD
- Fits size Small mounts
-
The ENDVR is our lowest profile case, created for everyday use for the active person. Designed and engineered with the same rugged DNA that Juggernaut is known for, and compatible with our full range of mount options.
- Fits Samsung Galaxy S22 Ultra
- Designed for devices that are already IP68 rated
- Front-face load
- Screen protector compatible with Juggernaut SHLD
- Fits size Large mounts
-
The ADVNTR is an evolution of our IMPCT model. We compiled all the feedback from extreme sportsmen, law enforcement, federal agencies, and first responders into a new design engineered to offer superior drop protection and mounting capability with additional grip and no loose components.
- Fits Samsung Galaxy S22
- Designed for devices that are already IP68 rated
- Top load with secure latch
- Screen protector compatible with Juggernaut SHLD
- Lanyard attachment points
- Fits size Medium mounts
-
- Rugged polymer mount interface
- Compatible with all Juggernaut.Case models
- 4-hole screw pattern matches up to RAM Mount part RAM-B-202U-23 (RAM parts not included)
-
The ADVNTR is an evolution of our IMPCT model. We compiled all the feedback from extreme sportsmen, law enforcement, federal agencies, and first responders into a new design engineered to offer superior drop protection and mounting capability with additional grip and no loose components.
- Fits Samsung Galaxy S22 Ultra
- Designed for devices that are already IP68 rated
- Top load with secure latch
- Screen protector compatible with Juggernaut SHLD
- Lanyard attachment points
- Fits size X-Large mounts