-
SPECS
- 4.4 ounces, 7.02" x 3.58" x 0.69"
- Not applicable
- 4202122120
- USA
- MEDIUM
-
- 3.6 - 4.4 ounces depending on size
- Small = 6.25" x 5.5" x 1.25", Medium = 6.25" x 6.5" x 1.25"
- Not applicable
- 4202122120
- USA
-
- Measures 8' by 6' 8"
- Camouflage on one side and dark green on the other
- Reinforced button holes around edges every 2' for attachment
- Easily folds for smaller use
- Hood in one corner for use as a personal concealment
- Compacts very small into included 8" by 6" drawstring bag
- Weighs 13.5oz.
- 100% Made in the USA
-
The DPM Telescopic Recoil System is a direct replacement for the stock recoil rod and does not change the configuration of the pistol. As always, DPM products are designed and developed with user’s safety as a priority. Exceptional manufacturing and engineering using high-end materials. Important Notice: The Washer is an optional installation for cosmetic reasons, not mandatory. For P365 - 380 add to the comments upon ordering "For 380 Version" as it needs custom system.
*B.O.S.S: Black Oxide Stainless Steel its an innovative coating technology applied usually on the visible parts of the recoil system.
-
- Articulating mounting platform for integration with select model Juggernaut cases (see Complete Your Kit section below)
- Includes red LED back lit oil-filled Oceanic compass
- Provides mounting tabs for Garmin GPS 401/601/701 (Garmin not included)
- Includes integrated case heater with CR123 Battery_Module/Cable
- Incorporates stylus holder with tether
- Provides low-profile, stowable hinged platform for use under canopy
- Allows for situational awareness and visibility of landing zone
- Only available in black
- Designed, engineered and packaged in the USA from global components
- Standard lead time is 12-14 weeks
-
- Snap-In USB-C docking cable assembly (replaces IMPCT dust cover)
- Shielded against EMI/RFI
- Closed cell foam seal provides IP-67 seal between case & connector assembly
- Overmolded strain relief
- Designed, engineered and packaged in the USA from global components
- Cables with 807 series Glenair 6 pin Mighty Mouse connector are Nett Warrior compatible
-
- Compatible with goTenna Pro, Pro X, and Pro X2 mesh radios (not included)
- Connects with our Source mode cable (QD or IMPCT models)
- Allows mesh network capability in an off-grid environment without cellular, Wi-Fi or satellite
- TPU jacket
- Shielded and IP67 rated when connected
- Designed, engineered and packaged in the USA from global components
-
- Terminates to standard commercial USB-A connector (not sealed on that end)
- Dual captive thumbscrews for secure attachment to any SLEEV or OPRTR case model (replaces QD Door)
- Sealed gasket for IP-67 rated connection to case
- Secondary IP-67 deal to USB-C port on smartphone or tablet
- Shielded against EMI/RFI
- Overmolded strain relief
- PVC jacket
- Designed, engineered and packaged in the USA from global components
-
- Dual captive thumbscrews for secure attachment
- Sealed gasket for IP-67 rated connection to case
- Shielded against EMI/RFI
- Overmolded strain relief
- Designed, engineered and packaged in the USA from global components
-
- EUD is power sink and data host
- 7.5W charge rate when attached to 5V source
- Terminates to sealed 807 series connector
- Dual captive thumbscrews for secure attachment to any SLEEV or OPRTR case model (replaces QD Door)
- Sealed gasket for IP-67 rated connection to case
- Secondary IP-67 deal to USB-C port on smartphone or tablet
- Shielded against EMI/RFI
- Overmolded strain relief
- Polyurethane jacket
- Designed, engineered and packaged in the USA from global components
- Not optimized for use with StarPan hub (please contact Glenair for Juggernaut compatible cable)
-
- Shielded Extension Cable for all Nett Warrior compatible cables with Glenair 6 pin 807 connector
- IP-67 rated
- Available in 24" or 36" lengths
- Designed, engineered and packaged in the USA from global components
- Works with any mode (Sink, Source, Power Delivery)
-
- Compatible with the Juggernaut.Case Sink Mode cables
- Ideal for connection to external batteries, computers and vehicle power sources
- Sealed on 807 connector end, but not on USB-A end
- 36" length
- PVC jacket
- Shielded, 2.0 compliant
- Designed, engineered and packaged in the USA from global components
-
SPECS
- 5.9 - 6.1 ounces depending on size
- 5.2" W x 5.86 H (total height includes installed retention tab)
- Yes
- 4202122120
- USA
-
TECHNICAL SHEET
WEIGHT G.: 140WEIGHT OZ.: 4,9BLADE LENGTH (MM): 66BLADE LENGTH (IN): 2.6TOTAL LENGTH (MM): 190TOTAL LENGTH (IN): 7,5BLADE THICKNESS (MM): 3BLADE THICKNESS (IN): 0,12BLADE MATERIAL: BÖHLER N690 STEEL (58HRC)BLADE FINISHING: STONE WASHEDMAIN GRIND: FLATHANDLE MATERIAL: ANTICORODAL ANODIZED ALUMINUMSCREWDRIVER / MARLIN SPIKE MATERIAL: INOX STEEL -
TECHNICAL SHEET
WEIGHT G.: 140WEIGHT OZ.: 4,93BLADE LENGTH (MM): 90BLADE LENGTH (IN): 3.54TOTAL LENGTH (MM): 215TOTAL LENGTH (IN): 8,46BLADE THICKNESS (MM): 3BLADE THICKNESS (IN): 0,11BLADE MATERIAL: BÖHLER N690 STEEL (58HRC)BLADE FINISHING: MIL-C-13924 BURNISHINGMAIN GRIND: FLATHANDLE MATERIAL: ANTICORODAL ANODIZED ALUMINUM -
TECHNICAL SHEET
WEIGHT G.: 143WEIGHT OZ.: 5,04BLADE LENGTH (MM): 87BLADE LENGTH (IN): 3.42TOTAL LENGTH (MM): 210TOTAL LENGTH (IN): 8,26BLADE THICKNESS (MM): 3BLADE THICKNESS (IN): 0,12BLADE MATERIAL: BÖHLER N690 STEEL (58HRC)BLADE FINISHING: STONE WASHEDMAIN GRIND: FLATPARTIAL SERRATION (MM): 40PARTIAL SERRATION (IN): 1,57HANDLE MATERIAL: ANTICORODAL ANODIZED ALUMINUM -
TECHNICAL SHEET
WEIGHT G.: 82WEIGHT OZ.: 2.8BLADE LENGTH (MM): 70BLADE LENGTH (IN): 2.75TOTAL LENGTH (MM): 153TOTAL LENGTH (IN): 6BLADE THICKNESS (MM): 6.3BLADE THICKNESS (IN): 0.25BLADE MATERIAL: BÖHLER N690 STEEL (58HRC)BLADE FINISHING: BLACKMAIN GRIND: FLATHANDLE MATERIAL: BÖHLER N690 STEEL (58HRC) -
TECHNICAL SHEET
WEIGHT G.: 69WEIGHT OZ.: 2.4BLADE LENGTH (MM): 50BLADE LENGTH (IN): 1.9TOTAL LENGTH (MM): 128TOTAL LENGTH (IN): 5BLADE THICKNESS (MM): 6,3BLADE THICKNESS (IN): 0.25BLADE MATERIAL: BÖHLER N690 STEEL (58HRC)BLADE FINISHING: BLACKMAIN GRIND: FLATHANDLE MATERIAL: BÖHLER N690 STEEL (58HRC) -
TECHNICAL SHEET
WEIGHT G.: 56WEIGHT OZ.: 2BLADE LENGTH (MM): 51BLADE LENGTH (IN): 2TOTAL LENGTH (MM): 129TOTAL LENGTH (IN): 5,1BLADE THICKNESS (MM): 3BLADE THICKNESS (IN): 0,12BLADE MATERIAL: BÖHLER N690 STEEL (58HRC)BLADE FINISHING: BLACKMAIN GRIND: RAZORHANDLE MATERIAL: BÖHLER N690 STEEL (58HRC) -
JUGGERNAUT IS NOT RESPONSIBLE FOR REPLACEMENTS DUE TO INSTALLATION MISTAKES - PLEASE FOLLOW INSTRUCTIONS CAREFULLY.
- Available in standard, blue light filter technology or two-way privacy* protection
- Absorbs impact without cracking
- Triple layered synthetic material with 9H hardness rating
- Has the look and feel of glass
- Shatterproof technology and helps minimize chips and cracks (minor scratches are normal wear & tear)
- Blue light version blocks up to 43% of blue light from digital devices
- Privacy version obscures your screen when viewed from the side
- Includes alcohol cleaning wipe, microfiber cleaning cloth, dust stickers and instructions
- Available models: Galaxy S22, S22+, S22 Ultra
- Compatible with ENDVR, ADVNTR and OPRTR cases
-
JUGGERNAUT IS NOT RESPONSIBLE FOR REPLACEMENTS DUE TO INSTALLATION MISTAKES - PLEASE FOLLOW INSTRUCTIONS CAREFULLY.
- Available in standard, blue light filter technology
- Absorbs impact without cracking
- Triple layered synthetic material with 9H hardness rating
- Has the look and feel of glass
- Shatterproof technology and helps minimize chips and cracks (minor scratches are normal wear & tear)
- Blue light version blocks up to 43% of blue light from digital devices
- Includes alcohol cleaning wipe, microfiber cleaning cloth, dust stickers and instructions
- Available models: iPhone 14+, 14 Pro, 14 Pro Max
- Compatible with ENDVR and ADVNTR cases
-
Adventure is part of your core being. With the heart of an adrenaline junkie, you’ve built your career and your personal life around the persistent quest for excitement. The ADVNTR is an evolution of our IMPCT model. We compiled all the feedback from extreme sportsmen, law enforcement, federal agencies, and first responders into a new design engineered to offer superior drop protection and mounting capability with additional grip and no loose components.
- Fits iPhone 14 Pro Max (does not fit standard, Plus, or Pro)
- Designed for devices that are already IP68 rated.
- Top load with secure latch
- Screen protector compatible with Juggernaut SHLD
- Lanyard attachment points
- Fits size X-LARGE mounts
-
Adventure is part of your core being. With the heart of an adrenaline junkie, you’ve built your career and your personal life around the persistent quest for excitement. The ADVNTR is an evolution of our IMPCT model. We compiled all the feedback from extreme sportsmen, law enforcement, federal agencies, and first responders into a new design engineered to offer superior drop protection and mounting capability with additional grip and no loose components.
- Fits iPhone 14 Pro (does not fit standard, Plus, or Pro Max)
- Designed for devices that are already IP68 rated.
- Top load with secure latch
- Screen protector compatible with Juggernaut SHLD
- Lanyard attachment points
- Fits size MEDIUM mounts
-
Additional shipping cost for second shipments
-
You endeavor to achieve the right balance. Your work ethic is matched only by your desire to enjoy life to the fullest. You need a case with design and performance that reflect your active lifestyle. The ENDVR is our lowest profile case, created for everyday use for the active person. Designed and engineered with the same rugged DNA that Juggernaut is known for, and compatible with our full range of mount options.
- Fits iPhone 14 Pro Max (not standard, Plus, or Pro)
- Designed for devices that are already IP68 rated.
- Front-face load
- Screen protector compatible with Juggernaut SHLD
- Fits size LARGE mounts
-
You endeavor to achieve the right balance. Your work ethic is matched only by your desire to enjoy life to the fullest. You need a case with design and performance that reflect your active lifestyle. The ENDVR is our lowest profile case, created for everyday use for the active person. Designed and engineered with the same rugged DNA that Juggernaut is known for, and compatible with our full range of mount options.
- Fits iPhone 14+ Plus (not standard, Pro, or Pro Max)
- Designed for devices that are already IP68 rated.
- Front-face load
- Screen protector compatible with Juggernaut SHLD
- Fits size LARGE mounts
-
You endeavor to achieve the right balance. Your work ethic is matched only by your desire to enjoy life to the fullest. You need a case with design and performance that reflect your active lifestyle. The ENDVR is our lowest profile case, created for everyday use for the active person. Designed and engineered with the same rugged DNA that Juggernaut is known for, and compatible with our full range of mount options.
- Fits iPhone 14 Pro (not standard, Plus, or Pro Max)
- Designed for devices that are already IP68 rated.
- Front-face load
- Screen protector compatible with Juggernaut SHLD
- Fits size SMALL mounts
-
SPECS
- 3.75 to 4.25 ounces depending on size
- Approximately 4" x 4.5" x 1.5" depending on size
- Not applicable
- 4202122120
- USA
-
SPECS
NEW DESIGN- Circumference range from 10" - 17"
- Approximately 7.23 ounces (depending on size)
- Yes
- 4202122120
- USA
-
SPECS
- 2 ounces
- 4.5" x 2.75", bands in 14" and 17" lengths
- No
- 4202122120
-
- Keylock nose stops the carabiner from snagging when un-clipping and allows release even when under tension: On notched noses the notch catches on slings and webbing and if they are under load it is much harder to release them.
- Patented Taperlock nose increases push-in strength and helps the carabiner achieve high strengths.
- Barrel on the gate cannot be overtightened onto the nose of the carabiner: If this happens and the carabiner is then loaded it can be very difficult to undo the gate afterward.
- Offset D shape is optimised for improved ergonomics whilst maximising safety: The steep angles on the top and bottom bars drive loads into the back bar where the carabiner is strongest.
- Excellent corrosion resistance, especially with the black electrophoretic coating.
- All carabiners marked with individual serial number for full traceability.
- Hot forging the back allows us to move metal to where it is needed: This creates an I-Beam structure this is strong and light.
- Can be fitted with an RFID chip if required.
- Can be fitted with a captive bar if required.
-
- Strong, safe and secure
- One handed operation for ease of use
- Top ‘shelf’ allows in-situ gear selection
- Low nose profile minimises hook-ups
- Can be set to either the unlocked or locked position
- Max webbing size: 45 x 3mm
- WLL 3kN - Not PPE
- User installable - flat bladed screwdriver required
