-
- Attaches to the sternum strap of an MFF Container (MC-4, Javelin or RA-1) or a Tandem-Rig
- Adjustable friction hinge
- Cordura sleeve with padded spacer mesh back
- Includes webbing strap to route through backpack straps
- Only available in FDE (flat dark earth)
- Berry compliant (Made in USA)
- NSN# 5895-01-684-2780 (FDE, 5")
-
- Fits Galaxy S10E – does not fit S10, S10+ or S10 5G
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
-
- Fits Galaxy S20 – does not fit 20+, 20 Ultra, 20 FE or Note 20
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
-
- Fits Galaxy S20 Ultra – does not fit 20, 20+, 20 FE or Note 20, Note 20 Ultra
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size LARGE (5.5) mounts
-
- Fits Galaxy S20+ (PLUS) – does not fit standard 20, S20 FE, 20 Ultra or Note 20
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
-
Out of stock
- Kit includes tablet SLEEV
- Robust, ergonomic two-strap kneeboard mount
- Withstands the 650kt blast during ejection from a fixed wing aircraft (EjectionSeat Windblast Tested/Approved)
- Tablet case is bolted into the mount platform
- Secondary 1" strap to keep the EKB from sliding down the pilot's leg during normal egress from the cockpit
- Underside of mount is padded with ToughTek No-Slip material
- Features ITW-Cobra Buckles on leg straps
- NSN# 7045-01-676-9842 (FDE, 7.5"), 7045-01-677-0426 (FDE, 8")
-
- Ruggedized polymer HAHO freefall accessory
- Integrates with PALS Armor Mount or HAHO Sternum Mount, and any of our smartphone case models (sold separately)
- 5 series fits the 4.5" and 5" PALS or HAHO sternum mounts. 6 series fits the 5.5" and 6" PALS or HAHO sternum mounts
- Includes red LED back lit oil-filled Oceanic compass
- Provides mounting tabs for Garmin GPS 401/601/701 (Garmin not included – optional add-on)
- Provides low-profile, stowable hinged platform for use under canopy
- Allows for situational awareness and visibility of landing zone
- Can be used as stand-alone device when routed through container strap (not typically a military approved configuration)
- NSN# 5895-01-671-8314 (FDE, 5"), 5340-01-672-6079 (FDE, 6")
-
Out of stockGALAXY S8
- Fits Samsung Galaxy S8 (SM-G950A) – standard size, not plus
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
- Fits Samsung Galaxy S8+ (PLUS)
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
-
Galaxy S9
- Fits Samsung Galaxy S9 (SM-G960A) – standard size, not plus
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
- Fits Samsung Galaxy S9+ (PLUS)
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
- NSN# 8115-01-672-6050 (FDE)
-
Iphone 11
- Fits iPhone 11 – does not fit 11Pro or 11 Pro Max
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
- Fits iPhone 11 Pro – does not fit 11 or 11 Pro Max
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
-
- Fits iPhone 11 Pro Max – does not fit 11 or 11 Pro
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size LARGE (5.5) mounts
-
Out of stockiPhone 7 & 8
- Fits iPhone 7 & 8 – standard size, not plus (ALSO FITS THE iPHONE SE 2020)
- Designed for devices that are already environmentally sealed (also fits iPhone 6, which is not a sealed device)
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
- Fits iPhone 7+ & 8+ (PLUS)
- Designed for devices that are already environmentally sealed (Also fits 6+ which is not a sealed device)
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size LARGE (5.5) mounts
-
Out of stock
- Fits Samsung Note 9
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size LARGE (5.5) mounts
-
PERFORMANCE Ballistic Performance NIJ Level III-A (according to NIJ STD 0106.01/0108.01) Fragment Performance 17gr V50 ≥ 2400 ft/s (731 m/s) Backface Deformation 9mm FMJ RN @ 1195 ft/s (365 m/s) BFD < 25.4 mm all locations Blunt Impact Performance Exceeds ACH Blunt Impact requirement per AR/PD10-02, 16Dec’13 THIS PRODUCT IS ONLY AVAILABLE TO BE SOLD DIRECTLY TO MILITARY, GOVERNMENT AND LAW ENFORCEMENT CUSTOMERS. PLEASE CONTACT US FOR PRICING, IF YOU HAVE ANY QUESTIONS OR WOULD LIKE TO PLACE AN ORDER. Notice: All armor purchases must be accompanied by copies of credentials or by a Purchase Order on agency/command letterhead. Your order will not be shipped until we receive these. Please contact us with any questions, more information and prices.
-
PERFORMANCE Ballistic Performance NIJ Level III-A (according to NIJ STD 0106.01/0108.01) Fragment Performance 17gr V50 ≥ 2400 ft/s (731 m/s) Backface Deformation 9mm FMJ RN @ 1400 ft/s (425 m/s) BFD < 25.4 mm all locations Blunt Impact Performance Exceeds current ACH Blunt Impact Protection requirements (per AR/PD 10-02) - average below 70G across all impacts and temperatures ACCESSORY RAIL
-
-
PERFORMANCE
- Meets the requirements of BS EN 12492:2012 standard for mountaineering helmets
- Meets the requirements of BS EN 1385:2012 standard for whitewater helmets
- Meets additional off-crown impact requirements of BS EN 14052:2012 European standard for high performance industrial helmets NOTE: EN 14052 requires a low-strength chinstrap, the EXFIL® SAR is not fully certified to BS EN 14052:2012 in order to meet more rigorous chinstrap requirements of BS EN 12492:2012 and reduce the risk of losing the helmet during a fall.
- Meets Advanced Combat Helmet (ACH) Blunt Impact Protection requirements (per AR/PD 10-02 Rev A)
-
PERFORMANCE
- Meets the requirements of BS EN 12492:2012 standard for mountaineering helmets
- Meets the requirements of BS EN 1385:2012 standard for whitewater helmets
- Meets additional off-crown impact requirements of BS EN 14052:2012 European standard for high performance industrial helmets NOTE: EN 14052 requires a low-strength chinstrap, the EXFIL® SAR is not fully certified to BS EN 14052:2012 in order to meet more rigorous chinstrap requirements of BS EN 12492:2012 and reduce the risk of losing the helmet during a fall.
- Meets Advanced Combat Helmet (ACH) Blunt Impact Protection requirements (per AR/PD 10-02 Rev A)
-
Out of stockThe EXFIL® Peltor™ quick release adapter back plate set allows you to convert a Peltor™ helmet mounting system for installation onto the Team Wendy EXFIL® Rail 2.0, EXFIL® Rail 3.0, EXFIL® SAR Rail and M-216™ Rail systems. Once converted this system allows for tool-free attachment of all Peltor™ COMTAC systems to Team Wendy rail systems.
-
Out of stock
- Works with all Peltor™ COMTAC systems and a variety of other brands and models
- Eliminates rigid metal headband, providing better fit and comfort
- Tool-free attachment directly to the quick release slot on the EXFIL® Rail 2.0, EXFIL® Rail 3.0, EXFIL® SAR Rail and M-216™ Rail systems
- Open and closed positions allow quick donning and doffing of helmet
- Wiring is easily routed in or outside the helmet shell
- Kit includes one boom microphone adapter