-
The Helium Whisper® Medical Pouch has internal elastic webbing for organization and YKK Zipper closure with quiet Chums zipper pulls. -
The Helium Whisper® Micro Diddie Pouch is a small diddie bag or SSE pouch that can be very compactly stored when not in use. The bag measures 8.75” x 9.5” with a shock cord lined opening and cord lock synch. The entire bag rolls or stuffs into attached elastic pocket to stow when not in use. A webbing pull tab at the bottom allows for easy and quick deployment.
-
- Sleeve Option: Plain or Envelope Pockets
- Modern Rugby Style Collar
- Highly Breathable
- Enhanced wicking chemistry
- Soil Release Treatment
- Built In UV Protection - UVA: 97.98%, UVB: 89.84%
- Dynamic Stretch and Recovery
- Odorexx™ Antimicrobial
- Non-chafing Heat Seal Tagless Label
- 83% Nylon 17% Spandex
- 100% Made in the USA
-
- Modern Rugby Style Collar
- Two Envelope Pockets on the Sleeves
- Loop on Sleeve Pockets
- Highly Breathable
- Enhanced wicking chemistry
- Soil Release Treatment
- Built In UV Protection - UVA: 97.98%, UVB: 98.84%
- Dynamic Stretch and Recovery
- Odorexx™ Antimicrobial
- Non-chafing Heat Seal Tagless Label
- 83% Nylon 17% Spandex
- 100% Made in the USA
-
Comfortably and safely carry and conceal your firearms with our minimalistic KYDEX Holster design. Our KYDEX Appendix Inside the Waistband holsters provide you with full trigger guard protection and perfect retention. Utilizing a Concealment Claw, this holster is designed with the highest level of concealment in mind.
-
Out of stock
Limited Run - MultiCam and MultiCam Black Velocity Systems Hats.
-
- Used to identify friendly forces, personnel, and equipment
- Can attach to vehicles, rucksacks, hand held or laid out on the ground
- Equipped with tie down loops
- High-visibility fluorescent orange & cerise
- Lightweight, water and abrasion resistant
- VS 17 Panel is made of 200 Denier pack cloth
- Folds into confined space when not in use, allowing for easy storage and quick access
- Color: Fluorescent Orange and Cerise
- Approximate Dimensions: Small: L24”x W24” | Medium: L31”x W10” | Large: L70”x W20”
-
- Fills gap between short duration 24HR Assault Pack and full size rucksack
- Internal frame sheet
- Ergonomically shaped aluminum wire frame
- Top loading, PALS panels on the sides
- Top pocket with small electronics pocket and two daisy chains
- Two hip climbing gear attachment loops
- Two top hauling handles
- Internal VELCRO® Brand panels for gear organization and a water bladder pocket
- Webbing on top for attaching crampons of other equipment
- 100% Made in the USA
-
- Lightweight, water and abrasion resistant pack cover designed to camouflage or protect your pack from harsh elements
- Easily adjustable drawstring and cord lock closure
- Oval slide fastener at covers base for attachment to 30L Summit Pack
- Single layer and reversible Pack Cover options
- Folds into confined space when not in use, allowing for easy storage and quick access
- Pack Cover made of 70 Denier Ripstop Nylon material
- VS17 Panel sold as accessory
-
Vision
- Frameless FreeFloat™ lens for a comfortable fit and increased impact resistance
- Anti-fog and scratch-resistant coating on all lenses
- 100% UVA/B protection
- 7-base shield lens curvature offers a wraparound fit
- Super thin, moldable alloy temples fit cleanly under ear protection without breaking the seal
- Adjustable nose piece for a perfect fit
- PivLock™ interchangeable lens system makes lens changes easy
-
- Accepts Inner Belts up to 2.5” Wide
- MOLLE loops for attachment of pouches, holsters, etc.
- Padded back for cooling and comfort
- Internal attachment system that can be utilized by our Enhanced Variable Width Riggers Belt
-
- Patented swivel shoulder straps with D-ring attachments (US Patent No. 9,894,962)
- Narrow ULTRAcomp™ Shoulder Straps
- 100% Made in the USA
- Sized to hold plate of corresponding carrier size, example size large carrier holds size large ESAPI Plates
- Three (3) Cummerbund Options: SCARAB™ LT/LE Cummerbund, Low-Profile Elastic Cummerbund (CBN1) MOLLE, Plate Pocket Cummerbund (CBN3)
-
- Smaller, lighter alternative to full chest rig
- Quick attach/detach option
- Holds four 5.56 magazines
- Three general purpose pouches (loop panel on center pouch)
- Adjustable shock cord retainer with webbing pull tab
- SwiftClip® attachment system
- Placard Dimensions: W12” x D3.5” x H6.5”
- Large Front Center Pocket Dimensions: W3.87” x D1.5” x H4” not including flap closure
- Two Small Front Side Pockets Dimensions: W2.87” x D1.5” x H4” not including flap closure
- 100% Made in the USA
-
- Holds a CAT tourniquet
- Simple but durable shock cord retainer
- Weighs 0.2 oz. (6 grams)
- 100% Made in the USA
-
- The C-A-T Tourniquet (Combat Application Tourniquet) utilizes a durable windlass system with a free-moving internal band providing true circumferential pressure to the extremity.
- Once adequately tightened, bleeding will cease and the windlass is locked into place.
-
- Plate pockets are sized to accommodate Stand-Alone or ICW ESAPI or Swimmer cut plates
- S/M APC fits size Small, Medium and 10"x12" sized plates
- L/XL APC fits Large and X-Large plates
- Armor/Plates Sold Separately
- Three Cummerbund Options: Low-Profile Elastic (CBN1), Low-Profile Elastic With Dividers (CBN1D) & Standard MOLLE, Plate Pocket (CBN3)
- 100% Made in the USA
-
- Allows you to keep your layering system in an easily accessible location
- VELCRO® brand fasteners are used to attach pocket to base of a pack or carrier on the bottom of the en-velop
- Can be used in conjunction with Horizontal Rear 5.56 Magazine Pouch or by itself
- Fits the vests and carriers that have VELCRO® brand closure on bottom of plate pocket with the exception of the SCARAB and the APC
- 100% Made in the USA
-
- 3.25"L x 1.5"W x 4"H
- Grommet on the bottom for drainage
- Helium Whisper® style attachment
- Weighs only 1.4 oz.
- 100% Made in the USA
-
- Holds MBITR AN/PRC-148 or Harris AN/PRC-152 Radio
- Shock cord retainer with Small ITW Nexus quick release buckle
- Grommet at the bottom for drainage
- Helium Whisper® style attachment
- Weight: 2.8 oz.
- 100% Made in the USA
-
Out of stock
- Lightweight mission focused
- 24 hour dismounted operations
- Standalone assault pack and MOLLE compatible assault pack
- Sleeve for 2L (50oz.) hydration bladder
- Small cell phone or PDA pocket
- PALS webbing on exterior sides
- All buckles are ITW-Nexus IR
- Dimensions: L16”x W9”x D5”
- Volume: Approximately 10 Liters
- 100% Made in the USA
-
- Quick on/off pack for sustainment supplies and hydration
- Size of Back Panel corresponds to size of Carrier you purchase
- 100% Made in the USA
-
Padded gunbag to protect long guns
-
INT DIMENSION MM. L1135 W340 D70
-
Please, contact us for more information and price
-
- This insert is for use with the Magnetic Placard, MOLLE Panel and Magnetic Placard, Triple 5.56 Elastic
- Works over fleeces and light jackets
- 100% Made in the USA
-
- 49lb Rare Earth Magnets used
- Holds through the Chameleon shirt, ULV Carrier, and additional thin clothing over the armor system (ie. fleeces and light jackets)
- Dimensions: 9.5”x.5”x5.75”
- This pouch works with steel plates or the Magnetic Compatibility Insert only
- 100% Made in the USA
-
- 49lb Rare Earth Magnets used
- Holds through the Chameleon shirt, ULV Carrier, and additional thin clothing over the armor system (ie. fleeces and light jackets)
- Dimensions: 9.5”x.5”x5.75”
- This pouch works with steel plates or the Magnetic Compatibility Insert only
- 100% Made in the USA
-
Tactical gun cases for hunting guns, archery, etc. Please, contact us for more information and price
-
INT DIMENSION MM. L276 W200 D120
INT DIMENSION INC. L10 7/8 W7 7/8 D4 3/4
Please, contact us for more information and price -
Case size makes it the ideal solution to store one pistol or one ipad/compact notebook with accessories. It can be stored in vertical position. Retractable handle. Padlockable points. Please, contact us for more information and price
-
Heavy duty cases with wheels and telescopic handle. Sealing o-ring and removable lid. Available empty or with layers of pre-cubed foam in the bottom and convoluted foam in the lid. Self oiling free running wheels. Please, contact us for more information and price
-
Technical features:
- Zipper: YKK AquaSeal #10, 300mBar airtight
- Coating:Thick double sided TPU laminated
- Fabric: 840 denier 6.6 HT Nylon
- Foam:Dual density EVA shoulderstraps for comfort
- Reinforcement: Vulcanized rubber
- Frame: HDPE and EVA foam
-
Technical features:
- Zipper: 2 way lockable #10 YKK Coil
- Coating: Double sided TPU laminate base
- Fabric: 1000 denier Cordura
- Foam: Dual density EVA shoulderstraps for comfort
