-
The Helium Whisper® Medical Pouch has internal elastic webbing for organization and YKK Zipper closure with quiet Chums zipper pulls. -
The Helium Whisper® Micro Diddie Pouch is a small diddie bag or SSE pouch that can be very compactly stored when not in use. The bag measures 8.75” x 9.5” with a shock cord lined opening and cord lock synch. The entire bag rolls or stuffs into attached elastic pocket to stow when not in use. A webbing pull tab at the bottom allows for easy and quick deployment.
-
- Sleeve Option: Plain or Envelope Pockets
- Modern Rugby Style Collar
- Highly Breathable
- Enhanced wicking chemistry
- Soil Release Treatment
- Built In UV Protection - UVA: 97.98%, UVB: 89.84%
- Dynamic Stretch and Recovery
- Odorexx™ Antimicrobial
- Non-chafing Heat Seal Tagless Label
- 83% Nylon 17% Spandex
- 100% Made in the USA
-
- Modern Rugby Style Collar
- Two Envelope Pockets on the Sleeves
- Loop on Sleeve Pockets
- Highly Breathable
- Enhanced wicking chemistry
- Soil Release Treatment
- Built In UV Protection - UVA: 97.98%, UVB: 98.84%
- Dynamic Stretch and Recovery
- Odorexx™ Antimicrobial
- Non-chafing Heat Seal Tagless Label
- 83% Nylon 17% Spandex
- 100% Made in the USA
-
Comfortably and safely carry and conceal your firearms with our minimalistic KYDEX Holster design. Our KYDEX Appendix Inside the Waistband holsters provide you with full trigger guard protection and perfect retention. Utilizing a Concealment Claw, this holster is designed with the highest level of concealment in mind.
-
Out of stock
Limited Run - MultiCam and MultiCam Black Velocity Systems Hats.
-
- Used to identify friendly forces, personnel, and equipment
- Can attach to vehicles, rucksacks, hand held or laid out on the ground
- Equipped with tie down loops
- High-visibility fluorescent orange & cerise
- Lightweight, water and abrasion resistant
- VS 17 Panel is made of 200 Denier pack cloth
- Folds into confined space when not in use, allowing for easy storage and quick access
- Color: Fluorescent Orange and Cerise
- Approximate Dimensions: Small: L24”x W24” | Medium: L31”x W10” | Large: L70”x W20”
-
- Fills gap between short duration 24HR Assault Pack and full size rucksack
- Internal frame sheet
- Ergonomically shaped aluminum wire frame
- Top loading, PALS panels on the sides
- Top pocket with small electronics pocket and two daisy chains
- Two hip climbing gear attachment loops
- Two top hauling handles
- Internal VELCRO® Brand panels for gear organization and a water bladder pocket
- Webbing on top for attaching crampons of other equipment
- 100% Made in the USA
-
- Lightweight, water and abrasion resistant pack cover designed to camouflage or protect your pack from harsh elements
- Easily adjustable drawstring and cord lock closure
- Oval slide fastener at covers base for attachment to 30L Summit Pack
- Single layer and reversible Pack Cover options
- Folds into confined space when not in use, allowing for easy storage and quick access
- Pack Cover made of 70 Denier Ripstop Nylon material
- VS17 Panel sold as accessory
-
Vision
- Frameless FreeFloat™ lens for a comfortable fit and increased impact resistance
- Anti-fog and scratch-resistant coating on all lenses
- 100% UVA/B protection
- 7-base shield lens curvature offers a wraparound fit
- Super thin, moldable alloy temples fit cleanly under ear protection without breaking the seal
- Adjustable nose piece for a perfect fit
- PivLock™ interchangeable lens system makes lens changes easy
-
- Accepts Inner Belts up to 2.5” Wide
- MOLLE loops for attachment of pouches, holsters, etc.
- Padded back for cooling and comfort
- Internal attachment system that can be utilized by our Enhanced Variable Width Riggers Belt
-
- Patented swivel shoulder straps with D-ring attachments (US Patent No. 9,894,962)
- Narrow ULTRAcomp™ Shoulder Straps
- 100% Made in the USA
- Sized to hold plate of corresponding carrier size, example size large carrier holds size large ESAPI Plates
- Three (3) Cummerbund Options: SCARAB™ LT/LE Cummerbund, Low-Profile Elastic Cummerbund (CBN1) MOLLE, Plate Pocket Cummerbund (CBN3)
-
- Smaller, lighter alternative to full chest rig
- Quick attach/detach option
- Holds four 5.56 magazines
- Three general purpose pouches (loop panel on center pouch)
- Adjustable shock cord retainer with webbing pull tab
- SwiftClip® attachment system
- Placard Dimensions: W12” x D3.5” x H6.5”
- Large Front Center Pocket Dimensions: W3.87” x D1.5” x H4” not including flap closure
- Two Small Front Side Pockets Dimensions: W2.87” x D1.5” x H4” not including flap closure
- 100% Made in the USA
-
- Holds a CAT tourniquet
- Simple but durable shock cord retainer
- Weighs 0.2 oz. (6 grams)
- 100% Made in the USA
-
- The C-A-T Tourniquet (Combat Application Tourniquet) utilizes a durable windlass system with a free-moving internal band providing true circumferential pressure to the extremity.
- Once adequately tightened, bleeding will cease and the windlass is locked into place.
-
- Plate pockets are sized to accommodate Stand-Alone or ICW ESAPI or Swimmer cut plates
- S/M APC fits size Small, Medium and 10"x12" sized plates
- L/XL APC fits Large and X-Large plates
- Armor/Plates Sold Separately
- Three Cummerbund Options: Low-Profile Elastic (CBN1), Low-Profile Elastic With Dividers (CBN1D) & Standard MOLLE, Plate Pocket (CBN3)
- 100% Made in the USA
-
- Allows you to keep your layering system in an easily accessible location
- VELCRO® brand fasteners are used to attach pocket to base of a pack or carrier on the bottom of the en-velop
- Can be used in conjunction with Horizontal Rear 5.56 Magazine Pouch or by itself
- Fits the vests and carriers that have VELCRO® brand closure on bottom of plate pocket with the exception of the SCARAB and the APC
- 100% Made in the USA
-
- 3.25"L x 1.5"W x 4"H
- Grommet on the bottom for drainage
- Helium Whisper® style attachment
- Weighs only 1.4 oz.
- 100% Made in the USA
-
- Holds MBITR AN/PRC-148 or Harris AN/PRC-152 Radio
- Shock cord retainer with Small ITW Nexus quick release buckle
- Grommet at the bottom for drainage
- Helium Whisper® style attachment
- Weight: 2.8 oz.
- 100% Made in the USA
-
Out of stock
- Lightweight mission focused
- 24 hour dismounted operations
- Standalone assault pack and MOLLE compatible assault pack
- Sleeve for 2L (50oz.) hydration bladder
- Small cell phone or PDA pocket
- PALS webbing on exterior sides
- All buckles are ITW-Nexus IR
- Dimensions: L16”x W9”x D5”
- Volume: Approximately 10 Liters
- 100% Made in the USA
-
- Quick on/off pack for sustainment supplies and hydration
- Size of Back Panel corresponds to size of Carrier you purchase
- 100% Made in the USA
-
Padded gunbag to protect long guns
-
INT DIMENSION MM. L1135 W340 D70
-
Please, contact us for more information and price
-
- This insert is for use with the Magnetic Placard, MOLLE Panel and Magnetic Placard, Triple 5.56 Elastic
- Works over fleeces and light jackets
- 100% Made in the USA
-
- 49lb Rare Earth Magnets used
- Holds through the Chameleon shirt, ULV Carrier, and additional thin clothing over the armor system (ie. fleeces and light jackets)
- Dimensions: 9.5”x.5”x5.75”
- This pouch works with steel plates or the Magnetic Compatibility Insert only
- 100% Made in the USA
-
- 49lb Rare Earth Magnets used
- Holds through the Chameleon shirt, ULV Carrier, and additional thin clothing over the armor system (ie. fleeces and light jackets)
- Dimensions: 9.5”x.5”x5.75”
- This pouch works with steel plates or the Magnetic Compatibility Insert only
- 100% Made in the USA
-
Tactical gun cases for hunting guns, archery, etc. Please, contact us for more information and price
-
INT DIMENSION MM. L276 W200 D120
INT DIMENSION INC. L10 7/8 W7 7/8 D4 3/4
Please, contact us for more information and price -
Case size makes it the ideal solution to store one pistol or one ipad/compact notebook with accessories. It can be stored in vertical position. Retractable handle. Padlockable points. Please, contact us for more information and price
-
Heavy duty cases with wheels and telescopic handle. Sealing o-ring and removable lid. Available empty or with layers of pre-cubed foam in the bottom and convoluted foam in the lid. Self oiling free running wheels. Please, contact us for more information and price
-
Technical features:
- Zipper: YKK AquaSeal #10, 300mBar airtight
- Coating:Thick double sided TPU laminated
- Fabric: 840 denier 6.6 HT Nylon
- Foam:Dual density EVA shoulderstraps for comfort
- Reinforcement: Vulcanized rubber
- Frame: HDPE and EVA foam
-
Technical features:
- Zipper: 2 way lockable #10 YKK Coil
- Coating: Double sided TPU laminate base
- Fabric: 1000 denier Cordura
- Foam: Dual density EVA shoulderstraps for comfort
-
Technical features:
- Zipper: YKK AquaSeal #10, 300mBar airtight
- Coating:Thick double sided TPU laminated
- Fabric: 840 denier 6.6 HT Nylon
- Foam:Dual density EVA shoulderstraps for comfort
-
- Controls Bleeding: Promotes clotting within minutes, allowing responders to control bleeding in an efficient and timely manner.
- Easy To Use: QuikClot Combat Gauze uses the same placement technique as standard gauze
- Expedited Product Access: Eight tear points for quicker application
- Heat Free: QuikClot products produce NO Heat
- Expiration: 5 year shelf life
-
Out of stock
- Sterile bandage suitable for applying immediate direct pressure
- Simple application that is easy to remember under combat/survival stress
- Omission of pressure bars and hooks to moderate the use of fine motor skills
- Quick-Grip Roll Control tabs to prevent the bandage from unrolling during application
- Vacuum-sealed, low-cube packaging with NAR's signature Red-Tip Technology® red tear notches
-
- The compressed, rolled gauze is ideal for wound bandaging and wrapping of injuries
- Unique crinkle weave ensures excellent fluid absorption
- Ultra-compact size that expands to cover larger wound areas
- Used as backing gauze for hemostatic agents, in conjunction with a compression bandage to control hemorrhage
-
Out of stock
- Rugged needle/catheter protective tube
- Easy ID textured twist top with handy clip
- Easy-open container for quick access
- Capless flash chamber for immediate confirmation of needle placement
- Convenient, compact size
- U.S. Patents D595,847 and 001002372-0001, Patent(s) Pending
-
Out of stock
- Easily molded to fit most fractures
- Both lightweight and strong
- Waterproof, Reusable, Easy to clean, Compact
- Impervious to environmental extremes
-
- 100% nitrile gloves
- Textured for improved wet and dry gripping
- Longer and thicker than standard nitrile gloves
- Form fitting
- Extended, beaded cuff for quick and easy donning
- Sand color
- Available in sizes S, M, L and XL
- Non-sterile
-
Out of stock
- Enhanced serrated lower edge cuts through the toughest materials
- Clothing-lift lip and rounded tip for ultimate patient safety
- Soft-grip, non-slip contoured handles for maximum control even when wet
- Unique all-over black color
- Includes an O2 wrench
-
Out of stock
No Training Scars
- Low profile minimizes cheek-weld interference
- Low-riding seal is eyewear compatible
- 97% Filter Effectiveness at 0.3 microns
- Very breathable even during strenuous activity
- Simple filter replacement
- Multiple strap options for varying kit setups
- Compatible with Invisio®headsets
- Accessory port for mic integration
- Soft-touch medical-grade silicone
- Works well with facial hair
- Not designed for medical use
-
Out of stock
- More than 97% effective
- Filter material analysis achieved 97% efficiency according to testing standard NaCl 32 LPM TSI8130
- Very breathable even during strenuous activity
- Filter housing is made from biodegradable plastic known to pass ASTM D6400
- Simple filter replacement
-
ANVL UKON is a micro Trijicon RMR rifle mount that incorporates a single focal plane absolute co-witness backup iron sight package.
-
It utilizes a standard type AR-15 adjustable front sight post.
-
Using our custom pistol Mag Carrier, comfortably carry your backup magazines.
-
Using our custom Rifle Mag Carrier, comfortably carry your backup magazines.
-
ANVL UKON 2 T2 V2 is a micro Aimpoint T2 type rifle mount that incorporates a single focal plane absolute co-witness backup iron sight package
-
ANR Design Lightbearing Tactical OWB Holster incorporates the Safariland QLS Fork. This holster comes standard with adjustable retention, suppressor height sight channel, and optic cut sweat guard. Please contact us for more information and prices. These will change depending on the weapon model, and color. please visit this link to see the models and colors
-
Designed for right-handed Shooters only. Customer is responsible for sourcing their own Female RTI Disc set up, or Safariland Q22 QLS Female receptacle. Please contact us to find out about the different weapon possibilities, as well as prices and colors.
-
The KHARD Medical Insert System is a two-piece insert designed to fit the 30L and 45L Arc’Teryx family of Assault and Khard Packs.
-
The HKR-2N1 gives the user the ability to turn their 2 point 1”-25mm web sling into a single point that offers them the security of a hook style sling.
-
Out of stock
The ST-MCX is a robust and unobtrusive sling mount for your MCX lower receiver.
-
The Vastus System from 9Toes Design is a lightweight thigh band mod that will work with any drop-leg system sporting a Safariland hole pattern. The system keeps your thigh strap dropped below the holster and belt mount for a more comfortable fit that prevents the strap from riding up the leg.
-
Adjustable circumference, with a regulating strap and easy off buckle. Keep your holster tight to your thigh and body.
-
The ANR DESIGN LLC Tactical Belt Mount System was designed as a solution to applying maximum cant to a holster system. Many Safariland ALS holsters are at a fixed 15 degree forward cant causing ingress of foreign material into the optics shroud, rendering the optic unusable.
-
Out of stock
Halite bags are independently tested and all temperatures stated correlate to EN23537. Temperature EN 23537: Comfort: 7°C / 45F Comfort Limit: 3°C / 37F Extreme: -11°C / 12F Sleep rating: 0°C / 32F Internal Size Dimensions EN 23537: Inside lenght: 245cm Inside With: 95cmInside Knee: 76cm Inside Foot width: 52cm Pack size:Base D19 x H26 Total weight:1064g
-
FEATURES
Fill weight: 850g (180cm/6'0) 905g (200/6’6”) Fill power: 850 FP Goose Construction: Continuous baffles with draft tue Zipper: Full length YKK #5 LZ• Loft spacing: 18cm Fabrics: Gore Windstopper / Taffeta Nylon Inside Girth: Shoulder: 170cm / Hip: 147cm / Foot: 104cm Pack size: approx: 23x46 Weight: TBC app. 1500 grams Temp. rating: -18 C With Overbag: Est. -32 C Made in the USA! Berry Amendment compliant -
Out of stock
FEATURES
Fill weight: 540g (180cm/6'0) 595g (200/6’6”) Fill power: 850 FP Goose Construction: Continuous baffles with draft-tube Zipper: Full length YKK #5 LZ Loft spacing: 14cm Fabrics: Gore Windstopper / Taffeta Nylon Inside Girth: Shoulder: 163cm / Hip: 140cm / Foot: 99cm Pack size: approx: 21x38 Weight: TBC app. 900 grams Temp. rating: -9 C With Overbag: est. -22 C Made in the USA! Berry Amendment compliant -
Weight: 950 g Dimensions: L55cm x W30cm x H32cm / L21.5” x W12” x H12.5” Precise Volume: 50 Liters / 3050 CU IN Design features:
- Quick release shoulder straps with 2M ROC buckles
- Inner side-wall zippered pockets
- Carry handles on each short end
- Lightweight & waterproof 420 denier HT Nylon fabric with double TPU coating
- Rubberized reinforcement fabric with embossed Halite logo on the bottom
- TIZIP® #10 MasterSeal Waterproof Zipper (500 mbar)
- RF Welded waterproof construction
- Deflation valve
-
Features FABRIC PERFORMANCE Wind Resistant Water Resistant Breathable Lightweight Wicking Ultra Tactile DESIGN FEATURES Touchscreen Compatible Close Fit for Enhanced Tactility Pre-Curve Boxed Construction Synthetic Leather Palm + Fingertips FUNCTIONAL DETAILS Hook and Loop Cuff Closures Leather Palm Bonded to Lining for Secure Grip
-
Out of stock
Features
FABRIC PERFORMANCE Water Resistant Breathable Windproof Ultra-Tactile Lightweight Wicking Quick Drying Leather Palm DESIGN FEATURES Carabiner Loop Pre-Curve Boxed Construction FUNCTIONAL DETAILS Tapered Wrist -
Out of stock
Features
FABRIC PERFORMANCE Flame Resistant Tactile Durable DESIGN FEATURES Touchscreen Compatible Precision Grip™ Seamless Contact Hybrid Leather and Fabric Finger Sidewalls Leather Palm with Overlay Reinforcements FUNCTIONAL DETAILS Hook and Loop Cuff Closures Pull Loop for Easy On/Off -
Out of stock
FABRIC : SHELL: 97% polyester, 3% spandex, PALM: 60% nylon, 40% polyurethane
Features
FABRIC PERFORMANCE Breathable Ultra-Tactile Lightweight Quick Drying Synthetic Leather Palm Movement-Mirroring Stretch DESIGN FEATURES Anti-Slip Silicone Pads Touchscreen Compatible Pre-Curve Boxed Construction FUNCTIONAL DETAILS Hook and Loop Cuff Closures Pull Loop for Easy On/Off Contoured Wrist Tapered Wrist -
Weight: 1400g Dimensions: L63 × W36 × H28 cm Precise volume: 61L Design Features:
- 2 carry handles on each end
- Daisy chain on both sides for quick attachment
- Adjustable and removable shoulderstaps
- Safe and lockable zipperhead for flights
- Oral valve to compress or inflate with air
- Zipper:YKK Aquaseal #10, 300mBar airtight
- Coating:Double sided TPU laminate
- Fabric:840 denier 6.6 HT Nylon main. 420 6.6 HT Nylon side
- Foam:Dual density EVA shoulderstraps for comfort
-
Weight: 1750g Dimensions: L70 × W43 × H32 cm Design Features:
- 2 carry handles on each end
- Daisy chain on both sides for quick attachment
- Adjustable and removable shoulderstaps
- Safe and lockable zipperhead for flights
- Oral valve to compress or inflate with air
- Zipper:YKK Aquaseal #10, 300mBar airtight
- Coating:Double sided TPU laminate
- Fabric:840 denier 6.6 HT Nylon main. 420 6.6 HT Nylon side
- Foam:Dual density EVA shoulderstraps for comfort
-
IFF cordura/ IR patch in multicam or multicam black. To be worn on helmet or shoulder Velcro patch for friendly forces identification purposes (Size 9x5 cm)
-
- Attaches to the sternum strap of an MFF Container (MC-4, Javelin or RA-1) or a Tandem-Rig
- Adjustable friction hinge
- Cordura sleeve with padded spacer mesh back
- Includes webbing strap to route through backpack straps
- Only available in FDE (flat dark earth)
- Berry compliant (Made in USA)
- NSN# 5895-01-684-2780 (FDE, 5")
-
- Fits Samsung Galaxy S10 (Standard Size, not Plus)
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
-
- Fits Samsung Galaxy S10+ (PLUS)
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
-
- Fits Galaxy S10E – does not fit S10, S10+ or S10 5G
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
-
- Fits Galaxy S20 – does not fit 20+, 20 Ultra, 20 FE or Note 20
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
-
- Fits Galaxy S20 Ultra – does not fit 20, 20+, 20 FE or Note 20, Note 20 Ultra
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size LARGE (5.5) mounts
-
- Fits Galaxy S20+ (PLUS) – does not fit standard 20, S20 FE, 20 Ultra or Note 20
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
-
Out of stock
- Kit includes tablet SLEEV
- Robust, ergonomic two-strap kneeboard mount
- Withstands the 650kt blast during ejection from a fixed wing aircraft (EjectionSeat Windblast Tested/Approved)
- Tablet case is bolted into the mount platform
- Secondary 1" strap to keep the EKB from sliding down the pilot's leg during normal egress from the cockpit
- Underside of mount is padded with ToughTek No-Slip material
- Features ITW-Cobra Buckles on leg straps
- NSN# 7045-01-676-9842 (FDE, 7.5"), 7045-01-677-0426 (FDE, 8")
-
- Ruggedized polymer HAHO freefall accessory
- Integrates with PALS Armor Mount or HAHO Sternum Mount, and any of our smartphone case models (sold separately)
- 5 series fits the 4.5" and 5" PALS or HAHO sternum mounts. 6 series fits the 5.5" and 6" PALS or HAHO sternum mounts
- Includes red LED back lit oil-filled Oceanic compass
- Provides mounting tabs for Garmin GPS 401/601/701 (Garmin not included – optional add-on)
- Provides low-profile, stowable hinged platform for use under canopy
- Allows for situational awareness and visibility of landing zone
- Can be used as stand-alone device when routed through container strap (not typically a military approved configuration)
- NSN# 5895-01-671-8314 (FDE, 5"), 5340-01-672-6079 (FDE, 6")
-
Out of stock
GALAXY S8
- Fits Samsung Galaxy S8 (SM-G950A) – standard size, not plus
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
- Fits Samsung Galaxy S8+ (PLUS)
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
-
Galaxy S9
- Fits Samsung Galaxy S9 (SM-G960A) – standard size, not plus
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
- Fits Samsung Galaxy S9+ (PLUS)
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
- NSN# 8115-01-672-6050 (FDE)
-
Iphone 11
- Fits iPhone 11 – does not fit 11Pro or 11 Pro Max
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
- Fits iPhone 11 Pro – does not fit 11 or 11 Pro Max
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
-
- Fits iPhone 11 Pro Max – does not fit 11 or 11 Pro
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size LARGE (5.5) mounts
-
Out of stock
iPhone 7 & 8
- Fits iPhone 7 & 8 – standard size, not plus (ALSO FITS THE iPHONE SE 2020)
- Designed for devices that are already environmentally sealed (also fits iPhone 6, which is not a sealed device)
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
- Fits iPhone 7+ & 8+ (PLUS)
- Designed for devices that are already environmentally sealed (Also fits 6+ which is not a sealed device)
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size LARGE (5.5) mounts
-
- Fits iPhone X & XS – does not fit XR or XS Max
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
-
- Fits iPhone XR
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
-
- Fits Apple iPhone X Max and XS Max
- Designed for devices that are already IP68 rated
- Top loading design utilizes a removable IMPCT door and dust cover
- Designed, engineered and packaged in the USA from global components
- Fits size LARGE mounts
-
- Attaches to body armor via PALS/MOLLE webbing platform
- Adjustable friction hinge
- Case snaps into mount-arm for 7G resistance
- Secondary shock-cord retainer for long-haul stowage
- NSN# 5895-01-678-5993 (FDE, 5"), 5340-01-676-8367 (FDE, 6")
-
- Features Boa Fit System for adjustment and quick-release function
- Allows for custom fit
- Cordura, webbing and stretch materials for durability and comfort
-
- Fits Samsung Note 10 (Standard Size, not Plus)
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
-
- Fits Note 20 – does not fit 20+ or 20 Ultra
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size LARGE (5.5) mounts
-
- Fits Samsung Note 8 (SM-N950U)
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
-
Out of stock
- Fits Samsung Note 9
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size LARGE (5.5) mounts
-
PERFORMANCE Ballistic Performance NIJ Level III-A (according to NIJ STD 0106.01/0108.01) Fragment Performance 17gr V50 ≥ 2400 ft/s (731 m/s) Backface Deformation 9mm FMJ RN @ 1195 ft/s (365 m/s) BFD < 25.4 mm all locations Blunt Impact Performance Exceeds ACH Blunt Impact requirement per AR/PD10-02, 16Dec’13 THIS PRODUCT IS ONLY AVAILABLE TO BE SOLD DIRECTLY TO MILITARY, GOVERNMENT AND LAW ENFORCEMENT CUSTOMERS. PLEASE CONTACT US FOR PRICING, IF YOU HAVE ANY QUESTIONS OR WOULD LIKE TO PLACE AN ORDER. Notice: All armor purchases must be accompanied by copies of credentials or by a Purchase Order on agency/command letterhead. Your order will not be shipped until we receive these. Please contact us with any questions, more information and prices.
-
PERFORMANCE Ballistic Performance NIJ Level III-A (according to NIJ STD 0106.01/0108.01) Fragment Performance 17gr V50 ≥ 2400 ft/s (731 m/s) Backface Deformation 9mm FMJ RN @ 1400 ft/s (425 m/s) BFD < 25.4 mm all locations Blunt Impact Performance Exceeds current ACH Blunt Impact Protection requirements (per AR/PD 10-02) - average below 70G across all impacts and temperatures ACCESSORY RAIL
-
-
PERFORMANCE Independently tested to meet all performance requirements of BS EN 1385:2012 standard for whitewater helmets. ACCESSORY RAIL
-
-
PERFORMANCE
- Meets the requirements of BS EN 12492:2012 standard for mountaineering helmets
- Meets the requirements of BS EN 1385:2012 standard for whitewater helmets
- Meets additional off-crown impact requirements of BS EN 14052:2012 European standard for high performance industrial helmets NOTE: EN 14052 requires a low-strength chinstrap, the EXFIL® SAR is not fully certified to BS EN 14052:2012 in order to meet more rigorous chinstrap requirements of BS EN 12492:2012 and reduce the risk of losing the helmet during a fall.
- Meets Advanced Combat Helmet (ACH) Blunt Impact Protection requirements (per AR/PD 10-02 Rev A)
-
PERFORMANCE
- Meets the requirements of BS EN 12492:2012 standard for mountaineering helmets
- Meets the requirements of BS EN 1385:2012 standard for whitewater helmets
- Meets additional off-crown impact requirements of BS EN 14052:2012 European standard for high performance industrial helmets NOTE: EN 14052 requires a low-strength chinstrap, the EXFIL® SAR is not fully certified to BS EN 14052:2012 in order to meet more rigorous chinstrap requirements of BS EN 12492:2012 and reduce the risk of losing the helmet during a fall.
- Meets Advanced Combat Helmet (ACH) Blunt Impact Protection requirements (per AR/PD 10-02 Rev A)
-
PERFORMANCE Impact Performance Meets impact attenuation requirements for: ASTM F2040-18 (Recreational Snow Sports) BS EN 1077:2007 Class B (Alpine Skiing and Snowboarding)
-
- Fits in the kangaroo pouch of the SCARAB™ LT, SCARAB™ LE, LEPC, APC, or LPAC
- Holds three 5.56 magazines
- Weighs only 2 oz.
- 100% made in the USA
-
Out of stock
The EXFIL® Peltor™ quick release adapter back plate set allows you to convert a Peltor™ helmet mounting system for installation onto the Team Wendy EXFIL® Rail 2.0, EXFIL® Rail 3.0, EXFIL® SAR Rail and M-216™ Rail systems. Once converted this system allows for tool-free attachment of all Peltor™ COMTAC systems to Team Wendy rail systems.
-
Out of stock
- Works with all Peltor™ COMTAC systems and a variety of other brands and models
- Eliminates rigid metal headband, providing better fit and comfort
- Tool-free attachment directly to the quick release slot on the EXFIL® Rail 2.0, EXFIL® Rail 3.0, EXFIL® SAR Rail and M-216™ Rail systems
- Open and closed positions allow quick donning and doffing of helmet
- Wiring is easily routed in or outside the helmet shell
- Kit includes one boom microphone adapter
