-
The Vastus System from 9Toes Design is a lightweight thigh band mod that will work with any drop-leg system sporting a Safariland hole pattern. The system keeps your thigh strap dropped below the holster and belt mount for a more comfortable fit that prevents the strap from riding up the leg. -
Adjustable circumference, with a regulating strap and easy off buckle. Keep your holster tight to your thigh and body.
-
- Quick on/off pack for sustainment supplies and hydration
- Size of Back Panel corresponds to size of Carrier you purchase
- 100% Made in the USA
-
- Attaches to the sternum strap of an MFF Container (MC-4, Javelin or RA-1) or a Tandem-Rig
- Adjustable friction hinge
- Cordura sleeve with padded spacer mesh back
- Includes webbing strap to route through backpack straps
- Only available in FDE (flat dark earth)
- Berry compliant (Made in USA)
- NSN# 5895-01-684-2780 (FDE, 5")
-
The ANR DESIGN LLC Tactical Belt Mount System was designed as a solution to applying maximum cant to a holster system. Many Safariland ALS holsters are at a fixed 15 degree forward cant causing ingress of foreign material into the optics shroud, rendering the optic unusable.
-
- Used to identify friendly forces, personnel, and equipment
- Can attach to vehicles, rucksacks, hand held or laid out on the ground
- Equipped with tie down loops
- High-visibility fluorescent orange & cerise
- Lightweight, water and abrasion resistant
- VS 17 Panel is made of 200 Denier pack cloth
- Folds into confined space when not in use, allowing for easy storage and quick access
- Color: Fluorescent Orange and Cerise
- Approximate Dimensions: Small: L24”x W24” | Medium: L31”x W10” | Large: L70”x W20”
-
The Ridgeline Drop Offset, Pouch (DrOP) was originally designed to increase Operator comfort by moving belt mounted magazine pouches lower and slightly offset, to clear body armor and provide a less impinged range of motion during reloads. Designed and manufactured in the USA, the DrOP mounts to the belt using TekLok style attachments, and is compatible with most pouch types (ANR, TYR, HSGI, ESSTAC, GCODE, etc. ) or any Kydex utilizing a TekLok Pattern.
-
- Three viewable surfaces
- Flap viewable on both sides and the base
- Weighs less than 2oz.
- 100% Made in the USA
-
- Carries minimum amount of kit for short duration missions
- Carries 50-70oz water bladders
- Upper zipper pouch holds SOCOM issued NVG protective insert
- Removable medical pouch
- Attachment: PALS compatible Helium Whisper® system
- 100% Made in the USA
-
Out of stock
- Measures 8' by 6' 8"
- Camouflage on both sides
- Reinforced button holes around edges every 2' for attachment
- Easily folds for smaller use
- Hood in one corner for use as a personal poncho
- Compacts very small into included 8" by 6" drawstring bag
- Weighs 15oz.
- 100% Made in the USA
-
Out of stock
- Elastic slick design for low profile use
- Two dividers included to provide extra storage for mag, tourniquets and small med kits
- Velcro® Brand One-Wrap® Fingers
- A quantity of (1) is a complete cummerbund with a right and left side
- 100% Made in the USA
-
Out of stock
- Lightweight mission focused
- 24 hour dismounted operations
- Standalone assault pack and MOLLE compatible assault pack
- Sleeve for 2L (50oz.) hydration bladder
- Small cell phone or PDA pocket
- PALS webbing on exterior sides
- All buckles are ITW-Nexus IR
- Dimensions: L16”x W9”x D5”
- Volume: Approximately 10 Liters
- 100% Made in the USA
-
- Holds a CAT tourniquet
- Simple but durable shock cord retainer
- Weighs 0.2 oz. (6 grams)
- 100% Made in the USA
-
- Attaches via Helium Whisper® attachment system
- Designed to hold up to .75” thick side plates
- Designed to attach to most MOLLE compatible cummerbunds
- Can be worn on the inside or outside of the cummerbund depending on location of MOLLE and user preference
- Plate is secured with a foldable 500D Cordura flap that adheres with a hook and look fastener
- Set (Right and Left Plate Pocket)
- Weight: 2.08oz
- Material: 500D Cordura Nylon
- 100% made in the USA
-
Out of stock
- Allows auxiliary equipment to swiftly clip on or off your base component
- Accept any items with an ITW 1" male side release buckle
- 100% Made in the USA
-
- Measures 8' by 6' 8"
- Camouflage on one side and dark green on the other
- Reinforced button holes around edges every 2' for attachment
- Easily folds for smaller use
- Hood in one corner for use as a personal concealment
- Compacts very small into included 8" by 6" drawstring bag
- Weighs 13.5oz.
- 100% Made in the USA
-
Specifications: Maximum White-Light Output: 200 lumens Runtime: 10 hours 320 Degree Rotating Head Constructed from Proprietary Polymers Weight: 4.4 ounces Dimensions: 3.9"H x 2.6"L x 1.4"W
-
- Convert any carrier with molle on front and rear, to a carrier with front flap access and an adjustable cummerbund
- Flaps have molle webbing on outside, no webbing space is lost
- Interior mesh pockets with plate straps hold 6"x"6 or 6"x8" side armor inserts
- 100% Made in the USA
-
- Lightweight, low profile cummerbund replacement option
- 2 Quick Release Buckles
- 1½ ” Webbing
- 100% made in the USA
-
- Secure larger plates in cummerbund
- 500D Cordura
- Hook and loop
- Sold as a set (2 right and left)
- 100% Made in the USA
-
- Can be setup for dual or single Quarter Flap opening
- Provides 6”x6” Side Plate pockets
- Allows for easy reconfiguration for mission specific needs
- 100% Made in the USA
-
Spare Rubber Boots for your Javelin bipod, Sentinel and Ascent tripods.
- Sold in a pack of three
-
Set of three replacement feet for Javelin bipods, Valhalla bipods, Sentinel and Ascent tripods.
-
- CNC machined from 7075-T7351 aluminium billet with a hard-anodised black finish
-
Enables use of our Javelin Bipod in fixed target and traversable hunting modes
- Compatible with hunting rifles that use a standard removable sling swivel stud
-
Secure sling attachment
-
Ferritic stainless steel screws for installation of our Classic Rifle Adapter. M5/METRIC 20mm, 23mm & 27mm UNF/IMPERIAL 1/2", 5/8", 10/32", 7/8", 1" & 1/32" Wood Screw M5.7 x 20mm
-
Built from mil-spec webbing, this is a no nonsense piece of gear that does one thing well. It keeps your Javelin bipod on your belt, within reach, ready for action. The bipod sits securely in the webbing loop, and we've added an elastic bungee to keep it from bouncing around.
- Weighs just 20g / 0.6oz
- Designed by our friends at RedKettle
-
Pack of three claw feet. Make sure your bipod or tripod doesn’t slip in difficult weather conditions. A pack of three claw feet will provide extra grip and support.
-
-
Simple, strong fixed height legs, available in three heights
-
Made from 7075 hard anodised aluminium and high quality carbon fibre for lightweight, corrosion resistance and strength
-
Durable tungsten carbide tips with tethered synthetic boots to enhance grip on all terrains
-
-
-
Lightweight, simple and reliable twist lock Pro Legs for easy height adjustment and flexibility in varying terrain
- Durable tungsten carbide tips with tethered synthetic boots to enhance grip on all terrains
-
Made from 7075 hard anodised aluminium and high-quality carbon fibre for lightweight, corrosion resistance and strength
-
-
-
Spring-assisted height adjustment
-
Durable tungsten carbide tips with tethered synthetic boots to enhance grip on all terrains
-
Made from 7075 hard anodised aluminium and high quality carbon fibre for lightweight, corrosion resistance and strength
-
-
Thanks to its magnetised fitting, the Quick Shot Rest attaches to the Spartan tripods or Davros head quickly and easily. It functions like a traditional gun rest, allowing you to take aim from any position. The design incorporates a tactile rubber finish, holding your rifle securely.
Weight 35g / 1.2oz -
-
CNC machined from 6061 aluminium with a hard-anodised black finish
-
Three 3/8”-16 threaded holes and four 1/4”-20 threaded holes for mounting attachments to the clamp
-
Fine and coarse control adjustment knobs
-
