- Snap-In USB-C docking cable assembly (replaces IMPCT dust cover)
- Shielded against EMI/RFI
- Closed cell foam seal provides IP-67 seal between case & connector assembly
- Overmolded strain relief
- Designed, engineered and packaged in the USA from global components
- Cables with 807 series Glenair 6 pin Mighty Mouse connector are Nett Warrior compatible
-
-
- Compatible with goTenna Pro, Pro X, and Pro X2 mesh radios (not included)
- Connects with our Source mode cable (QD or IMPCT models)
- Allows mesh network capability in an off-grid environment without cellular, Wi-Fi or satellite
- TPU jacket
- Shielded and IP67 rated when connected
- Designed, engineered and packaged in the USA from global components
-
- Dual captive thumbscrews for secure attachment
- Sealed gasket for IP-67 rated connection to case
- Shielded against EMI/RFI
- Overmolded strain relief
- Designed, engineered and packaged in the USA from global components
-
- EUD is power sink and data host
- 7.5W charge rate when attached to 5V source
- Terminates to sealed 807 series connector
- Dual captive thumbscrews for secure attachment to any SLEEV or OPRTR case model (replaces QD Door)
- Sealed gasket for IP-67 rated connection to case
- Secondary IP-67 deal to USB-C port on smartphone or tablet
- Shielded against EMI/RFI
- Overmolded strain relief
- Polyurethane jacket
- Designed, engineered and packaged in the USA from global components
- Not optimized for use with StarPan hub (please contact Glenair for Juggernaut compatible cable)
-
- Shielded Extension Cable for all Nett Warrior compatible cables with Glenair 6 pin 807 connector
- IP-67 rated
- Available in 24" or 36" lengths
- Designed, engineered and packaged in the USA from global components
- Works with any mode (Sink, Source, Power Delivery)
-
- Compatible with the Juggernaut.Case Sink Mode cables
- Ideal for connection to external batteries, computers and vehicle power sources
- Sealed on 807 connector end, but not on USB-A end
- 36" length
- PVC jacket
- Shielded, 2.0 compliant
- Designed, engineered and packaged in the USA from global components
-
JUGGERNAUT IS NOT RESPONSIBLE FOR REPLACEMENTS DUE TO INSTALLATION MISTAKES - PLEASE FOLLOW INSTRUCTIONS CAREFULLY.
- Available in standard, blue light filter technology
- Absorbs impact without cracking
- Triple layered synthetic material with 9H hardness rating
- Has the look and feel of glass
- Shatterproof technology and helps minimize chips and cracks (minor scratches are normal wear & tear)
- Blue light version blocks up to 43% of blue light from digital devices
- Includes alcohol cleaning wipe, microfiber cleaning cloth, dust stickers and instructions
- Available models: iPhone 14+, 14 Pro, 14 Pro Max
- Compatible with ENDVR and ADVNTR cases
-
You endeavor to achieve the right balance. Your work ethic is matched only by your desire to enjoy life to the fullest. You need a case with design and performance that reflect your active lifestyle. The ENDVR is our lowest profile case, created for everyday use for the active person. Designed and engineered with the same rugged DNA that Juggernaut is known for, and compatible with our full range of mount options.
- Fits iPhone 14 Pro Max (not standard, Plus, or Pro)
- Designed for devices that are already IP68 rated.
- Front-face load
- Screen protector compatible with Juggernaut SHLD
- Fits size LARGE mounts
-
You endeavor to achieve the right balance. Your work ethic is matched only by your desire to enjoy life to the fullest. You need a case with design and performance that reflect your active lifestyle. The ENDVR is our lowest profile case, created for everyday use for the active person. Designed and engineered with the same rugged DNA that Juggernaut is known for, and compatible with our full range of mount options.
- Fits iPhone 14+ Plus (not standard, Pro, or Pro Max)
- Designed for devices that are already IP68 rated.
- Front-face load
- Screen protector compatible with Juggernaut SHLD
- Fits size LARGE mounts
-
You endeavor to achieve the right balance. Your work ethic is matched only by your desire to enjoy life to the fullest. You need a case with design and performance that reflect your active lifestyle. The ENDVR is our lowest profile case, created for everyday use for the active person. Designed and engineered with the same rugged DNA that Juggernaut is known for, and compatible with our full range of mount options.
- Fits iPhone 14 Pro (not standard, Plus, or Pro Max)
- Designed for devices that are already IP68 rated.
- Front-face load
- Screen protector compatible with Juggernaut SHLD
- Fits size SMALL mounts
-
SPECS
- 2 ounces
- 4.5" x 2.75", bands in 14" and 17" lengths
- No
- 4202122120
-
- Fits Panasonic FZ-N1 (does not fit M1 or S1)
- Increased drop-protection for MIL-STD-810G
- Full access to all buttons, camera and connector ports
- Dual socket head screws with tool for secure attachment
- Designed, engineered and packaged in the USA from global components
- Fits size MEDIUM mounts
-
- Designed for all 8" and 7.5" tablet Juggernaut.Cases/SLEEVs
- Includes polymer mount interface with angled foam pad and 2-inch width leg strap
- Fastex closure system for rapid egress
- Finite adjustment with Boa Fit System for custom fit
- Integrated cable routing feature to mitigate snag for flight controls
- NSN# 5342-01-674-3022 (FDE, 8")
-
The ENDVR is our lowest profile case, created for everyday use for the active person. Designed and engineered with the same rugged DNA that Juggernaut is known for, and compatible with our full range of mount options.
- Fits Samsung Galaxy S22
- Designed for devices that are already IP68 rated
- Front-face load
- Screen protector compatible with Juggernaut SHLD
- Fits size Small mounts
-
- Intended for custom development by integrators
- Pass thru 3.1 speed
- 16 wire with cut/flying lead
- Dual captive thumbscrews for secure attachment to any SLEEV or OPRTR case model (replaces QD Door)
- Sealed gasket for IP-67 rated connection to case
- Secondary IP-67 deal to USB-C port on smartphone or tablet
- Shielded against EMI/RFI
- Overmolded strain relief
- TPE jacket
- Designed, engineered and packaged in the USA from global components
-
- EUD is power sink and data peripheral
- Terminates to sealed 807 series connector
- Dual captive thumbscrews for secure attachment to any SLEEV or OPRTR case model (replaces QD Door)
- Sealed gasket for IP-67 rated connection to case
- Secondary IP-67 deal to USB-C port on smartphone or tablet
- Shielded against EMI/RFI
- Overmolded strain relief
- Polyurethane jacket
- Designed, engineered and packaged in the USA from global components
-
- EUD is power source and data host
- Terminates to sealed 807 series connector
- Dual captive thumbscrews for secure attachment to any SLEEV or OPRTR case model (replaces QD Door)
- Sealed gasket for IP-67 rated connection to case
- Secondary IP-67 deal to USB-C port on smartphone or tablet
- Shielded against EMI/RFI
- Overmolded strain relief
- Polyurethane jacket
- Designed, engineered and packaged in the USA from global components
-
- Fits Samsung Galaxy S8 (SM-G950A)
- Designed for devices that are already environmentally sealed
- Foam gasket seal to touchscreen (no glass screen cover)
- 2M Drop Protection
- Cable housing for use with optional QD (Quick Disconnect) cables
- Compatible with size MEDIUM (5) mounts
-
- Fits standard Samsung Galaxy S10 (not Plus, E or 5G)
- Designed for devices that are already environmentally sealed
- Foam gasket seal to touchscreen (no glass screen cover)
- 2M Drop Protection
- Cable housing for use with optional QD (Quick Disconnect) cables
- Compatible with size SMALL (4.5) mounts
-
Out of stock
- Fits Samsung Galaxy S20 (does not fit S20+, S20 Ultra, S20 FE, or the Note 20 series)
- Designed for devices that are already environmentally sealed
- Foam gasket seal to touchscreen (no glass screen cover)
- 2M Drop Protection
- Cable housing for use with optional QD (Quick Disconnect) cables
- Compatible with size MEDIUM (5) mounts
- NSN #: 5895-01-694-7436
-
- Fits Samsung Galaxy S21 (does not fit S21+, S21 Ultra)
- Designed for devices that are already environmentally sealed
- Foam gasket seal to touchscreen (no glass screen cover)
- 2M Drop Protection
- Cable housing for use with optional QD (Quick Disconnect) cables
- Compatible with size MEDIUM (5) mounts
-
- Fits Samsung Galaxy Tab Active 2 Rugged Tablet (SM-T390N) without the Elastomeric Bumper
- Foam gasket seal to touchscreen (no glass screen cover)
- Rugged frame with open access to rear battery cover without removal of device
- 2M Drop Protection
- Cable housing for use with optional QD (Quick Disconnect) cables
- Compatible with Tablet-SMALL (7.5) mounts
- Rated to 9G's when installed in mounts
- S-Pen storage inset on top door of SLEEV
- NSN# 7045-01-679-7945 (FDE)
-
- Fits Samsung Galaxy Tab Active 3 Rugged Tablet without the Elastomeric Bumper
- Foam gasket seal to touchscreen (no glass screen cover)
- Rugged frame with open access to rear battery cover without removal of device
- 2M Drop Protection
- Cable housing for use with optional QD (Quick Disconnect) cables
- Compatible with Tablet-SMALL (7.5) mounts
- Rated to 9G's when installed in mounts
- S-Pen storage inset on top door of SLEEV
-
- Compatible with limited IMPCT models
- Designed to emulate a desktop environment for vehicle operations, or provide a robust mounting/charging solution
- Allows user connectivity to hubs for operation of full-size display, keyboard, mouse and Ethernet network connection (like this Tough-Hub from RAM)
- Leverages Samsung DeX Mode (Desktop Experience) with the USB-C Female configuration (JG.CBL.DOCK.ICF)
- Other cable options provide charge (JG.CBL.DOCK.IA & JG.CBL.DOCK.ICM)
- Mount compatible with AMPS pattern or RAM 2x3 Ball Mount (not included)
- EMI/RFI shielding within cable to reduce signal interference in high noise environments
- Crash tested
