•   DIMENSIONS:  3.12″(L) x 1.01″(W) x 1.58″(H) WEIGHT:  3.2 oz. MATERIAL:  7075-T6 Aluminum COATING:  Type III Hardcoat Anodized MOUNT TYPE:  Rail Grabber or QD Lever (sold separately) COMPATIBILITY: (Direct) Aimpoint CompM4, Comp M4s, (w/ Aimpoint 30mm Top Ring P/N 12194) Aimpoint PRO, ACO, CompM3, CompML3, CompM2, CompML2   *NOTE* “FDE” is used throughout our catalog to reference a spectrum of colors that include tan, brown, bronze, earth, and everything in between. Due to the chemical process that takes place during Type III Hardcoat, the final finish can vary from part to part (even parts done in the same batch). Therefore, your “FDE” product may vary from other parts from UNITY and other companies, and may vary from the photos shown online.
  • AXON™

    224,00433,00
  •   DIMENSIONS:  2.08″(L) x 1.20″(W) x 1.81″(H) WEIGHT:  3.2 oz. MATERIAL:  7075-T6 Aluminum COATING:  Type III Hardcoat Anodized MOUNT TYPE:  Rail Grabber or QD Lever (sold separately) COMPATIBILITY: Trijicon MRO, MRO-HD   *NOTE* “FDE” is used throughout our catalog to reference a spectrum of colors that include tan, brown, bronze, earth, and everything in between. Due to the chemical process that takes place during Type III Hardcoat, the final finish can vary from part to part (even parts done in the same batch). Therefore, your “FDE” product may vary from other parts from UNITY and other companies, and may vary from the photos shown online.
  •     DIMENSIONS:  2.25″(L) x 2.64″(W) x 3.42″(H) WEIGHT:  4.4 oz. MATERIAL:  7075-T6 Aluminum COATING:  Type III Hardcoat Anodized MOUNT TYPE:  QD Lever COMPATIBILITY: EOTech G23, G30, G33, G43, G45 Vortex Optics VMX-3T, Micro3X, Micro6X Trijicon 3X MAG-C Sig Sauer Juliet3X, Juliet4X, Juliet Micro3X
  •   TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one point command and control system for all weapon-mounted electronics. It provides low profile, dual-device control for lights and lasers. TAPS allows placement of weapon accessories in optimal location while providing a single point of actuation of the operator’s choosing. Rather than needing to place both light and laser where they can be activated directly, or needing to find places for multiple remote pressure pads while securing loose cables, TAPS literally places control at the operator’s fingertips in a single, user-friendly package.
  • Out of stock
      TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one point command and control system for all weapon-mounted electronics. It provides low profile, dual-device control for lights and lasers. TAPS mounts directly to any industry standard rail, including M1913 Picatinny, KEYMOD, and M-LOK. No third party rail adapters are needed, keeping the weapon lighter and sleeker. It features two on-board buttons and two accessory leads. Available in 4 button configurations, TAPS SYNC utilizes a patented double pole dome switch to fire both devices simultaneously on isolated circuits to protect your devices. Meets MIL-STD-801G(1)-512.6     TAPS SYNC - Variants Description
  • Out of stock

    TAPS DBAL

    220,00
      TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one-point command and control system for weapon-mounted electronics. It provides low profile, dual-device control for Surefire/Modlite weapon lights and Steiner DBAL lasers. TAPS-DBAL mounts directly to any industry standard rail, including M1913 Picatinny, KEYMOD, and M-LOK. No third party rail adapters are needed, keeping the weapon lighter and sleeker. It features two on-board buttons and three accessory leads. TAPS-DBAL is designed specifically for use with Steiner DBAL-A3 and A4 models along side Surefire and Modlite weapon lights.    
  •  
    WEIGHT 0.10 lbs
    DIMENSIONS 1.1 × 3.8 × 5.7 in
  •   Designed specifically for the FUSION Micro Hub, the FUSION LightWing Adapter allows the user to mount both a backup iron sight and light in conjunction with the ATPIAL or ATPIAL-C Multi-Function Aiming Laser. The FUSION LightWing adapter is designed to extend the light out under the side of the ATPIAL while still mounting on the top rail. It is lightweight, low profile and compatible with a wide range of FUSION accessories. Mounting the unit behind the ATPIAL still allows access to the battery compartment without removing either unit. Note: This part comes in both Left and Right side versions, however either side can be used ambidextrously depending on where the Micro Hub is placed. A Left Hand LightWing Adapter will put the light on the left side of the ATPIAL if the Micro Hub is mounted behind the ATPIAL. If the Micro Hub is mounted in front of the ATPIAL, a Left Hand ATPIAL Adapter can be reversed and used on the right side of the weapon.
  •   The FUSION Fixed Backup Iron Sight attaches directly to the FUSION Micro Hub.  It provides a standard height front sight, and utilizes an off-the-shelf front sight post that can be replaced by the end user if desired.  The Fixed Backup Iron Sight is compatible with all standard AR15 rear BUIS, and is fully adjustable for Elevation.  Its serrated rear surface is designed to reduce glare in extreme sunlight.
  •   The FUSION Folding Backup Iron Sight attaches directly to the FUSION Micro Hub.  It provides a standard height front sight when in the up position and utilizes an off-the-shelf front sight post that can be replaced by the end user if desired.  The Folding Backup Iron Sight is compatible with all standard AR15 rear BUIS, and is fully adjustable for Elevation.
  •   Originally developed with Kyle Lamb for Viking Tactics, the Micro Hub was a smaller, streamlined version of our original FUSION hub. Now even further refined, the Micro Hub 2.0 adds even more versatility and deeper integration with light and laser systems. NOTE: FUSION Micro Hub 2.0 will allow direct top mount with Steiner® DBAL-A2, DBAL-A3, DBAL-I2.  It will NOT interface with DBAL-D2 and DBAL-A4. Micro Hub 2.0 Updates: – Recoil lug – Improved integration with the BE Meyers MAWL – Direct mounting of Steiner Lasers on top surface – Improved integration w/LightWing & PEQ-15/a Lasers
  • Out of stock
      Hot Button is a revolutionary control device for weapon-mounted electronic accessories. Developed out of a need to conserve rail-estate, improve actuation ergonomics, and mechanically integrate with weapon fore ends, Hot Button has successfully reinvented how you interface with your lights and lasers.
  •   Hot Button is a revolutionary control device for weapon-mounted electronic accessories. Developed out of a need to conserve rail-estate, improve actuation ergonomics, and mechanically integrate with weapon fore ends, Hot Button has successfully reinvented how you interface with your lights and lasers.
  • Out of stock
     
    Optional QD lever for FAST Micro Mounts.  FAST Magnifier Mount Series comes with this lever pre-installed.  Not compatible FAST Optic Riser.
  •  
    WEIGHT 0.2 lbs
    DIMENSIONS 2 × 1.3 × 2 in
    COLOR Black, FDE*
     
    * “FDE” is used throughout our catalog to reference a spectrum of colors that include tan, brown, bronze, earth, and everything in between. Due to the chemical process that takes place during Type III Hardcoat, the final finish can vary from part to part (even parts done in the same batch). Therefore, your “FDE” product may vary from other parts from UNITY and other companies, and may vary from the photos shown online.

  •  
    WEIGHT 0.2 lbs
    DIMENSIONS 1.45 × 2.38 × 3.2 in
    COLOR Black, FDE*
  •  
    WEIGHT 0.2 lbs
    DIMENSIONS 2 × 1.3 × 2 in
    COLOR Black, FDE*
     
    * “FDE” is used throughout our catalog to reference a spectrum of colors that include tan, brown, bronze, earth, and everything in between. Due to the chemical process that takes place during Type III Hardcoat, the final finish can vary from part to part (even parts done in the same batch). Therefore, your “FDE” product may vary from other parts from UNITY and other companies, and may vary from the photos shown online.
  •  
    WEIGHT 0.6 lbs
    DIMENSIONS 2 × 1.3 × 2 in
    COLOR Black, FDE*
    TUBE SIZE 30mm, 34mm
     
  •  
    WEIGHT 0.1 lbs
    DIMENSIONS 2 × 1.3 × 2 in
    COLOR Black, FDE*
  • Out of stock
     
    WEIGHT 0.1 lbs
    DIMENSIONS 2 × 1.3 × 2 in
    OPTIC Aimpoint Acro, Aimpoint Micro, Leupold Deltapoint Pro, Trijicon RMR/SRO

Title

Go to Top