-
The Helium Whisper® Micro Diddie Pouch is a small diddie bag or SSE pouch that can be very compactly stored when not in use. The bag measures 8.75” x 9.5” with a shock cord lined opening and cord lock synch. The entire bag rolls or stuffs into attached elastic pocket to stow when not in use. A webbing pull tab at the bottom allows for easy and quick deployment.
-
- Fills gap between short duration 24HR Assault Pack and full size rucksack
- Internal frame sheet
- Ergonomically shaped aluminum wire frame
- Top loading, PALS panels on the sides
- Top pocket with small electronics pocket and two daisy chains
- Two hip climbing gear attachment loops
- Two top hauling handles
- Internal VELCRO® Brand panels for gear organization and a water bladder pocket
- Webbing on top for attaching crampons of other equipment
- 100% Made in the USA
-
- Allows you to keep your layering system in an easily accessible location
- VELCRO® brand fasteners are used to attach pocket to base of a pack or carrier on the bottom of the en-velop
- Can be used in conjunction with Horizontal Rear 5.56 Magazine Pouch or by itself
- Fits the vests and carriers that have VELCRO® brand closure on bottom of plate pocket with the exception of the SCARAB and the APC
- 100% Made in the USA
-
Out of stock
- Lightweight mission focused
- 24 hour dismounted operations
- Standalone assault pack and MOLLE compatible assault pack
- Sleeve for 2L (50oz.) hydration bladder
- Small cell phone or PDA pocket
- PALS webbing on exterior sides
- All buckles are ITW-Nexus IR
- Dimensions: L16”x W9”x D5”
- Volume: Approximately 10 Liters
- 100% Made in the USA
-
Weight: 950 g Dimensions: L55cm x W30cm x H32cm / L21.5” x W12” x H12.5” Precise Volume: 50 Liters / 3050 CU IN Design features:
- Quick release shoulder straps with 2M ROC buckles
- Inner side-wall zippered pockets
- Carry handles on each short end
- Lightweight & waterproof 420 denier HT Nylon fabric with double TPU coating
- Rubberized reinforcement fabric with embossed Halite logo on the bottom
- TIZIP® #10 MasterSeal Waterproof Zipper (500 mbar)
- RF Welded waterproof construction
- Deflation valve
-
Weight: 1400g Dimensions: L63 × W36 × H28 cm Precise volume: 61L Design Features:
- 2 carry handles on each end
- Daisy chain on both sides for quick attachment
- Adjustable and removable shoulderstaps
- Safe and lockable zipperhead for flights
- Oral valve to compress or inflate with air
- Zipper:YKK Aquaseal #10, 300mBar airtight
- Coating:Double sided TPU laminate
- Fabric:840 denier 6.6 HT Nylon main. 420 6.6 HT Nylon side
- Foam:Dual density EVA shoulderstraps for comfort
-
Weight: 1750g Dimensions: L70 × W43 × H32 cm Design Features:
- 2 carry handles on each end
- Daisy chain on both sides for quick attachment
- Adjustable and removable shoulderstaps
- Safe and lockable zipperhead for flights
- Oral valve to compress or inflate with air
- Zipper:YKK Aquaseal #10, 300mBar airtight
- Coating:Double sided TPU laminate
- Fabric:840 denier 6.6 HT Nylon main. 420 6.6 HT Nylon side
- Foam:Dual density EVA shoulderstraps for comfort
-
- Attaches to the sternum strap of an MFF Container (MC-4, Javelin or RA-1) or a Tandem-Rig
- Adjustable friction hinge
- Cordura sleeve with padded spacer mesh back
- Includes webbing strap to route through backpack straps
- Only available in FDE (flat dark earth)
- Berry compliant (Made in USA)
- NSN# 5895-01-684-2780 (FDE, 5")
-
- Fits Galaxy S10E – does not fit S10, S10+ or S10 5G
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
-
- Fits Galaxy S20 – does not fit 20+, 20 Ultra, 20 FE or Note 20
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
-
- Fits Galaxy S20 Ultra – does not fit 20, 20+, 20 FE or Note 20, Note 20 Ultra
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size LARGE (5.5) mounts
-
- Fits Galaxy S20+ (PLUS) – does not fit standard 20, S20 FE, 20 Ultra or Note 20
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
-
Out of stock
- Kit includes tablet SLEEV
- Robust, ergonomic two-strap kneeboard mount
- Withstands the 650kt blast during ejection from a fixed wing aircraft (EjectionSeat Windblast Tested/Approved)
- Tablet case is bolted into the mount platform
- Secondary 1" strap to keep the EKB from sliding down the pilot's leg during normal egress from the cockpit
- Underside of mount is padded with ToughTek No-Slip material
- Features ITW-Cobra Buckles on leg straps
- NSN# 7045-01-676-9842 (FDE, 7.5"), 7045-01-677-0426 (FDE, 8")
-
- Ruggedized polymer HAHO freefall accessory
- Integrates with PALS Armor Mount or HAHO Sternum Mount, and any of our smartphone case models (sold separately)
- 5 series fits the 4.5" and 5" PALS or HAHO sternum mounts. 6 series fits the 5.5" and 6" PALS or HAHO sternum mounts
- Includes red LED back lit oil-filled Oceanic compass
- Provides mounting tabs for Garmin GPS 401/601/701 (Garmin not included – optional add-on)
- Provides low-profile, stowable hinged platform for use under canopy
- Allows for situational awareness and visibility of landing zone
- Can be used as stand-alone device when routed through container strap (not typically a military approved configuration)
- NSN# 5895-01-671-8314 (FDE, 5"), 5340-01-672-6079 (FDE, 6")
-
Out of stockGALAXY S8
- Fits Samsung Galaxy S8 (SM-G950A) – standard size, not plus
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
- Fits Samsung Galaxy S8+ (PLUS)
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
-
Galaxy S9
- Fits Samsung Galaxy S9 (SM-G960A) – standard size, not plus
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
- Fits Samsung Galaxy S9+ (PLUS)
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
- NSN# 8115-01-672-6050 (FDE)
-
Iphone 11
- Fits iPhone 11 – does not fit 11Pro or 11 Pro Max
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size MEDIUM (5) mounts
- Fits iPhone 11 Pro – does not fit 11 or 11 Pro Max
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
-
- Fits iPhone 11 Pro Max – does not fit 11 or 11 Pro
- Designed for devices that are already environmentally sealed
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size LARGE (5.5) mounts
-
Out of stockiPhone 7 & 8
- Fits iPhone 7 & 8 – standard size, not plus (ALSO FITS THE iPHONE SE 2020)
- Designed for devices that are already environmentally sealed (also fits iPhone 6, which is not a sealed device)
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size SMALL (4.5) mounts
- Fits iPhone 7+ & 8+ (PLUS)
- Designed for devices that are already environmentally sealed (Also fits 6+ which is not a sealed device)
- Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design
- Top loading design with snap in top cover and removable bottom dust cap
- Compatible with size LARGE (5.5) mounts