• LOW VIS ASSAULT CARRIER

    240,00275,00
     
    • he Low Vis Assault Carrier (LVC) will only hold Velocity Systems Ultra Low-Visibility (ULV) Plates and/or the ULV Soft Armor Inserts. The LVC will not hold SAPI or shooter/swimmer cut plates.
    • 500 Denier Cordura outer carrier
    • SwiftClip® attachment system to don/doff placards and chest rigs
    • Integrated Admin Pouch on upper chest with loop face
    • Kangaroo pouch for magazine inserts
    • Elastic loops on interior to route comm wires
    • Elastic pouches on the cummerbund for magazines or radios
    • Armor/Plates Sold Separately
    • Two Cummerbund Options: Low-Profile Elastic (CBN1) & Molle, Plate Pocket (CBN6)
    • 100% Made in the USA
  • LOW VIS CARRIER

    225,00230,00
     
    • The Low Vis Carrier (LVC) will only hold Velocity Systems Ultra Low-Visibility (ULV) Plates and/or the ULV Soft Armor Inserts. The LVC will not hold SAPI or shooter/swimmer cut plates.
    • 500 Denier Cordura outer carrier
    • SwiftClip® attachment system to don/doff placards and chest rigs
    • Elastic loops on interior to route comm wires
    • Armor Sold Separately
    • 100% Made in the USA
  •  
    • Convert any carrier with molle on front and rear, to a carrier with front flap access and an adjustable cummerbund
    • Flaps have molle webbing on outside, no webbing space is lost
    • Interior mesh pockets with plate straps hold 6"x"6 or 6"x8" side armor inserts
    • 100% Made in the USA
  • CW BELT

    48,00
     
    • Lightweight, low profile cummerbund replacement option
    • 2 Quick Release Buckles
    • 1½ ” Webbing
    • 100% made in the USA
    Belt Size: Small/Medium Fits Waist: 30” – 42” Large/X-Large Fits Waist: 40” – 52”
  •  
    • Attaches via Helium Whisper® attachment system
    • Designed to hold up to .75” thick side plates
    • Designed to attach to most MOLLE compatible cummerbunds
    • Can be worn on the inside or outside of the cummerbund depending on location of MOLLE and user preference
    • Plate is secured with a foldable 500D Cordura flap that adheres with a hook and look fastener
    • Set (Right and Left Plate Pocket)
    • Weight: 2.08oz
    • Material: 500D Cordura Nylon
    • 100% made in the USA
  •  
    • Can be setup for dual or single Quarter Flap opening
    • Provides 6”x6” Side Plate pockets
    • Allows for easy reconfiguration for mission specific needs
    • 100% Made in the USA
  • LAW ENFORCEMENT PLATE CARRIER

    219,00257,00
     
    • Sleek and clean look
    • Mesh lining
    • Quarter flaps and placards sold separately
    • S/M LEPC fits size Small, Medium and 10"x12" sized plates up to 1.2" thick and below
    • L/XL LEPC fits Large and X-Large plates up to 1.2" thick and below
    • Holds SAPI, Shooter, and Swimmer Plates
    • Armor/Plates Sold Separately
    • Three Cummerbund Options: Low-Profile Elastic (CBN1), Low-Profile Elastic With Dividers (CBN1D) & Standard MOLLE, Plate Pocket (CBN3)
    • 100% Made in the USA
  •   Hard Armor: Size small holds small ESAPI shape plates ONLY. Size medium, large, and x-large hold 10"x12" Shooters/Swimmers cut plates or ESAPI shape plates of corresponding sizes to the carrier. Soft Armor: The soft armor inserts intended for this carrier are the Velocity Systems LPAC/LPAAC Cut Soft Armor. This is a custom cut of soft armor designed for this carrier. Other manufacturers' soft armor may not fit correctly, contact us to inquire about fitting if using other soft armor.
    • Armor/Plates Sold Separately
    • Front kangaroo pouch
    • Two Cummerbund Options: Low-Profile Elastic (CBN1) & Standard MOLLE, Plate Pocket (CBN3)
    • Quarter flaps, front flaps and placards sold separately
    • 100% Made in the USA
     
  •   Includes:
    • (1) SCARAB™ LT Carrier Front and Rear
    • (1) Set of ULTRAcomp™ Shoulder Straps & Stretch Padded Sleeves
    • (1) Front Flap
    • (1) Set of Quarter Flaps
    • (1) Zip-On Back Panel
    • (4) Size Appropriate Cummerbunds to configure Front or Quarter flap entry
    100% Made in the USA
  • Out of stock
     
    • Low profile, light weight general purpose chest rig
    • Carries four 5.56mm magazines (6.8mm or similar sized)
    • Three general purpose pouches
    • Three rows of PALS webbing on sides of chest rig
    • Built in map pocket with a VELCRO® Brand closure
    • Loops to route antennas, wires and hydration bladder tubing
    • Four one inch ITW-Nexus side release buckles
    • Designed to mount to front of Low-Profile Armor Carrier
    • Comes with our Standard H-Harness but is now being offer with the option of our ULTRAcomp 2" H-Harness or our ULTRAcomp 3" H-Harness
    • 100% Made in the USA
  • Out of stock
     
    • Carries 4ea 5.56mm mags, 2 pistol mags, up to 2 small radios
    • Two GP pockets
    • Loops to route antennas, wires and hydration bladder tubing
    • Four one inch ITW-Nexus side release buckles
    • Designed to mount to front of Low-Profile Armor Carrier
    • Comes with our Standard H-Harness but is now being offered with the option of our ULTRAcomp 2" H-Harness or our ULTRAcomp 3" H-Harness
    • Built in map pocket with a VELCRO® Brand closure
    • 100% Made in the USA
  •  
    • 500 denier Cordura Outer
    • PALS webbing on front, rear and side exterior
    • SwiftClip® Attachment System
    • Front and rear plate pockets are accessed externally
    • Integrated admin pouch and kangaroo pouch
    • Drag handle on upper rear
    • Groin protector ready
    • Two Cummerbund Options: Low-Profile Elastic (CBN1) & Standard MOLLE, Plate Pocket (CBN3)
    • 100% Made in the USA
       
  •  
    • SC13 setup comprised of SCARAB™ LE front panel, SCARAB™ LT back panel, SCARAB™ LT/LE Cummerbund and removable Front Flap
    • Removable Front Flap with three rows of loop MOLLE webbing and integrated flat kangaroo pouch sized to hold our Double HK417, Double 7.62, and Triple 5.56 Magazine Insert
    • Admin pouch with two external rows of MOLLE webbing on chest
    • Back panel includes six rows of MOLLE webbing, loop on upper rear for ID and accepts Zip-On Back Panel
    • SCARAB™ LT/LE Cummerbund - lightweight and breathable with MOLLE webbing on the exterior and interior
    • 100% made in the USA
       
  •    
    • Plate pockets are sized to accommodate Stand-Alone or ICW ESAPI or Swimmer cut plates
    • S/M APC fits size Small, Medium and 10"x12" sized plates
    • L/XL APC fits Large and X-Large plates
    • Armor/Plates Sold Separately
    • Three Cummerbund Options: Low-Profile Elastic (CBN1), Low-Profile Elastic With Dividers (CBN1D) & Standard MOLLE, Plate Pocket (CBN3)
    • 100% Made in the USA
  •  
    • Patented swivel shoulder straps with D-ring attachments (US Patent No. 9,894,962)
    • Narrow ULTRAcomp™ Shoulder Straps
    • 100% Made in the USA
    • Sized to hold plate of corresponding carrier size, example size large carrier holds size large ESAPI Plates
    • Three (3) Cummerbund Options: SCARAB™ LT/LE Cummerbund, Low-Profile Elastic Cummerbund (CBN1) MOLLE, Plate Pocket Cummerbund (CBN3)

Title

Go to Top